1. Important Safety Information
Please read this manual carefully before operating the device. Failure to follow these instructions may result in injury or damage to the product.
- Electrical Safety: Ensure the power supply voltage matches the device's requirements. Always disconnect power before cleaning or servicing.
- Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
- Placement: Install the light in a stable location, away from flammable materials, excessive heat, moisture, or dust.
- Mounting: When mounting overhead, always use a safety cable. Ensure the mounting structure can support the weight of the fixture.
- Eye Safety: Avoid direct eye exposure to the light source.
- Servicing: Refer all servicing to qualified personnel.
2. Package Contents
Verify that all items are present and in good condition upon opening the package:
- 2 x Mini Bee Eyes Stage Lights
- 2 x Power cables
- 2 x DMX cables
- 1 x User manual
- 2 x Bow mounts + 4 Screws
Image: Two DJXFLI Moving Head Lights shown with their included accessories, including power cables, DMX cables, mounting brackets, and user manual.
3. Product Overview
The DJXFLI 6x15W Mini Bee Eye Moving Head Light is a versatile stage lighting fixture designed for various events. It features RGBW 4-in-1 LED lamp beads, offering a wide spectrum of colors and dynamic effects.
Key Features:
- RGBW Bee Eye Effect: 6 x 15W 4-in-1 RGBW LEDs for rich color mixing and infinite rotating bee eye effects.
- Dynamic Movement: Pan 540° and Tilt 270° for wide coverage and flexible positioning.
- Multiple Control Modes: Supports DMX512, Automatic, Sound Activated, and Master/Slave modes.
- Efficient Cooling: Integrated cooling system to prevent overheating and ensure longevity.
- Strobe Effect: Adjustable strobe speed from 1 to 25 times per second.
Image: A diagram illustrating the dimensions of the moving head light (approximately 10.43 inches tall and 8.66 inches wide) and highlighting key features such as cooling fan, sound control, LED light, high lighting, rich color, and DMX512 console compatibility.
Image: A visual representation of the light's movement capabilities, indicating a Pan range of 540 degrees and a Tilt range of 270 degrees. The light is shown in various positions to demonstrate its flexibility.
4. Setup and Installation
Mounting:
The light can be placed on a flat surface or mounted to a truss or wall using the included bow mount and screws. Ensure the mounting surface is secure and capable of supporting the fixture's weight.
- Attach the bow mount to the bottom of the light using the provided screws.
- Securely fasten the light to your desired location (truss, wall, or ceiling) using appropriate clamps or hardware (not included, unless specified).
- Always use a safety cable when mounting overhead to prevent accidental falls.
Connections:
- Power Connection: Connect the provided power cable to the "POWER IN" port on the back of the unit and then to a suitable power outlet (AC110-240V, 50/60Hz).
- DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port of the first light. For multiple lights, daisy-chain them by connecting the "DMX OUT" of the first light to the "DMX IN" of the next, and so on.
5. Operating Modes
The DJXFLI Moving Head Light offers four primary control modes, selectable via the onboard LED display and buttons.
Control Panel:
The control panel on the front of the unit features an LED display and four buttons: MENU, UP, DOWN, and ENTER. Use these buttons to navigate through settings and select operating modes.
Image: A comprehensive view of the light's control interface, showing the LED display, MENU, UP, DOWN, and ENTER buttons, and the DMX IN/OUT and Power ports. This image also highlights the internal cooling fan.
Mode Selection:
- DMX512 Mode: Allows professional control over all functions (color, movement, strobe, etc.) using a DMX controller. Set the DMX address via the menu. (Refer to the DMX Channel Map section for details).
- Automatic Mode: The light runs through pre-programmed sequences and patterns automatically.
- Sound Control Mode: The light reacts to ambient sound and music, changing patterns and intensity in sync with the beat.
- Master/Slave Mode: Connect multiple lights via DMX cables. Set one unit as "Master" and others as "Slave." Slave units will mimic the Master's behavior, creating synchronized effects.
The device retains the last selected operation mode, eliminating the need for frequent resetting.
6. DMX Channel Map
This fixture utilizes 15 DMX channels for comprehensive control. For detailed channel assignments and their corresponding functions, please refer to the specific DMX channel table provided in the physical user manual included with your product. A typical DMX channel map for a moving head light includes control over:
| Channel | Function | Value Range (0-255) |
|---|---|---|
| 1 | Pan Movement | 0-255 (0° to 540°) |
| 2 | Pan Fine | 0-255 |
| 3 | Tilt Movement | 0-255 (0° to 270°) |
| 4 | Tilt Fine | 0-255 |
| 5 | Pan/Tilt Speed | 0-255 (Fast to Slow) |
| 6 | Red Intensity | 0-255 (0% to 100%) |
| 7 | Green Intensity | 0-255 (0% to 100%) |
| 8 | Blue Intensity | 0-255 (0% to 100%) |
| 9 | White Intensity | 0-255 (0% to 100%) |
| 10 | Dimmer | 0-255 (0% to 100%) |
| 11 | Strobe | 0-255 (Off to Fast) |
| 12 | Color Macro | 0-255 (Pre-set colors) |
| 13 | Program Selection | 0-255 (Auto programs) |
| 14 | Sound Active Sensitivity | 0-255 |
| 15 | Reset / Special Functions | 0-255 |
Note: This is a generic DMX channel map. The exact functions and values may vary. Always refer to the specific DMX channel table in your product's included manual for precise control.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your moving head light.
- Cleaning: Periodically clean the lens and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Fan and Vents: Ensure the cooling fan and ventilation openings are free from dust and debris. Use compressed air to clear any blockages.
- Inspection: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear, damage, or loose connections.
- Storage: When not in use for extended periods, store the light in a dry, dust-free environment.
8. Troubleshooting
If you encounter issues with your moving head light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable disconnected; no power from outlet; internal fuse blown. | Check power cable connection. Test outlet with another device. If fuse is accessible and replaceable, replace it (refer to manual). |
| No Light Output | Dimmer channel at 0; light in standby mode; LED failure. | Check DMX dimmer channel. Ensure light is not in a paused or standby mode. Contact support if LEDs appear faulty. |
| No Movement (Pan/Tilt) | Movement channels at 0; motor issue; DMX signal problem. | Check DMX pan/tilt channels. Try resetting the unit. Ensure DMX cable is properly connected. |
| DMX Control Issues | Incorrect DMX address; faulty DMX cable; DMX termination missing; controller issue. | Verify DMX address matches controller. Test with a different DMX cable. Add a DMX terminator to the last fixture in the chain. Test with another DMX controller. |
| Overheating | Blocked ventilation; prolonged use in high ambient temperature. | Ensure vents are clear. Allow unit to cool down. Operate in a well-ventilated area. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 6x15W Bee Eye 2 Pack |
| Light Source | 6 x 15W RGBW 4-in-1 LED Lamp Beads |
| Power Consumption | 90 Watts (Max 150W) |
| Input Voltage | AC110-240V, 50/60Hz |
| Pan Movement | 540° |
| Tilt Movement | 270° |
| Beam Angle | 4° |
| Control Modes | DMX512, Automatic, Sound Control, Master/Slave |
| DMX Channels | 15 Channels |
| Strobe Effect | 1-25 times/second (random strobe) |
| Material | Plastic |
| Product Dimensions | 10.43"L x 8.66"W x 8.66"H |
| Item Weight | 20.3 pounds (for 2-pack) |
10. Warranty and Support
DJXFLI is committed to providing high-quality products and customer satisfaction. If you have any questions, concerns, or require technical assistance regarding your Moving Head Light, please do not hesitate to contact our customer support team.
You can reach us through the after-sales email provided with your purchase or on the official DJXFLI website. We aim to respond to all inquiries within 24 hours.
Please retain your proof of purchase for any warranty claims.
