Seauto Seal SE Robotic Pool Vacuum User Manual

1. Introduction

The Seauto Seal SE Robotic Pool Vacuum is an advanced, cordless automatic pool cleaner designed to provide effortless cleaning for your swimming pool. It features intelligent path planning, powerful suction, and wall-climbing capabilities to ensure comprehensive cleaning of both pool floors and walls. This manual will guide you through the setup, operation, and maintenance of your new robotic pool cleaner.

2. Safety Information

Please read all safety instructions carefully before operating the Seauto Seal SE Robotic Pool Vacuum. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Ensure the pool vacuum cleaner is fully charged before its first use and after every cleaning cycle.
• Always turn off and remove the cleaner from the pool before performing any maintenance or cleaning tasks.
• Do not operate the cleaner if the charging port or battery compartment is wet.
• Keep hands, hair, and loose clothing away from moving parts of the cleaner.
• Do not allow children to operate or play with the pool cleaner.
• Use only the original charger and battery provided by Seauto.
• Store the cleaner in a cool, dry place away from direct sunlight when not in use.

3. What's in the Box

Upon opening your Seauto Seal SE Robotic Pool Vacuum package, please verify that all components listed below are present and in good condition:

Image: Components included in the Seauto Seal SE Robotic Pool Vacuum package.

• 1 x Seauto Seal SE Pool Cleaner
• 1 x Charger Adapter
• 1 x Retrieval Hook
• 1 x Filter Basket
• 1 x User Manual
• 1 x Product Package

4. Setup

4.1 Initial Charging

Before the first use, fully charge the robotic pool cleaner. The battery is designed for easy replacement and long-lasting performance.

Image: The robotic pool cleaner connected to its charger, indicating robust battery life and charging time.

Connect the charger to the charging port on the cleaner. The LED indicator will turn green when fully charged. Ensure the battery is fully charged before its first use and after every cleaning cycle to maintain optimal battery health.

4.2 Placing the Cleaner in the Pool

Once charged, carefully place the cleaner into the pool. Ensure it is fully submerged before activating it.

5. Operating Instructions

5.1 Automatic Cleaning

The Seauto Seal SE operates automatically using intelligent path planning and sonar navigation. Simply press the power button, and the cleaner will begin its cycle, scrubbing dirt from pool floors and walls.

Image: The robotic pool cleaner demonstrating its powerful suction, effectively collecting leaves, sand, soil, and hair from the pool floor.

The cleaner is equipped with self-developed 3D-Navi technology and multiple sensors to enhance wall-climbing capabilities and ensure high clean coverage. It can climb and scrub stairs and baja shelves if they are deeper than 19.7 inches (0.5 meters).

Image: The robotic pool cleaner demonstrating its wall-climbing capability, providing an ultimate clean by scrubbing both pool floor and walls.

5.2 Suction Power

With a maximum suction power of up to 45,000 Pa, the Seal SE can easily capture various types of debris, including sand, small leaves, and other stubborn dirt from the pool floor.

5.3 Status Indicators

The cleaner provides audio and LED alerts to indicate its working status, charging status, and when it is fully charged.

Image: Close-up of the robotic pool cleaner's control panel showing LED indicators for working status (blue), charging (red), and fully charged (green), along with an audio alert for 'I'm ready to work!'.

6. Maintenance

6.1 Filter Bin Cleaning

After each cleaning cycle, it is essential to clean the filter bin to maintain optimal performance. Unbuckle the filter bin, remove it from the cleaner, and wash out all collected debris.

Once cleaned, ensure the filter bin is dry before placing it back into the cleaner and securing it.

6.2 Battery Replacement

The Seal SE pool cleaning robot features a unique battery design that is easily replaceable, ensuring long-term usability and convenience.

Image: A hand replacing the battery of the Seauto Seal SE Robotic Pool Vacuum, highlighting its easy-to-replace design.

7. Troubleshooting

If you encounter issues with your Seauto Seal SE Robotic Pool Vacuum, please refer to the following common problems and solutions:

• Cleaner not turning on: Ensure the battery is fully charged. Check the charging connection.
• Cleaner not moving: Verify that the pool is free of large obstructions. Check if the tracks are clear of debris.
• Poor cleaning performance: Clean the filter bin thoroughly. Ensure the pool water chemistry is balanced.
• Cleaner getting stuck: Check for obstacles in the pool. Ensure the pool depth is within the recommended range.
• Battery not holding charge: Ensure the charger is functioning correctly. If issues persist, the battery may need replacement.

For persistent issues not covered here, please contact Seauto customer support.

8. Specifications

9. Warranty and Support

The Seauto Seal SE Robotic Pool Vacuum typically comes with a 12-month warranty from the date of purchase. Please refer to the warranty card included in your product package for specific terms and conditions.

For further assistance, technical support, or warranty claims, please visit the official Seauto Store on Amazon or refer to the comprehensive User Manual PDF:

• Seauto Official Store
• User Manual (PDF)