1. Introduction
Thank you for choosing the JIGOO S300 Pro Mattress Vacuum Cleaner. This powerful handheld vacuum is designed to provide deep cleaning for mattresses, sofas, and other fabric surfaces, effectively removing dust, pet hair, and allergens. Equipped with advanced UV, ultrasonic, and heating technologies, it ensures a fresh and hygienic living environment.
Safety Warning: Always read and understand all safety instructions before using this appliance. Keep out of reach of children. Do not use on wet surfaces or for vacuuming liquids.
Figure 1: Understanding the Harm of Dust Mites and Allergens
2. Setup
2.1 Unboxing and Components
Carefully remove all components from the packaging. Ensure all parts are present: the main vacuum unit, dual dust cups, HEPA filter (pre-installed), and power cable.
Figure 2: JIGOO S300 Pro Main Unit
2.2 Initial Power Connection
The JIGOO S300 Pro is a corded vacuum cleaner. Plug the 5m (16ft) power cable into a standard electrical outlet. The unit is ready for immediate use once plugged in.
Video 1: Overview of the JIGOO Bed Vacuum Cleaner, demonstrating its features and initial use.
3. Operating Instructions
3.1 Powering On/Off
Press the power button located on the handle to turn the vacuum cleaner on or off. The ergonomic handle ensures a comfortable grip during operation.
3.2 Smart Dust Sensor and LED Display
The intelligent dust sensor provides real-time feedback on the cleanliness of your mattress via an LED display. A red light indicates a dirty surface, while a green light signifies a clean area. This allows for precise and efficient cleaning.
Figure 3: Smart Dust Sensor in Action
3.3 Advanced Cleaning Technologies
The JIGOO S300 Pro integrates multiple technologies for comprehensive cleaning:
- UV Light (254nm): The 254nm UV light effectively eliminates various allergens and harmful microorganisms from fabric surfaces.
- Ultrasonic Technology: Ultrasonic waves interfere with the nervous system of mites, helping to stop their reproduction.
- High Heating (131℉/55℃): The multi-directional heating design helps to kill mites and dehumidify your mattress, ensuring deeper and more thorough cleaning.
- Metal Brushroll: The innovative metal brushroll taps at 12,000 times per minute, dislodging deep-seated dirt and allergens without damaging fabrics.
Figure 4: Four Steps to Enhanced Mite Removal
Video 2: Demonstration of the Bed Vacuum Cleaner's UV Sanitizing function.
3.4 Multiple Uses
This deep cleaning vacuum is ideal for various flat fabric surfaces, including:
- Beds and Mattresses
- Sofas and Couches
- Pillows and Blankets
- Clothes and Cribs
Note:
- Not suitable for long velvet/long fluff carpets or hard floors.
- Do not use anywhere with water.
Figure 5: Versatility for Multiple Fabric Surfaces
4. Maintenance
4.1 Cleaning the Dual Dust Cups
The 0.5L dual-cup design separates dust and hair, preventing filter clogging. To clean:
- Click to unlock dust cups and open the cap.
- Empty the contents into a waste bin.
- Rinse the dust cups with water and allow them to dry completely before reattaching.
Figure 6: Original Dual Cups for Efficient Filtration
4.2 Cleaning the HEPA Filter
The HEPA sealed filter can capture 99.97% of particles as tiny as 0.3 micrometers, ensuring clean air output and preventing secondary pollution. The filter is washable and reusable.
- Remove the filter from the dust cup.
- Rinse the filter under running water until clean.
- Allow the filter to air dry completely for at least 24 hours before reinserting.
We recommend replacing the HEPA filter every 4 to 6 months, depending on usage and cleaning frequency, to maintain optimal performance.
4.3 Cleaning the Brushroll
The metal brushroll can be removed for cleaning. Rotate the knob to unlock the cover and take the brushroll out. Remove any tangled hair or debris, then reinsert.
Figure 7: Easy Removal and Cleaning of Components
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Not plugged in correctly; Power outlet issue. | Ensure the power cable is securely plugged into a working outlet. |
| Low Suction | Dust cups full; Filter clogged; Brushroll obstructed. | Empty dust cups; Clean/replace filter; Clear brushroll of obstructions. |
| UV Light Not On | Vacuum lifted too high from surface. | Ensure the vacuum head is in close contact with the surface. The UV light is designed to turn off when lifted for safety. |
| Abnormal Noise | Obstruction in brushroll or suction path. | Turn off and unplug the unit. Inspect and remove any foreign objects from the brushroll or suction port. |
6. Specifications
- Model Name: S300 Pro
- Power: 500 Watts
- Suction Power: 13KPa
- Main Brush Speed: 12,000/min
- Filter Type: HEPA Filter (washable, reusable)
- Dust Cup Capacity: 0.5 Liters (Dual-cup design)
- Cable Length: 5m (16.4 ft)
- Hot Wind Temperature: 131℉ (55℃)
- Noise Level: 75dB
- Product Dimensions: 12.79"L x 10.74"W x 7.48"H
- Item Weight: 5.49 pounds
- Special Features: Smart Dust Sensor, UV Light, Ultrasonic Technology, Metal Brushroll
7. Warranty and Support
The JIGOO S300 Pro Mattress Vacuum Cleaner comes with a 12-month hassle-free warranty. If you encounter any problems or have questions regarding your product, please contact JIGOO customer support for assistance. Our dedicated team is committed to providing high-quality products and services.
For further support, please refer to the contact information provided on the product packaging or the official JIGOO website.
