Introduction
The NEEWER UA028 Counterweight is designed to provide enhanced stability and balance for various photography and videography equipment. This all-metal counterweight, weighing 13.2lb (6kg), features a robust clamp with a long locking lever, making it suitable for C stands, boom arms, light stands, and grip arms. Proper use ensures the safety and stability of your valuable gear.
Safety Information
- Always ensure the counterweight is securely fastened to prevent accidental slipping or falling.
- Verify that the equipment being balanced does not exceed the counterweight's capacity or the stand's stability limits.
- Regularly inspect the clamp and locking lever for any signs of wear or damage.
- Keep hands clear of moving parts during installation and adjustment.
- Store the counterweight in a safe place when not in use to prevent injury or damage.
Package Contents
- 1 x NEEWER UA028 13.2lb/6kg Counterweight with Lock Lever
Setup and Installation
Follow these steps to properly attach and secure the counterweight to your equipment.
- Loosen the Locking Knob: Rotate the locking knob counter-clockwise to open the clamp sufficiently to fit around the desired pole or arm.
- Position the Counterweight: Slide the counterweight onto the pole or arm. Adjust its position as needed to achieve optimal balance for your setup.
- Tighten the Locking Knob: Once positioned, rotate the locking knob clockwise until it is completely tight. Ensure a stable connection to prevent any accidental slipping or movement.
Image: Steps for convenient mounting of the counterweight.
Adjustable Clamp
The clamp is designed to accommodate poles with diameters between 1 inch (25mm) and 1.4 inches (35mm). This adjustable range ensures compatibility with various light stands, boom arms, and grip arms.
Image: Detail of the adjustable clamp opening.
Ergonomic Locking Lever
The extended locking lever provides an ergonomic grip, allowing for easier fastening and loosening of the counterweight compared to standard knob designs. This design enhances user comfort and ensures a secure attachment.
Image: Comparison of the ergonomic locking lever.
Operating Instructions
The primary function of the NEEWER UA028 counterweight is to provide stability and balance to your photography and videography setups, especially when using extended or heavy equipment.
- Balancing Boom Arms: Attach the counterweight to the opposite end of a boom arm from your light or camera to prevent tipping and ensure a stable overhead setup. Adjust its position along the arm to fine-tune the balance.
- Stabilizing Light Stands: For tall or heavily loaded light stands, especially those with large modifiers, attach the counterweight to the base or lower sections to lower the center of gravity and reduce the risk of tipping.
- C-Stand Applications: Use the counterweight with C-stands to balance grip arms holding flags, reflectors, or other accessories, ensuring the stand remains upright and secure.
Image: Counterweight enhancing stability on a boom arm setup.
Image: Examples of wide application in various studio setups.
Maintenance
- Cleaning: Wipe the counterweight with a soft, dry cloth to remove dust and debris. For stubborn dirt, use a slightly damp cloth and dry thoroughly. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check the locking lever and clamp mechanism for any signs of wear, corrosion, or damage. Ensure the lever operates smoothly and the clamp tightens securely.
- Storage: Store the counterweight in a dry environment, away from extreme temperatures and corrosive substances.
Troubleshooting
- Issue: Counterweight slips or does not hold securely.
Solution: Ensure the locking lever is fully tightened. Verify that the pole diameter is within the 1"-1.4" (25-35mm) clamp range. Inspect the clamp surfaces for any obstructions or damage. - Issue: Equipment still feels unstable after attaching counterweight.
Solution: Adjust the position of the counterweight along the arm or stand to find the optimal balance point. Consider if additional counterweights are needed for extremely heavy or extended setups. Ensure the stand itself is rated for the total load. - Issue: Locking lever is stiff or difficult to operate.
Solution: Apply a small amount of silicone-based lubricant to the threads of the locking mechanism. Do not force the lever if it is stuck.
Specifications
| Model | UA028 |
| Material | Iron |
| Weight | 13.2lb / 6kg |
| Clamp Range | 1" - 1.4" (25 - 35mm) |
| Dimensions (Approx.) | 5.7" x 4.8" x 5.9" (14.5cm x 12.2cm x 14.9cm) |
Image: NEEWER UA028 Counterweight dimensions.
Warranty and Support
For warranty information or technical support, please refer to the official NEEWER website or contact their customer service directly. Keep your purchase receipt for any warranty claims.
