1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your INSPIRE LED Panel ANVIK Ceiling Light. Please read this manual thoroughly before installation and keep it for future reference.
Figure 1: The INSPIRE LED Panel ANVIK Ceiling Light seamlessly integrated into a modern kitchen ceiling, providing bright, uniform illumination.
2. Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury to persons, read and follow all warnings and instructions carefully.
- Always disconnect power at the fuse or circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes.
- Do not install this fixture in wet locations. It is designed for indoor use only (IP20 rating).
- Ensure the mounting surface can support the weight of the fixture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and pose safety risks.
- Avoid direct eye exposure to the light source when the fixture is on.
3. Package Contents
Carefully unpack the product and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer support immediately.
- INSPIRE LED Panel ANVIK Ceiling Light
- Mounting accessories (screws, anchors, etc.)
- User Manual (this document)
4. Setup and Installation
The INSPIRE LED Panel ANVIK can be installed either by surface mounting directly to the ceiling or by recessed installation into a false ceiling. Refer to the diagrams below for guidance.
4.1 Dimensions
Figure 2: Product dimensions. The panel measures 59.5 cm x 59.5 cm with a slim profile of 1.35 cm.
Before installation, ensure the chosen location has sufficient space for the fixture's dimensions (59.5 cm x 59.5 cm x 1.35 cm).
4.2 Installation Methods
Figure 3: Installation options for the LED panel. Method A shows surface mounting, while Method B illustrates recessed installation into a false ceiling.
- Surface Mounting (Method A):
- Mark the drilling points on the ceiling according to the fixture's mounting holes.
- Drill holes and insert appropriate wall anchors if necessary.
- Secure the mounting bracket (if applicable) or the fixture directly to the ceiling using the provided screws.
- Connect the electrical wiring (Live, Neutral, Earth) to the fixture's terminal block, ensuring correct polarity.
- Attach the LED panel to the secured mounting points.
- Recessed Installation (Method B):
- Prepare an opening in the false ceiling that matches the fixture's dimensions (59.5 cm x 59.5 cm).
- Connect the electrical wiring (Live, Neutral, Earth) to the fixture's terminal block.
- Carefully insert the LED panel into the prepared opening, ensuring the retaining clips (if present) secure it firmly.
After installation, restore power and test the light fixture.
5. Operating Instructions
The INSPIRE LED Panel ANVIK is designed for simple operation. Once correctly installed and connected to the main power supply, it can be controlled via a standard wall switch.
- Turning On/Off: Use the wall switch connected to the fixture to turn the light on or off.
- Light Output: The panel provides a bright 3900 lumens of light, suitable for illuminating areas up to 10 m².
- Color Temperature: The light emits a cool white light at 6000K, ideal for functional lighting in offices, kitchens, or hallways.
Figure 4: The 6000K cool white light from the INSPIRE LED Panel ANVIK provides clear and functional illumination, as shown in a kitchen setting.
6. Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your LED panel.
- Cleaning: Before cleaning, ensure the power supply to the fixture is disconnected. Use a soft, dry, or slightly damp cloth to wipe the surface of the panel. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Reparability: This LED panel features an integrated LED that is designed to be reparable. In the event of a malfunction or technical issue, individual components may be replaced, extending the product's lifespan and reducing waste. For repairs, it is recommended to contact a qualified technician or the manufacturer's support.
7. Troubleshooting
If you encounter issues with your INSPIRE LED Panel ANVIK, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch; damaged LED driver. | Check circuit breaker/fuse. Ensure all wiring connections are secure. Test the wall switch. If the issue persists, contact a qualified electrician or customer support. |
| Light flickers or dims. | Unstable power supply; loose connection; incompatible dimmer (if applicable); faulty LED driver. | Verify stable power. Check wiring. Ensure no dimmer is used unless specified as compatible. Contact support if flickering continues. |
| Light is not as bright as expected. | Dust accumulation on the panel; incorrect installation. | Clean the panel surface. Review installation steps to ensure proper setup. |
For problems not listed above, or if solutions do not resolve the issue, please contact customer support.
8. Specifications
Detailed technical specifications for the INSPIRE LED Panel ANVIK Ceiling Light:
| Attribute | Value |
|---|---|
| Brand | Inspire |
| Model Name | ANVIK LED Panel |
| Manufacturer | ADEO |
| Product Dimensions | 59.5 x 59.5 x 1.35 cm |
| Weight | 2.15 kg |
| Power Consumption | 27.2 W |
| Light Output (Lumen) | 3900 lm |
| Color Temperature | 6000K (Cool White) |
| Material | Aluminum |
| Ingress Protection (IP) Rating | IP20 (Indoor use only) |
| Installation Type | Ceiling Mount, Recessed |
| Power Source | Corded Electric |
| Special Features | Energy-efficient, Durable, Reparable LED panel |
Figure 5: Visual summary of key product specifications, including coverage area, dimensions, power, and light output.
9. Warranty and Support
The INSPIRE LED Panel ANVIK is designed for durability and reparability, indicating a commitment to product longevity. For specific warranty terms and conditions, please refer to the product packaging or contact your retailer.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts for reparable components, please contact INSPIRE customer support. Keep your purchase receipt and product model information (ANVIK, Model Number: 3276007230307) ready when contacting support.
You can find more information about INSPIRE products and support on the official INSPIRE store page: INSPIRE Store.
