Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO Varvara 204539A 2-Light Wall Sconce. Please read this manual thoroughly before installation and retain it for future reference.
The EGLO Varvara vanity light is a modern fixture designed for various rooms, including bathrooms. It features a clear ribbed glass shade and a black finish, offering versatile installation options both horizontally and vertically.
Image 1: EGLO Varvara 2-Light Wall Sconce. This image shows the cylindrical light fixture with two exposed bulbs, a clear ribbed glass shade, and a black mounting base.
Important Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure the fixture is properly grounded.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all components are present before beginning installation:
- Varvara 2-Light Wall Sconce Fixture
- Clear Ribbed Glass Shade
- Mounting Hardware (screws, wire nuts, mounting plate)
- Optional Decorative Black Trims
Note: Two E26 base bulbs (max 40W each) are required and not included.
Setup and Installation
This fixture is designed for flush mount installation and can be mounted vertically or horizontally.
Tools Required (Not Included):
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Electrical Tape
- Safety Glasses
Installation Steps:
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltage tester.
- Prepare Mounting Plate: Attach the mounting plate to the junction box using the provided screws. Ensure it is securely fastened.
- Electrical Connections:
- Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box. Secure with a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box. Secure with a wire nut.
- Carefully tuck all wires into the junction box.
- Attach Fixture: Align the fixture base with the mounting plate and secure it with the provided screws.
- Install Glass Shade and Trims: Carefully slide the clear ribbed glass shade onto the fixture. If desired, attach the decorative black trims to the ends of the glass shade.
- Install Bulbs: Screw in two E26 base bulbs (not included) into the sockets. Do not exceed 40W per bulb.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.
Image 2: EGLO Varvara 2-Light Wall Sconce installed in a bathroom. The fixture is mounted vertically above a sink and below a mirror, demonstrating its application in a modern bathroom setting.
Operating Instructions
The EGLO Varvara 2-Light Wall Sconce operates as a standard light fixture. Once installed and powered, it can be controlled by a wall switch connected to the circuit.
- Power On/Off: Use the wall switch to turn the light fixture on or off.
- Dimmable Functionality: This fixture is LED compatible and dimmable. To utilize dimming capabilities, ensure you use dimmable E26 LED bulbs and a compatible dimmer switch (both sold separately).
Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture.
- Cleaning:
- Always turn off power before cleaning.
- Wipe the fixture with a soft, dry cloth.
- For the glass shade, use a mild glass cleaner applied to a cloth, then wipe the glass. Avoid spraying cleaner directly onto electrical components.
- Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement:
- Ensure power is off and bulbs have cooled before attempting to replace them.
- Unscrew old bulbs and screw in new E26 base bulbs (max 40W each).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Glass shade is loose. |
|
|
Specifications
| Model Number: | 204539A |
| Brand: | EGLO |
| Type: | 2-Light Wall Sconce / Vanity Light |
| Material: | Steel, Glass |
| Finish: | Black |
| Shade Material: | Clear Ribbed Glass |
| Bulb Base: | E26 (Medium Base) |
| Max Wattage per Bulb: | 40W |
| Bulbs Included: | No |
| Dimmable: | Yes (with compatible bulbs and dimmer switch) |
| Installation Type: | Flush Mount |
| Mounting Orientation: | Vertical or Horizontal |
| Product Dimensions: | 61 cm (L) x 8.3 cm (W) x 12.1 cm (H) |
| Power Source: | Corded Electric |
| Assembly Required: | No (Minor assembly for shade/trims) |
Warranty and Support
EGLO products are manufactured with high-quality materials and craftsmanship. For specific warranty information, please refer to the warranty card included with your product or visit the official EGLO website.
For technical support, missing parts, or any questions regarding your EGLO Varvara 2-Light Wall Sconce, please contact EGLO customer service. Contact details can typically be found on the EGLO website or product packaging.
Please retain your proof of purchase for warranty claims.
