1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your BANTI 67-inch L-Shaped Desk, Model B-DS-L-YH170-B. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1.1: Fully assembled BANTI 67-inch L-Shaped Desk.
2. Safety Information
- Read all instructions before assembly.
- Ensure all parts are present and undamaged before starting assembly.
- Assemble the desk on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging components.
- Keep small parts away from children.
- Do not exceed the weight capacity of the desk or its components, especially the storage drawer (maximum 3.3 lbs).
- Periodically check all connections to ensure they remain tight.
3. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact BANTI customer support.
3.1. Main Components
- L-Shaped Desktop Panels (Engineered Wood)
- Desk Frame (Alloy Steel Pipes)
- Monitor Stand
- Storage Drawer (Non-woven fabric)
3.2. Hardware and Tools
- Assembly Screws and Fasteners
- Allen Wrench (Hex Key)
- Instruction Manual (this document)
4. Assembly Instructions
Assembly is required for this product. It is recommended to have two people for easier and safer assembly. Follow the steps below carefully.
4.1. Preparation
- Unpack all components and lay them out on a soft, clean surface.
- Identify all parts by comparing them with the parts list in the included assembly guide.
- Ensure you have the necessary tools (usually an Allen wrench is provided).
4.2. Frame Assembly
- Attach the main support beams to the desk legs using the provided screws. Do not fully tighten yet.
- Connect the L-shaped frame sections, ensuring proper alignment.
- Once all frame components are loosely connected, gently tighten all screws.
Figure 4.1: Detail of the high-quality iron pipe construction for stability.
4.3. Desktop Panel Installation
- Carefully place the desktop panels onto the assembled frame.
- Align the pre-drilled holes in the desktop with the holes in the frame.
- Secure the desktop panels to the frame using the appropriate screws.
4.4. Monitor Stand and Drawer Installation
- Attach the monitor stand to the designated area on the desktop. The monitor stand can be positioned on either the left or right side of the L-shape.
- Insert the non-woven storage drawer into its designated slot under the desktop.
Figure 4.2: The monitor stand provides additional storage space.
Figure 4.3: The non-woven storage drawer for light items. Do not exceed 3.3 lbs capacity.
4.5. Reversible Configuration
The L-shaped design of this desk allows for a reversible configuration, meaning the longer section can be set up on either the left or right side to suit your space requirements.
Figure 4.4: The desk can be installed with the L-shape on either the left or right side.
5. Usage
The BANTI 67-inch L-Shaped Desk is designed for various applications, including home office, study, gaming, and general workstation use. Its spacious surface accommodates multiple monitors, laptops, and other office essentials.
5.1. Work Area
The generous dimensions provide ample space for your computer setup, writing tasks, and other activities. The L-shape maximizes corner space efficiency.
5.2. Monitor Stand
Utilize the integrated monitor stand to elevate your display to an ergonomic height, reducing neck strain. The space underneath can be used for storing small items or a keyboard when not in use.
5.3. Storage Drawer
The non-woven drawer is suitable for organizing light office supplies, documents, or personal items. Ensure the weight placed in the drawer does not exceed 3.3 lbs.
6. Maintenance
Proper care will extend the life and appearance of your BANTI L-Shaped Desk.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood surface.
- Inspection: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary to maintain stability.
- Weight Distribution: Distribute weight evenly across the desktop to prevent stress on any single point.
7. Troubleshooting
7.1. Desk Wobbles After Assembly
- Ensure all screws are fully tightened.
- Verify that the desk is placed on a level surface. Adjust floor glides if present.
- Check that all frame components are correctly aligned according to the assembly instructions.
7.2. Missing or Damaged Parts
- Carefully re-check the packaging for any overlooked small parts.
- If parts are genuinely missing or damaged, contact BANTI customer support with your purchase details and a description of the issue.
8. Specifications
Figure 8.1: Key dimensions of the BANTI 67-inch L-Shaped Desk.
| Feature | Detail |
|---|---|
| Model Number | B-DS-L-YH170-B |
| Overall Dimensions (D x W x H) | 19.7"D x 69"W x 30"H |
| Main Desktop Width | 67 inches |
| Side Desktop Length | 47.3 inches |
| Desktop Material | Engineered Wood |
| Frame Material | Alloy Steel |
| Color | Black |
| Item Weight | 53 Pounds |
| Storage Drawer Capacity | Max 3.3 lbs |
| Assembly Required | Yes |
9. Warranty and Support
BANTI is committed to providing quality products. For any questions regarding assembly, missing parts, or product issues, please contact BANTI customer support. Please have your purchase information and model number (B-DS-L-YH170-B) ready when contacting support.
For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official BANTI website.
