1. Introduction
The Anykit Digital Otoscope with Gyroscope is an advanced ear examination and earwax removal tool designed for home use. It features a 4.5-inch HD screen, a 3.9mm camera probe with 6 adjustable LED lights, and an intelligent gyroscope for stable imaging. This device allows users to visually inspect their ear canal, capture photos and videos, and safely remove earwax.
Image: The Anykit Digital Otoscope with its main display unit and camera probe.
2. Safety Information
Please read and understand all safety warnings before using the Anykit Digital Otoscope.
- Warning! DO NOT USE this product if you have any existing ear, mouth, nose problems or diseases. Consult a medical professional if you experience pain, discomfort, or have a pre-existing condition.
- Warning! THIS IS NOT A TOY. Keep the product away from children under 12 years old. Adult supervision is required for use by minors.
- Always use the provided earcap (specula) when inserting the camera probe into the ear canal to ensure safety and prevent over-insertion.
- Clean the camera lens and ear picks thoroughly before and after each use to prevent cross-contamination.
- Do not force the camera probe into the ear canal. If you encounter resistance, stop immediately.
- Avoid using the device excessively. If you experience soreness or irritation, discontinue use.
Image: Illustration demonstrating safe and unsafe insertion of an ear cleaning tool.
3. Package Contents
Verify that all items are present in your package:
- 4.5-inch Monitor Display Unit
- 3.9mm Camera Probe
- Detachable Bracket
- User Manual
- 3x Specula (Ear Caps)
- 4x Ear Spoons (Ear Picks)
- 2x Protective Covers
- USB Charging Cable (charger NOT included)
- 32GB MicroSD Card (pre-installed or included separately)
Image: All components included in the Anykit Digital Otoscope package.
4. Setup
- Charge the Device: Connect the USB charging cable to the device's charging port and a USB power adapter (not included). The device has a 2500mAh rechargeable battery, providing up to 4 hours of continuous use on a single charge.
- Insert MicroSD Card: Ensure the 32GB MicroSD card is properly inserted into the TF card slot. This card is essential for saving photos and videos.
- Attach Camera Probe: Carefully connect the 3.9mm camera probe to the designated port on the display unit.
- Attach Detachable Bracket: If desired, attach the detachable bracket to the back of the display unit for hands-free viewing.
Image: The detachable screen holder attached to the back of the otoscope display unit.
5. Operating Instructions
5.1 Power On/Off
- Press and hold the Power button (⏻) to turn the device on or off.
5.2 Basic Operation
- Screen Display: The 4.5-inch HD screen provides a live view from the camera probe.
- Navigation Buttons: Use the ▲ (Up) and ▼ (Down) buttons to navigate menus or adjust settings.
- OK Button: Press the OK button to confirm selections.
- Mode Button: Press the M button to switch between photo and video modes.
- Light Control: Use the light control button (☀) to adjust the brightness of the 6 LED lights on the camera probe (3-level brightness).
- Snap Button: Press the camera icon button (📷) to take a photo or start/stop video recording.
Image: Close-up of the otoscope's display and control buttons.
5.3 Ear Examination and Wax Removal
- Attach Specula: Always attach a clean specula (ear cap) to the camera probe before insertion.
- Gentle Insertion: Carefully and slowly insert the camera probe into the ear canal while observing the live feed on the screen. Do not force it.
- Utilize Gyroscope: The intelligent directional gyroscope ensures a stable image and clear view, even with slight movements.
- Adjust Lighting: Adjust the LED light brightness for optimal visibility of the ear canal and eardrum.
- Capture Media: Press the Snap button to take photos or record videos of your ear canal. These are saved to the 32GB MicroSD card.
- Earwax Removal: If using the ear spoons, attach them securely to the probe. Use extreme caution and gentle movements to remove visible earwax. It is recommended to have someone assist you for safer removal.
- Remote Consultation: You can easily transfer captured images and videos from the MicroSD card to your computer or phone to share with a medical professional for remote consultation.
Image: The otoscope provides a stable and smooth image thanks to its 6-Axis gimbal gyroscope.
Image: Illustration of safe earwax removal using the soft silicone earpick and adjustable protective cover.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Anykit Digital Otoscope.
- Cleaning the Camera Lens: Earwax and grease can accumulate on the camera lens, causing blurry images. Use alcohol wipes or Q-tips to gently clean the lens before each use.
- Cleaning Accessories: Wash the reusable specula and ear spoons with soap and water, then disinfect with alcohol before and after each use.
- Storage: Store the device and its accessories in a clean, dry place away from direct sunlight and extreme temperatures.
Video: Instructions on how to clean the otoscope camera lens to prevent blurry images. This video demonstrates using alcohol wipes and Q-tips for effective cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Image is blurry or unclear. | Earwax, grease, or dirt on the camera lens. | Clean the camera lens thoroughly with an alcohol wipe or Q-tip before each use. Refer to the Maintenance section. |
| Device does not power on. | Low battery or device malfunction. | Ensure the device is fully charged. If the issue persists, contact customer support. |
| Cannot save photos/videos. | MicroSD card is full, not inserted correctly, or corrupted. | Check if the MicroSD card is properly inserted. Delete old files to free up space or try a different compatible MicroSD card. |
| Image is unstable or difficult to orient. | Rapid movement or incorrect handling. | The device has an intelligent gyroscope for stability. Try to move the probe slowly and steadily. Practice gentle movements. |
8. Specifications
- Model Number: AKS450
- Screen Size: 4.5 inches
- Camera Probe Diameter: 3.9mm
- LED Lights: 6 adjustable LED Lights (3-level brightness)
- Storage: 32GB MicroSD Card (included)
- Battery: 2500mAh Lithium Ion (included)
- Battery Life: Up to 4 hours continuous use
- Product Dimensions: 5.91 x 2.36 x 1.18 inches
- Item Weight: 12.3 ounces
- Manufacturer: Anykit
- First Available Date: July 1, 2023
Image: Visual representation of the 4.5-inch HD display with 854x480 resolution.
Image: Detailed view of the 3.9mm camera probe with its 6 LED lights for ultra-clear viewing.
9. Warranty & Support
For warranty information, technical support, or any inquiries regarding your Anykit Digital Otoscope, please refer to the official user manual included in your package or visit the Anykit official website.
You can also find additional safety information and resources via the provided PDF document: Safety Information (PDF).
For further assistance, please contact Anykit customer service.
