Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Zinus Soren Bed Frame. Please read all instructions carefully before assembly and use to ensure safe and proper functioning of the product.
Safety Warnings
WARNING:
- Do not exceed a total weight of 318 kg (700 lbs) on the bed frame.
- Assemble carefully according to the instructions to prevent instability or collapse.
- Keep all small parts away from children during assembly.
- Ensure all bolts are securely tightened before use.
- Periodically check and re-tighten all bolts to maintain stability.
Package Contents
Before beginning assembly, verify that all parts are present. The package should contain:
- Headboard
- Footboard
- Side Rails
- Slats
- Support Legs
- Assembly Hardware (bolts, Allen key, ratchet wrench)
- Installation Manual
If any parts are missing or damaged, please contact Zinus customer support.
Setup and Assembly
The Zinus Soren Bed Frame is designed for straightforward assembly. It is recommended to have two people for easier installation.
- Unpack Components: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Match each component to the corresponding number in the provided installation manual.
- Attach Side Rails to Headboard: Securely attach the side rails to the headboard using the provided bolts and tools. Ensure a snug fit.
- Attach Footboard: Connect the footboard to the other end of the side rails.
- Install Support Legs: Attach any central support legs to the frame as indicated in the manual.
- Place Slats: Lay the metal slats across the frame. Ensure they are evenly spaced and secured according to the instructions. The platform is designed to support any mattress directly.
- Final Tightening: Double-check all bolts and connections to ensure they are fully tightened for stability.
Image: All components of the Zinus Soren Bed Frame laid out, ready for assembly. This includes the headboard, footboard, side rails, and metal slats.
Image: A diagram illustrating the dimensions of the Zinus Soren Bed Frame, including length (206cm), width (181cm), headboard height (104cm), and footboard height (43cm).
Usage and Operation
Once assembled, the Zinus Soren Bed Frame is ready for use. Place your mattress directly onto the metal slat platform. No box spring is required.
- Mattress Compatibility: The platform is designed to support any type of mattress.
- Under-Bed Storage: The 26 cm (10.2 inches) clearance under the mattress platform provides ample space for storage.
Image: The Zinus Soren Bed Frame fully assembled with a mattress and bedding, showcasing its modern design and under-bed clearance.
Maintenance
To ensure the longevity and appearance of your Zinus Soren Bed Frame, follow these simple maintenance guidelines:
- Cleaning: Wipe the frame with a dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Bolt Check: Periodically (e.g., every 3-6 months) check all assembly bolts and re-tighten them if necessary. This helps maintain the frame's stability and prevents squeaking.
- Avoid Overloading: Do not place excessive weight on the frame beyond the specified limit of 318 kg.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose bolts or incorrect assembly. | Ensure all bolts are securely tightened. Review assembly instructions to confirm correct installation of all parts, especially support legs. |
| Squeaking noises. | Loose connections or friction between metal parts. | Tighten all bolts. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to connection points, avoiding contact with wood accents. |
| Missing parts during assembly. | Packaging error. | Contact Zinus customer support immediately with your product model number and a description of the missing parts. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | EU-FBOBH2-41H |
| Dimensions (L x W x H) | 206 cm x 181 cm x 104 cm (81.1" x 71.3" x 40.9") |
| Mattress Size Compatibility | 180 x 200 cm (Super King) |
| Under-Bed Clearance | 26 cm (10.2 inches) |
| Weight Capacity | 318 kg (700 lbs) |
| Material | Engineered Wood and Steel |
| Color | Black |
| Assembly Required | Yes |
| Package Contents | Headboard, Installation Manual, Slats |
Warranty Information
The Zinus Soren Bed Frame comes with a 5-year limited warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For full warranty terms and conditions, please refer to the official Zinus website or contact customer support.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Zinus customer support:
- Website: Visit the official Zinus website for FAQs and support resources.
- Contact Form: Use the contact form available on the Zinus website.
- Phone: Refer to the Zinus website for regional contact numbers.
Please have your model number (EU-FBOBH2-41H) and proof of purchase ready when contacting support.
