Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GLOBE Electric 1-Light Outdoor Flush Mount Ceiling Light Fixture, Model 60000020. Please read this manual thoroughly before installation and retain it for future reference.

Image: The GLOBE Electric Sasha 1-Light Outdoor Flush Mount Ceiling Light Fixture, showcasing its matte black finish and clear glass shade.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing. All electrical connections must be in accordance with local codes and ordinances, National Electric Code (NEC), and ANSI/NFPA 70-1999.
- Ensure the mounting surface is structurally sound and can support the fixture's weight.
- Do not connect this fixture to an ungrounded electrical system.
- Use only the specified bulb type and wattage.
- Do not attempt to modify the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
Package Contents
Verify that all components are present before beginning installation:
- 1x Flush Mount Light Fixture
- 4x Glass Panes
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Sheet (this manual)
Note: Bulb (1x E26/Medium Base 60W) and dimmer switch are sold separately.

Image: A detailed view of the light fixture's internal components, showing the E26 bulb socket and the clear glass shade.
Setup and Installation
Follow these steps for proper installation of your outdoor flush mount light fixture:
- Prepare for Installation: Turn off power at the circuit breaker or fuse box. Ensure the power is completely off before proceeding.
- Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws. Ensure it is firmly attached.
- Make Electrical Connections: Connect the fixture's wires to your household wiring using wire nuts. Connect black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Mount the Fixture: Carefully align the fixture with the mounting plate and secure it with the provided screws.
- Install Glass Panes: Insert the four clear glass panes into the fixture's frame.
- Install Bulb: Screw in one E26/Medium Base 60W bulb (sold separately). Compatible with LED and incandescent bulbs.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.

Image: The GLOBE Electric Sasha light fixture installed on a ceiling above an outdoor door, demonstrating its placement and aesthetic.

Image: Two GLOBE Electric Sasha light fixtures installed on an outdoor patio ceiling, shown in a rainy environment to highlight their weather-resistant design.
Operating Instructions
This fixture operates via a standard wall light switch. For dimming functionality, ensure you use a dimmable E26 bulb and a compatible dimmer switch (both sold separately).
- On/Off: Use your existing wall switch to turn the light fixture on or off.
- Dimming (Optional): If a compatible dimmer switch is installed, adjust the dimmer to achieve your desired brightness level.
Maintenance
Regular maintenance will help prolong the life and appearance of your light fixture:
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching. Replace with an E26/Medium Base bulb, up to 60W.
- Inspection: Periodically check for any loose connections or signs of wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to fixture; Loose wiring; Faulty bulb; Faulty switch. | Check circuit breaker/fuse; Check wire connections; Replace bulb; Test/replace switch. |
| Light flickers. | Loose bulb; Incorrect bulb type for dimmer; Loose wiring. | Tighten bulb; Ensure bulb is dimmable if using a dimmer; Check wire connections. |
| Glass panes are loose. | Improper installation of glass panes. | Re-seat glass panes firmly into the frame. |
Specifications
| Brand | GLOBE |
| Model Name | Sasha |
| Part Number | 60000020 |
| Color | Matte Black, Clear Glass Shade |
| Material | Metal, Glass |
| Product Dimensions | 8"L x 8"W x 8"H (20.4 cm x 20.4 cm x 20.4 cm) |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Hardwired |
| Voltage | 120 Volts |
| Wattage | Max 60 watts |
| Bulb Base | E26 (Medium Base) |
| Light Source Type | Incandescent, LED (compatible) |
| Dimmable | Yes (with compatible dimmer switch and bulb) |
| Weather Resistance | Water Resistant (suitable for exposure to wind, sun, and rain) |
| Assembly Required | Yes |

Image: Dimensional drawing of the light fixture, indicating its 8"L x 8"W x 8"H size.
Warranty and Support
This product comes with no explicit warranty as per the manufacturer's specifications. For any questions regarding installation, operation, or troubleshooting that are not covered in this manual, please contact GLOBE Electric customer support.
For further assistance, please visit the official GLOBE Electric website or contact their customer service department.
Online Resources: GLOBE Electric Store on Amazon





