Merax Twin Size Velvet House Bed Instruction Manual

Introduction

Thank you for choosing the Merax Twin Size Velvet House Bed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Information:

• Always follow assembly instructions carefully.
• Do not exceed the maximum weight recommendation of 400 pounds.
• Keep the area around the bed clear of obstacles to prevent tripping or entrapment.
• Never leave young children unattended in or around the bed.
• Ensure all connections are securely tightened before use and check periodically.

Package Contents

Before assembly, verify that all components are present. Refer to the included hardware list and diagrams in your physical instruction booklet.

Image: Overview of bed frame components. Ensure all parts are accounted for before proceeding.

Setup and Assembly

Assembly requires two adults. Clear a spacious area for assembly. Tools are typically included, but a Phillips head screwdriver may be helpful.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Assemble Side Rails: Attach the side rails to the headboard and footboard using the provided hardware. Do not fully tighten screws until all major components are aligned.
3. Install House Frame: Secure the roof-shaped frame components to the top of the bed posts. Ensure they are properly aligned and stable.
4. Insert Slats: Place the wooden slats across the bed frame. Secure them to the side rails using the designated fasteners. The slats provide mattress support and eliminate the need for a box spring.
5. Final Tightening: Once all components are in place and aligned, fully tighten all screws and bolts. Do not overtighten.
6. Inspect: Verify that the bed frame is stable and all connections are secure before placing a mattress on it.

Image: The assembled bed frame, showcasing the house-shaped structure and slat support system.

Operating Instructions

The Merax Twin Size Velvet House Bed is designed for sleeping and as a semi-enclosed play space. Place a standard twin-size mattress directly onto the wooden slats. No box spring is required.

• Ensure the mattress fits snugly within the frame to prevent gaps.
• The house frame can be decorated with lightweight fabrics or lights, but avoid hanging heavy objects or anything that could pose a strangulation hazard.
• Regularly check the stability of the bed, especially if used by active children.

Image: The Merax House Bed in a decorated room, demonstrating its use as both a sleeping area and a creative space.

Maintenance and Care

Proper care will extend the life and appearance of your Merax bed frame.

• Velvet Upholstery: The velvet upholstered sections require dry cleaning only. For minor spills, gently blot with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Wood Frame: Wipe the pinewood frame with a soft, damp cloth. Avoid excessive moisture.
• Hardware: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability.
• Cleaning: Dust the bed frame regularly with a soft cloth.

Image: Detail of the velvet upholstered panel, highlighting the material that requires dry cleaning.

Troubleshooting

If you encounter any issues with your Merax Twin Size Velvet House Bed, refer to the following common solutions:

Specifications

Image: Dimensional drawing of the bed frame, showing length, width, and height measurements.

Warranty and Support

Merax provides customer support for its products. For any issues, missing parts, or warranty inquiries, please contact us directly.

• Website: Merax.com
• Email: csr@merax.com

Please have your model number (PH0170) and proof of purchase ready when contacting support.