Introduction
The BRASQ Flipover Paper is designed for clear notes and impactful presentations. It offers a reliable solution for meetings, training sessions, or classroom lessons, providing a tangible alternative to digital tools.
Each block contains 50 sheets of high-quality, 80 g/m² paper, ensuring markers do not bleed through. The sheets are double-sided, featuring one blank side and one side with a 25 mm grid, allowing flexibility for various presentation styles. Universal boreholes and micro-perforation facilitate easy attachment to most flipcharts and clean tearing of used sheets.
This product is PEFC-certified, indicating it originates from sustainably managed forests.
Setup
To set up your BRASQ Flipover Paper, follow these steps:
- Unpack the Flipover Block: Carefully remove the flipover paper block from its packaging.
- Identify Boreholes: Locate the two universal boreholes at the top of each sheet. These holes are designed to fit most standard flipchart stands.
- Attach to Flipchart: Align the boreholes with the pegs or clamps on your flipchart stand. Gently slide the paper onto the stand, ensuring it is securely fastened.
- Choose Your Side: Decide whether to use the blank side for free-form notes or the grid side for structured diagrams and writing.
Image: BRASQ Flipover Paper securely attached to a flipchart stand, displaying its grid pattern. The boreholes at the top are visible, indicating how the paper is mounted.
Image: A detailed view of the top section of the BRASQ Flipover Paper, highlighting the universal boreholes and the micro-perforation line for easy and clean tearing.
Operating Instructions
Using your BRASQ Flipover Paper is straightforward:
- Writing and Drawing: Use appropriate markers or pens for flipover paper. The 80 g/m² paper quality is designed to prevent bleed-through, even with strong markers.
- Utilizing Dual Sides:
- Blank Side: Ideal for free-form brainstorming, large drawings, or when a clean, uncluttered look is desired.
- Grid Side (25 mm): Perfect for structured notes, diagrams, graphs, or maintaining neat handwriting during presentations.
- Tearing Off Sheets: Once a sheet is filled or no longer needed, gently tear it off along the micro-perforation line located just below the boreholes. This ensures a clean and neat separation without damaging the remaining sheets.
Image: The BRASQ Flipover Paper displaying its 25mm grid pattern and overall dimensions of 65 cm width and 98 cm height, suitable for various presentation needs.
Image: BRASQ Flipover Paper positioned on a stand within a meeting room, demonstrating its practical application for presentations or collaborative sessions.
Maintenance
To ensure the longevity and quality of your BRASQ Flipover Paper:
- Storage: Store unused flipover blocks in a dry, cool place, away from direct sunlight and excessive humidity. This prevents paper discoloration, warping, or damage.
- Handling: Handle the paper by the edges to avoid smudges or creases on the writing surface.
- Marker Compatibility: While the paper is designed to prevent bleed-through, always use markers specifically intended for flipcharts or whiteboards to ensure optimal results and prevent damage to the paper or underlying surfaces.
Troubleshooting
Here are solutions to common issues you might encounter:
- Marker Bleed-Through:
The BRASQ Flipover Paper is made from high-quality 80 g/m² paper to minimize bleed-through. If you experience excessive bleed-through, ensure you are using markers specifically designed for flipcharts or whiteboards. Avoid using permanent markers or those with very high ink saturation that are not intended for paper.
- Sheets Not Tearing Cleanly:
The paper features micro-perforation for clean tearing. Ensure you are tearing along the perforated line. Apply even pressure and tear downwards or across, rather than pulling at an angle. If the perforation is damaged, use a straight edge or ruler to assist in tearing.
- Paper Not Fitting Flipchart:
The BRASQ Flipover Paper has universal boreholes designed to fit most flipcharts. If it does not fit, double-check that the flipchart pegs are correctly aligned and that the paper is not obstructed. If your flipchart has an unusual design, consider using clamps or clips to secure the paper.
Specifications
| Format | 65 x 98 cm |
| Weight per Sheet | 80 g/m² |
| Number of Sheets | 50 per block |
| Material | Chlorine-free bleached, wood-free writing paper |
| Lining | One side blank, one side grid (25 mm) |
| Attachment | 2 universal boreholes, suitable for most flipcharts |
| Manufacturer Part Number | 8672601 |
| Product Dimensions | 98L x 65W x 0.1D cm |
| Certification | PEFC-certified (from sustainably managed forests) |
Warranty Information
BRASQ products are manufactured to high-quality standards. While specific warranty details for consumable items like flipover paper are not typically provided, this product is guaranteed to be free from manufacturing defects upon purchase. If you encounter any issues related to the quality or condition of the paper upon receipt, please refer to the retailer's return policy.
Support
For further assistance or inquiries regarding your BRASQ Flipover Paper, please contact your point of purchase or visit the official BRASQ website for customer support information.
Manufacturer: BRASQ
