1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Duravit WA5250000070 Wave Freestanding Bathtub Faucet. Please read these instructions carefully before installation and retain them for future reference.
The Duravit Wave series features a modern design with fluid forms and precise edges. This freestanding single-lever mixer includes a ceramic mixing system and an integrated hand shower with a flexible hose. It incorporates AirPlus technology for a soft water jet and is finished in brushed stainless steel.
This image displays the complete Duravit Wave freestanding bathtub faucet. It features a tall, cylindrical body in brushed stainless steel, a single-lever mixer, a curved spout, and an integrated hand shower with a flexible hose, all mounted on a circular base.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Installation should be performed by a qualified professional in accordance with local plumbing and building codes.
- Ensure the water supply is turned off before beginning any installation or maintenance work.
- Do not use abrasive cleaners or harsh chemicals on the faucet's surface, as this can damage the finish.
- Protect the product from freezing temperatures.
- Check all connections for leaks after installation and before regular use.
3. Package Contents
Verify that all components are present before beginning installation:
- Duravit Wave Freestanding Bathtub Mixer
- Hand Shower
- Shower Hose
- Mounting Instructions
4. Setup and Installation
Refer to the included mounting instructions for detailed, step-by-step installation guidance. The following is a general overview:
- Prepare the Installation Area: Ensure the floor is level and structurally sound to support the faucet. Mark the desired location for the faucet base.
- Water Supply Connections: Install the hot and cold water supply lines according to local plumbing codes. Ensure proper sealing to prevent leaks.
- Mount the Faucet Base: Secure the freestanding faucet base to the floor using the provided hardware. Ensure it is stable and level.
- Connect Faucet to Supply Lines: Connect the faucet's hot and cold water inlets to the corresponding supply lines. Tighten all connections securely, but do not overtighten.
- Install Hand Shower and Hose: Attach the shower hose to the faucet and the hand shower. Place the hand shower in its integrated holder.
- Test for Leaks: Slowly turn on the main water supply and check all connections for any signs of leakage. Address any leaks immediately.
A detailed technical drawing illustrating the front view dimensions of the Duravit Wave freestanding bathtub faucet. Key measurements include overall height, spout reach, and the height of the hand shower holder, providing essential information for installation planning.
A technical drawing showing the side view dimensions of the Duravit Wave freestanding bathtub faucet. This view provides measurements for the base diameter and the overall height from a different perspective, crucial for precise installation.
5. Operating Instructions
The Duravit Wave faucet is designed for ease of use:
- Water Flow and Temperature: The single-lever handle controls both water flow and temperature. Lift the handle to increase flow and move it left for hot water or right for cold water.
- Hand Shower Operation: To activate the hand shower, pull the diverter knob located on the faucet body. Push it back down to return water flow to the main spout.
- AirPlus Technology: The faucet incorporates AirPlus technology, which enriches the water jet with air, creating a softer, more voluminous, and splash-free stream.
An icon representing Duravit's AirPlus technology, which illustrates how air is mixed into the water stream to create a softer, more voluminous jet.
6. Care and Maintenance
Proper care will ensure the longevity and appearance of your brushed stainless steel faucet:
- Regular Cleaning: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for stainless steel.
- Avoid Harsh Chemicals: Do not use abrasive sponges, scouring pads, or cleaners containing ammonia, bleach, or acids, as these can damage the brushed finish.
- Rinse and Dry: After cleaning, rinse the faucet thoroughly with clean water and dry it immediately with a soft cloth to prevent water spots and streaks.
- Aerator Maintenance: Periodically unscrew and clean the aerator at the end of the spout to remove any mineral deposits that may affect water flow.
7. Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; low water pressure in the building. | Clean or replace aerator; ensure shut-off valves are fully open; consult a plumber for building water pressure issues. |
| Leaking from Spout/Handle | Loose connections; worn O-rings or cartridge. | Check and tighten connections; replace O-rings or ceramic cartridge (professional assistance recommended). |
| Water Temperature Issues | Improperly adjusted water heater; faulty ceramic cartridge. | Check water heater settings; replace ceramic cartridge (professional assistance recommended). |
| Hand Shower Not Diverting | Diverter mechanism stuck or faulty. | Ensure diverter knob is fully pulled/pushed; clean diverter if accessible; contact support if issue persists. |
If these solutions do not resolve the issue, please contact Duravit customer support or a qualified plumber.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Duravit |
| Model Number | WA5250000070 |
| Product Dimensions (L x W x H) | 5 x 31.2 x 94.7 cm |
| Item Weight | 5.31 Kilograms |
| Color | Brushed Stainless Steel |
| Finish Type | Polished |
| Material | QK6AE (Stainless Steel for handle) |
| Installation Method | One Hole |
| Handle/Lever Material | Stainless Steel |
| Included Components | Freestanding Bathtub Faucet, Hand Shower, Shower Hose |
| Batteries Required/Included | No |
| Country of Origin | China |
| Date First Available | May 31, 2023 |
9. Warranty and Support
Warranty: The Duravit WA5250000070 Wave Freestanding Bathtub Faucet comes with a 5-year warranty. This warranty covers manufacturing defects under normal use and service. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, spare parts, or warranty inquiries, please contact Duravit customer service. Refer to the official Duravit website or your purchase documentation for current contact information.
Online Resources: Additional information, FAQs, and product registration may be available on the official Duravit website: www.duravit.com
