Redragon K618

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Redragon K618 PRO 3-Mode Wireless RGB Mechanical Keyboard User Manual

Model: K618

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Redragon K618 PRO 3-Mode Wireless RGB Mechanical Keyboard. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Redragon K618 PRO keyboard with RGB lighting

Image: The Redragon K618 PRO keyboard showcasing its full layout and RGB backlighting.

Package Contents

Verify that all items are present in your package:

  • Redragon K618 PRO Mechanical Keyboard
  • USB-C to USB-A Cable
  • User Manual (this document)

Setup

1. Charging the Keyboard

Before initial use, fully charge the keyboard. Connect the supplied USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a USB wall adapter.

Illustration of 1900mAh battery icon

Image: The keyboard with an overlay indicating how to check battery level using FN + Spacebar.

2. Connection Modes

The K618 PRO supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth (BT 3.0/5.0).

Close-up of keyboard showing 2.4G and BT connection indicators

Image: A close-up of the keyboard highlighting the keys for 2.4Ghz and Bluetooth connections.

2.1. Wired Connection

  1. Connect the USB-C cable to the keyboard and your computer.
  2. The keyboard will automatically switch to wired mode.

2.2. 2.4GHz Wireless Connection

  1. Locate the 2.4GHz USB dongle (usually stored in a compartment on the keyboard).
  2. Plug the USB dongle into an available USB port on your computer.
  3. Slide the mode switch on the keyboard to the "2.4G" position.
  4. The keyboard should connect automatically.

2.3. Bluetooth Connection (BT1, BT2, BT3)

  1. Slide the mode switch on the keyboard to the "BT" position.
  2. Press and hold FN + BT1 (or BT2, BT3) for 3-5 seconds until the indicator light flashes rapidly. This indicates pairing mode.
  3. On your device (computer, tablet, smartphone), go to Bluetooth settings and search for "Redragon K618 PRO".
  4. Select the keyboard to pair. The indicator light will stop flashing once connected.
  5. Repeat for BT2 and BT3 to connect up to three different Bluetooth devices.

Operating Instructions

1. Switching Between Connected Devices

To switch between wired, 2.4GHz, and Bluetooth connections, use the mode switch on the keyboard. For Bluetooth devices, press FN + BT1/BT2/BT3 to switch between the paired devices.

2. Operating System Compatibility (Win/Mac)

The K618 PRO supports both Windows and macOS operating systems. Use the dedicated switch on the keyboard to toggle between Windows and Mac modes for optimal key mapping.

Close-up of keyboard showing Mac/Win switch

Image: A close-up view of the keyboard's dedicated switch for Windows and Mac operating system modes.

3. RGB Backlighting Control

The keyboard features customizable RGB backlighting with 16.8 million colors. Use the dedicated keys or the Redragon software for adjustments.

  • FN + Right Arrow: Change backlight color.
  • FN + Up/Down Arrow: Adjust backlight brightness.
  • FN + Left Arrow: Change backlight effect mode.
  • FN + +/-: Adjust backlight effect speed.
Screenshot of Redragon software for RGB customization

Image: A screenshot of the Redragon software interface, demonstrating options for customizing RGB lighting effects and macros.

4. Macro Keys and Media Controls

The keyboard includes dedicated macro keys (G1-G5) and media control functions for enhanced usability.

  • G1-G5 Keys: Programmable macro keys. Refer to the software section for customization.
  • Media Control Knob: Adjust volume (rotate) and mute/unmute (press).
  • Dedicated Media Keys: Play/Pause, Stop, Previous Track, Next Track.
Close-up of keyboard showing media controls and macro keys

Image: A detailed view of the keyboard's upper right section, showing the media control knob and dedicated macro keys.

5. Battery Status Check

To check the current battery level, press FN + Spacebar. The indicator lights will display the battery status.

Maintenance

1. Cleaning

  • Disconnect the keyboard from all power sources before cleaning.
  • Use a soft, damp cloth to wipe the surface of the keyboard.
  • For dust and debris between keys, use compressed air or a small brush.
  • Avoid using harsh chemicals or abrasive materials.

2. Battery Care

  • Avoid exposing the keyboard to extreme temperatures.
  • If storing the keyboard for an extended period, charge it to approximately 50% to preserve battery health.
  • Use only the provided USB cable or a certified equivalent for charging.

Troubleshooting

1. Keyboard Not Responding

  • Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4GHz Wireless: Ensure the USB dongle is plugged in and the keyboard switch is set to "2.4G". Re-pair if necessary by pressing FN + 2.4G until the indicator flashes, then re-insert the dongle.
  • Bluetooth Mode: Ensure the keyboard switch is set to "BT" and you have selected the correct BT channel (BT1, BT2, or BT3). Re-initiate pairing mode if the connection is lost.
  • Battery: Check the battery level (FN + Spacebar) and charge the keyboard if the battery is low.

2. RGB Backlighting Not Working Correctly

  • Ensure the backlight is not turned off (check brightness settings).
  • If using software, ensure it is running and correctly configured.
  • A factory reset (refer to software or advanced settings) might resolve persistent issues.

3. Keys Not Registering or Double-Typing

  • Clean under the keycaps to remove any debris.
  • Ensure the keyboard firmware is up to date (check Redragon's official website).
  • If the issue persists, contact Redragon customer support.

Specifications

ModelK618
ConnectivityUSB-C Wired, 2.4GHz Wireless, Bluetooth (BT 3.0/5.0)
Switch TypeLow-Profile Mechanical (Blue Switch variant)
BacklightingRGB (16.8 Million Colors)
Battery Capacity1900 mAh Lithium Polymer
Dimensions (L x W x H)17.2 x 5.79 x 0.67 inches (43.69 x 14.71 x 1.70 cm)
Weight2.27 pounds (1.03 kg)
Operating System SupportWindows, macOS
Comparison of keyboard thickness, showing K618 as ultra-slim

Image: A visual comparison illustrating the ultra-slim design of the K618 PRO keyboard compared to a standard mechanical keyboard.

Diagram of Redragon low-profile mechanical switches

Image: A diagram detailing the structure and actuation points of Redragon low-profile mechanical switches versus standard switches.

Warranty and Support

For warranty information, technical support, or further assistance, please visit the official Redragon website or contact their customer service department. Keep your purchase receipt for warranty claims.

Official Redragon Website: www.redragonzone.com

© 2023 Redragon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.