Introduction
Thank you for purchasing the HOLMES 16" Digital Stand Fan. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and retain it for future reference.
This fan is designed to provide efficient and customizable cooling for various indoor environments such as bedrooms, living rooms, kitchens, and home offices. It features digital controls, multiple speed and mode settings, oscillation, and adjustable height and tilt for optimal airflow direction.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Do not operate any fan with a damaged cord or plug.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Always unplug the fan before cleaning or servicing.
- Do not immerse fan in water or other liquids.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Do not insert fingers or foreign objects into any opening on the fan.
- Ensure the fan is placed on a stable, level surface during operation.
Package Contents
- HOLMES 16" Digital Stand Fan Unit
- Remote Control
- Instruction Manual
Setup and Assembly
Assembly of the HOLMES 16" Digital Stand Fan is required before first use. Please follow these steps carefully.
Figure 1: HOLMES 16" Digital Stand Fan and Remote Control.
This image displays the complete HOLMES 16" Digital Stand Fan assembly, including the fan head, adjustable stand, cross-shaped base, and the accompanying remote control. The fan is black with a silver stand pole.
- Base Assembly: Attach the fan pole to the cross-shaped base. Ensure all screws are tightened securely to provide a stable foundation for the fan.
- Fan Head Attachment: Secure the fan head assembly to the top of the fan pole. Align the components and fasten them according to the instructions provided in the detailed PDF manual (link in Support section).
- Grille and Blade Installation: Carefully install the fan blades onto the motor shaft, followed by securing the front and rear grilles. Ensure the grilles are properly latched to prevent accidental contact with the blades.
- Power Connection: Plug the fan into a standard 120V AC electrical outlet.
For detailed visual instructions on assembly, please refer to the official Instructions for Use (IFU) PDF linked in the Support section.
Operating Instructions
Your HOLMES Digital Stand Fan offers various settings for personalized comfort. The fan can be operated using the control panel on the fan unit or the included remote control.
Figure 2: Remote Control Layout.
This image shows the remote control for the fan, featuring buttons for Power, Speed, Timer, Oscillation (OSC), Mode, and Mute. The remote is black with white icons.
Control Panel and Remote Functions:
- Power Button (ⓘ): Press to turn the fan ON or OFF.
- Speed Button (⚡): Press to cycle through 3 speed settings: Low (L), Medium (M), High (H). The current speed setting is indicated by LED lights on the fan's control panel.
- Mode Button (≡): Press to select from 3 operating modes:
- Normal: Constant airflow at selected speed.
- Breeze: Simulates natural wind by varying fan speed.
- Sleep: Gradually decreases fan speed over time for quiet operation during sleep.
- Oscillation (OSC) Button (↻): Activates or deactivates the 80° wide-angle oscillation feature, distributing airflow across a wider area.
- Timer Button (⏱): Sets the auto shut-off timer for up to 7.5 hours. Press repeatedly to cycle through available timer intervals (e.g., 0.5H, 1H, 2H, 4H).
- Mute Button (🔇): Mutes the fan's operational beeps or sounds.
Adjusting Fan Position:
- Adjustable Height: The fan's height can be adjusted from 37 inches to 44 inches. Loosen the height adjustment knob on the stand, extend or retract the pole to the desired height, and then securely tighten the knob.
Figure 3: Adjustable Height Feature.
This diagram illustrates the adjustable height range of the fan, showing it can extend from 37 inches to 44 inches, along with its base dimensions of 17 inches width and 24.6 inches depth.
- Adjustable Head Tilt: The fan head can be tilted up to 30° to direct airflow precisely where needed. Gently tilt the fan head to the desired angle.
Figure 4: Adjustable Head Tilt Feature.
This diagram visually represents the 30-degree adjustable head tilt capability of the fan, showing how the fan head can pivot upwards and downwards to direct airflow.
Maintenance and Care
Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your HOLMES Digital Stand Fan.
- Cleaning: Always unplug the fan from the power outlet before cleaning. Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents. For thorough cleaning of the blades and grilles, the fan can be disassembled (refer to assembly instructions in the PDF manual for reverse steps). Ensure all parts are completely dry before reassembling and plugging in the fan.
- Storage: When not in use for extended periods, store the fan in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
- Motor: The fan motor is permanently lubricated and requires no additional lubrication.
Troubleshooting
If your fan is not operating as expected, please consult the following common issues and solutions before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | Not plugged in; Power outlet not active; Remote control batteries dead; Fan not assembled correctly. | Ensure the fan is securely plugged into a working electrical outlet. Check the circuit breaker. Replace remote control batteries. Verify all assembly steps were followed correctly. |
| Weak airflow. | Fan speed set too low; Obstruction in front/back of fan; Dirty grilles/blades. | Increase fan speed setting. Ensure there are no objects blocking the airflow. Clean the fan grilles and blades as per maintenance instructions. |
| Fan is noisy. | Loose parts; Fan not on a level surface; Obstruction. | Check for any loose screws or components and tighten them. Place the fan on a firm, level surface. Remove any objects that may be interfering with the fan blades or grilles. Note: The fan operates at 58 dB on the strongest setting, equivalent to normal conversation. |
| Oscillation not working. | Oscillation feature not activated. | Press the OSC button on the control panel or remote control to activate oscillation. |
Specifications
| Feature | Detail |
|---|---|
| Brand | HOLMES |
| Model Name | HOLMES Digital Stand Fan |
| Model Number | 32510140 |
| Fan Type | Pedestal Fan / Floor Fan |
| Color | Black |
| Blade Length | 16 Inches |
| Power Source | Corded Electric |
| Voltage | 120.0 V |
| Wattage | 45 W |
| Air Flow Capacity | 1,700 Cubic Feet Per Minute (CFM) |
| High-Speed Velocity | 16.4 ft/sec |
| Noise Level | 58 dB (on strongest speed setting) |
| Number of Speed Levels | 3 |
| Operating Modes | Normal, Breeze, Sleep |
| Oscillation | 80° Wide Angle Motorized Oscillation |
| Timer | Up to 7.5 Hour Auto Shut-Off |
| Adjustable Height | 37" to 44" |
| Adjustable Head Tilt | Up to 30° |
| Product Dimensions (DxWxH) | 24.6"D x 17"W x 44"H (max height) |
| Item Weight | 5.32 pounds |
| Included Components | 16" Holmes Stand Fan, Remote |
| Certifications | ETL, FCC |
Figure 5: ETL Certified.
This image displays the ETL Listed mark, indicating that the product has been tested and meets applicable safety standards.
Warranty and Support
Your HOLMES 16" Digital Stand Fan is backed by a Limited 3-Year Warranty. This warranty covers defects in material or workmanship under normal use and care. Please retain your proof of purchase for warranty claims.
For detailed warranty information, product registration, or further assistance, please visit the official HOLMES website or refer to the full Instructions for Use (IFU) PDF document.
Official Instructions for Use (IFU) PDF: Download PDF Manual
For customer service inquiries, please refer to the contact information provided in your product packaging or on the official HOLMES brand website.
