GAMEMAX ICEBURG 360 Infinity BK ARGB 360mm Liquid CPU Cooler User Manual

1. Introduction

Thank you for choosing the GAMEMAX ICEBURG 360 Infinity BK ARGB 360mm Liquid CPU Cooler. This all-in-one (AIO) liquid cooling system is designed to provide efficient thermal management for high-performance processors, featuring vibrant ARGB lighting and a rotatable pump head for aesthetic customization. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.

2. Safety Information

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in damage to the product, your computer components, or personal injury.

• Ensure your computer is powered off and disconnected from the power source before installation.
• Handle components with care to avoid damage.
• Do not open the liquid cooling system; it is a sealed unit. Opening it will void the warranty and may cause leaks.
• Keep the product away from liquids and extreme temperatures.
• Use only the provided accessories and mounting hardware.

3. Package Contents

Verify that all components are present in the package:

• GAMEMAX ICEBURG 360 Infinity BK ARGB Liquid CPU Cooler (Radiator, Pump, and Tubing)
• 3 x 120mm ARGB PWM Fans
• Mounting Hardware for Intel Sockets (LGA 1851/1700/1200/115X/2066/2011-3)
• Mounting Hardware for AMD Sockets (AM5/AM4)
• Thermal Paste
• Fan Splitter Cable (PWM)
• ARGB Controller/Cables (if applicable, check specific model for inclusion)
• User Manual

Image: Overview of the GAMEMAX ICEBURG 360 Infinity BK ARGB Liquid CPU Cooler, showing the radiator, three fans, pump, and tubing.

4. Setup and Installation

Before beginning, ensure your computer is powered off and unplugged. Refer to your motherboard and PC case manuals for specific instructions on component installation and clearance.

4.1 Prepare the Radiator and Fans

1. Attach the three 120mm ARGB PWM fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case (typically pushing air through the radiator and out of the case, or pulling air in).
2. Connect the PWM fan cables to the included fan splitter cable.
3. Connect the ARGB cables from the fans to each other in a daisy chain, then connect the final ARGB cable to your motherboard's 5V ARGB header or an ARGB controller.

4.2 Install the Mounting Bracket on the Pump

Select the appropriate mounting bracket for your CPU socket (Intel or AMD) and attach it to the pump block according to the instructions provided with the hardware kit.

4.3 CPU Preparation

Clean the CPU surface thoroughly with isopropyl alcohol to remove any old thermal paste or residue. Apply a small amount of the provided thermal paste to the center of the CPU's integrated heat spreader (IHS).

4.4 Mounting the Pump Block

1. Carefully place the pump block onto the CPU, aligning the mounting holes with the backplate/standoffs.
2. Secure the pump block with the appropriate screws, tightening them in a diagonal pattern until snug. Do not overtighten.
3. Connect the pump's 3-pin power connector to an available fan header on your motherboard (e.g., AIO_PUMP or CPU_FAN).
4. Connect the pump's ARGB cable to your motherboard's 5V ARGB header or an ARGB controller.

Image: Close-up of the pump head, illustrating its 270-degree rotatable cover for logo orientation after installation.

4.5 Radiator Installation

Mount the radiator with the attached fans into your PC case in an appropriate location (e.g., top, front, or side panel), ensuring proper screw alignment and secure fastening.

Image: Diagram showing compatibility with mainstream Intel (LGA 1851/1700/1200/115X/2066/2011-3) and AMD (AM5/AM4) platforms.

5. Operating Instructions

5.1 ARGB Lighting Control

The ARGB lighting on the pump and fans can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync) or a dedicated ARGB controller (if included or purchased separately). Ensure the 5V ARGB headers are correctly connected.

Image: The pump and fans displaying the ARGB lighting and infinity mirror design, highlighting the aesthetic features.

5.2 PWM Fan Control

The 120mm PWM fans automatically adjust their speed based on CPU temperature, controlled by your motherboard's BIOS settings or fan control software. You can configure custom fan curves to balance cooling performance and noise levels.

Image: Close-up of a fan, detailing its specifications such as 62.82 CFM maximum air volume, 1.89mm H2O maximum wind pressure, ≤32 dBA running noise, and 800-2000 RPM operating speed.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your liquid cooler.

• Dust Cleaning: Periodically clean the radiator fins and fan blades with compressed air to remove dust buildup. Dust can impede airflow and reduce cooling efficiency.
• Visual Inspection: Regularly check the tubing and connections for any signs of leaks or damage. The EPDM tubing is designed for durability and leak prevention, but visual checks are recommended.
• Pump Operation: Listen for any unusual noises from the pump. A properly functioning pump should operate quietly.

7. Troubleshooting

If you encounter issues with your GAMEMAX ICEBURG 360 Infinity BK, refer to the following common troubleshooting steps:

• No Power/Fans Not Spinning:
  • Check all power connections to the pump and fans.
  • Ensure the pump is connected to a dedicated pump header or a CPU_FAN header configured for full power in BIOS.
  • Verify fan splitter cable connections.
• High CPU Temperatures:
  • Confirm the pump is running (you may feel a slight vibration).
  • Check if the pump block is securely mounted to the CPU. Re-seat if necessary, ensuring even pressure.
  • Verify thermal paste application. Reapply if it appears insufficient or uneven.
  • Ensure radiator fins are clean and not obstructed by dust.
  • Check fan orientation for proper airflow.
• ARGB Lighting Not Working:
  • Ensure all ARGB cables are correctly connected to a 5V ARGB header (not 12V RGB).
  • Check your motherboard's ARGB software or external controller settings.
  • Verify the ARGB daisy chain connections between components.
• Unusual Noise:
  • Identify if the noise is coming from the fans or the pump.
  • If from fans, check for obstructions or loose mounting. Adjust fan curves in BIOS to reduce speed if noise is excessive.
  • If from the pump, ensure the pump is mounted correctly and not vibrating against other components. Slight gurgling might occur initially as air settles, but persistent loud noise could indicate an issue.

8. Specifications

Image: Technical diagram illustrating the dimensions of the radiator, fans, and pump block for the GAMEMAX ICEBURG 360 Infinity BK.

Image: Detailed view of the radiator's core cooling technology, showing the internal structure designed for efficient heat exchange.

9. Warranty Information

This GAMEMAX ICEBURG 360 Infinity BK Liquid CPU Cooler comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification or repair. Please retain your proof of purchase for warranty claims.

10. Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact GAMEMAX customer service through their official website or the retailer where the product was purchased. Please have your product model number (GMX-ICB-360ARGB) and proof of purchase ready when contacting support.

Official GAMEMAX Website: www.gamemaxpc.com