BRASQ Shelving Unit Assembly Instructions
Product Overview
This document provides instructions for assembling the BRASQ shelving unit. Please follow each step carefully to ensure proper and safe assembly.
Load Capacities
Each shelf has a maximum load capacity of 175 KG.
The total maximum load capacity for the unit is 875 KG.
Tools Required
- Gloves ?
- Hammer ?
- Screwdriver ?
Assembly Steps
Step 1: Prepare the Frame
Place two vertical frames upright. Ensure they are parallel and spaced appropriately for the shelves.
Diagram shows two vertical frames with shelves already attached.
Step 2: Attach Shelves
Insert the shelves into the designated slots on the vertical frames. Ensure each shelf is securely seated.
Diagram shows multiple shelves being attached to the vertical frames, creating a multi-tiered unit.
Step 3: Secure Crossbars
Attach the crossbars to the top and bottom of the unit for added stability. Arrows indicate connection points labeled 'A'.
Diagram shows crossbars being attached to the top of the shelving unit, with a magnified view showing the connection detail. An arrow indicates a 180° rotation for a component.
Step 4: Add Top and Bottom Supports
Connect the top and bottom support beams to the assembled frame. Arrows indicate the connection points.
Diagram shows additional support beams being attached to the top of the unit.
Step 5: Final Assembly
Ensure all components are securely fastened. The unit is now ready for use. Arrow labeled 'B' indicates a connection point.
Diagram shows the completed shelving unit with all shelves in place.
Parts List (Example Quantities)
- 10x Long beams
- 10x Medium beams
- 5x Short beams
- 4x Corner brackets
- 8x Fasteners
- 5x Shelves
BRASQ®
