VADANIA VK2053 40-Inch Soft Close Heavy Duty Drawer Slides Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VADANIA VK2053 40-inch Soft Close Heavy Duty Drawer Slides. Designed for durability and smooth functionality, these slides are suitable for various heavy-duty applications. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1: VADANIA VK2053 40-inch Soft Close Heavy Duty Drawer Slides, showing the two main components of the slide mechanism.

2. Key Features

• Professional & Reliable: Constructed from top-quality steel with 2.0mm thickness and 53mm width for enhanced functionality and durability.
• Soft Close & Heavy Duty: Features a hydraulic buffer for gentle and silent drawer closing, preventing slamming.
• High Load Capacity: Supports up to 265lb (120kg), suitable for demanding applications. Note that longer slides may have slightly reduced load capacity.
• 3-Fold Full Extension: Allows the drawer to extend completely, providing full access to its contents.
• Ball Bearing Mechanism: Double rows of solid steel ball bearings ensure smooth and consistent sliding.
• Detachable Side Mount Installation: The third (thinnest) fold of the slide is detachable for convenient side mounting. M4 screws are recommended but not included.

Image 2: Detailed view of the VK2053 slide's construction, highlighting its 2.0mm steel thickness, 53mm width, and 265lb load capacity.

Image 3: Example of VADANIA VK2053 drawer slides supporting heavy storage containers on industrial shelving, demonstrating their robust load capacity.

3. Specifications

Image 4: Technical drawing illustrating the dimensions and extension capabilities of the VK2053 drawer slide.

4. Safety Information

• Always wear appropriate safety gear, including eye protection, during installation.
• Ensure the mounting surface is stable and capable of supporting the maximum load capacity of the slides.
• Use appropriate fasteners (M4 screws recommended, not included) for secure installation.
• Do not exceed the stated load capacity of 265 pounds (120 kg) to prevent damage or injury.
• Keep hands and fingers clear of moving parts during operation to avoid pinching.
• Ensure proper alignment during installation to prevent binding or uneven operation.

5. Setup and Installation

The VADANIA VK2053 drawer slides are designed for side-mount installation. The third (thinnest) section of the slide is detachable to facilitate easier installation.

5.1 Components Overview

Each pair of drawer slides consists of three sections: the outer fixed track, the middle track, and the inner detachable track (which attaches to the drawer itself).

Image 5: Illustration of the detachable inner slide mechanism. Press the black handle when the slide is fully extended to separate the inner track.

5.2 Detaching the Inner Slide

1. Extend the drawer slide completely until the inner track is fully exposed.
2. Locate the black plastic release lever (handle) on the side of the middle track.
3. Press and hold the release lever.
4. While holding the lever, pull the inner track forward to separate it from the rest of the slide.

5.3 Mounting the Slides

1. Mount the Outer/Middle Tracks to the Cabinet: Secure the outer and middle sections of the slides to the inside of your cabinet or frame. Ensure they are level and parallel to each other. Use M4 screws (not included) through the designated mounting holes.
2. Mount the Inner Tracks to the Drawer: Attach the detached inner tracks to the sides of your drawer box. Ensure they are flush with the bottom edge of the drawer and parallel.
3. Reassemble the Drawer: Align the inner tracks on the drawer with the middle tracks in the cabinet. Gently push the drawer into the cabinet until the tracks engage and lock into place. You should hear a click.
4. Test Operation: Slowly open and close the drawer to ensure smooth movement and proper soft-close functionality.

For visual guidance on the product's features and operation, please refer to the official product video below.

6. Operation

6.1 Full Extension

The VK2053 slides offer 3-fold full extension, meaning the drawer will extend completely out of the cabinet, allowing full access to the contents. Simply pull the drawer outwards until it reaches its full extension stop.

6.2 Soft Close Function

To engage the soft close mechanism, gently push the drawer towards the cabinet when it is partially open. The hydraulic buffer will take over, slowly and silently pulling the drawer to a fully closed position. Avoid forcing the drawer shut, as this can bypass or damage the soft-close mechanism.

Image 6: A drawer equipped with VADANIA soft-close slides, shown in a van setup, demonstrating the smooth closing action.

7. Maintenance

• Cleaning: Wipe the slides periodically with a clean, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Lubrication: If the slides begin to feel stiff or noisy, apply a small amount of silicone-based lubricant to the ball bearings and tracks. Do not use oil-based lubricants as they can attract dirt.
• Inspection: Regularly check all mounting screws to ensure they are tight. Inspect the slides for any signs of wear or damage.

Image 7: Close-up view of the double-row ball bearing system, illustrating the components that ensure smooth operation.

8. Troubleshooting

9. Warranty and Support

VADANIA is committed to providing high-quality hardware accessories. For any pre-sale inquiries (e.g., 3D models, product manuals) or after-sale support (e.g., installation tutorials, troubleshooting), please contact VADANIA customer service. Refer to the product packaging or the official VADANIA website for specific warranty details and contact information.