Introduction
Thank you for choosing the WallarGe HP005 Wireless Over-Ear Headphones. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new headphones. Designed for an immersive audio experience, these headphones feature 5.8GHz high-fidelity transmission, ensuring real-time synchronization and a stable connection up to 100 feet, even through walls. Enjoy extended listening sessions with up to 25 hours of playtime and wide compatibility with various audio sources.
Figure 1: WallarGe HP005 Wireless Over-Ear Headphones with their dedicated charging and transmission stand.
1. Setup
1.1 Package Contents
- WallarGe HP005 Over-Ear Headphones
- 5.8GHz Wireless Transmitter/Charging Stand
- Power Adapter
- Audio Cables (e.g., Optical, RCA, 3.5mm AUX - specific cables may vary)
- User Manual
1.2 Connecting the Transmitter Stand
- Connect the power adapter to the transmitter stand's DC IN port and plug it into a power outlet. The stand's power indicator should illuminate.
- Identify the audio output ports on your TV or audio source (Optical, RCA, or 3.5mm AUX).
- Connect the appropriate audio cable from your TV/audio source to the corresponding input port on the transmitter stand.
- Ensure your TV/audio source's audio output is set to the correct format (e.g., PCM for Optical output).
Figure 2: The transmitter stand offers wide compatibility with Optical, RCA, and 3.5mm AUX audio inputs for various TV and audio sources.
1.3 Initial Pairing and Charging
- Place the headphones onto the charging cradle of the transmitter stand. Ensure they are correctly seated.
- The headphones will automatically power on and attempt to pair with the transmitter. A successful connection is indicated by a stable light on both the headphones and the transmitter (refer to LED indicators section for details).
- Allow the headphones to fully charge before first use. The charging indicator on the headphones will change when charging is complete.
2. Operating the Headphones
2.1 Power On/Off
- Power On: The headphones automatically power on when removed from the charging stand and power off when placed back on the stand.
- Manual Power On/Off: Press and hold the Power button on the headphone for approximately 3 seconds to manually power on or off.
2.2 Volume Control
The headphones feature 16 selectable volume levels for precise audio adjustment. Use the volume up (+) and volume down (-) buttons located on the earcup to adjust the listening volume.
Figure 3: The 16-level volume control allows for personalized listening without disturbing others.
2.3 5.8GHz Wireless Transmission
The WallarGe HP005 headphones utilize 5.8GHz high-fidelity wireless transmission for a stable and low-latency audio experience. This technology ensures real-time synchronization between the audio source and your headphones, eliminating delays or interruptions.
Figure 4: The 5.8GHz transmission allows two headphones to connect to a single transmitter, providing a range of up to 100 feet.
The advanced transmission technology also allows for barrier-free signal penetration through walls, providing consistent audio quality even when moving between rooms, up to a distance of 100 feet (approximately 30 meters).
Figure 5: Enjoy seamless audio throughout your home with barrier-free transmission up to 100 feet.
2.4 RGB Stand Lighting
The charging stand features an RGB lighting button. Press this button to cycle through various neon colors or activate an automatic color-changing mode, adding an aesthetic touch to your setup.
Figure 6: The RGB stand button allows for customizable lighting effects.
3. Maintenance
3.1 Cleaning
- Use a soft, dry cloth to clean the headphones and the transmitter stand.
- For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
- Do not immerse the headphones or stand in water.
3.2 Storage
- When not in use, store the headphones on the charging stand to keep them charged and ready for use.
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from headphones. |
|
|
| Poor audio quality or static. |
|
|
| Headphones not charging. |
|
|
5. Specifications
- Model Number: HP005
- Brand: WallarGe
- Manufacturer: BIIOONES (as per product data, though brand is WallarGe)
- Transmission Technology: 5.8GHz Wireless
- Wireless Range: Up to 100 feet (30 meters)
- Audio Inputs (Transmitter): Optical, RCA, 3.5mm AUX
- Playtime: Up to 25 hours (on a full charge)
- Earcups: Scientific D-shaped ergonomic design
- Volume Control: 16 selectable levels
Figure 7: Enjoy extended listening sessions with up to 25 hours of playtime.
Figure 8: The D-shaped earcups provide a comfortable and secure fit for extended wear.
6. Warranty Information
Specific warranty details for the WallarGe HP005 headphones are not provided in the product information. Please refer to the retailer's return policy or contact the seller directly for warranty terms and conditions.
Information regarding spare parts availability and software update guarantees is currently unavailable.
7. Customer Support
For any questions, technical assistance, or support regarding your WallarGe HP005 Wireless Over-Ear Headphones, please contact the seller or manufacturer through the platform where you purchased the product.
Please have your model number (HP005) and purchase details ready when contacting support.
