UTY-TFNXZ2 Wi-Fi Interface Module User Manual

1. Introduction

The UTY-TFNXZ2 Wi-Fi Interface Module is designed to provide advanced control and monitoring capabilities for your Fujitsu mini split air conditioning system. This module enables seamless integration with the FGLair application, allowing users to manage their system remotely via a smartphone or tablet.

This manual provides essential information for the proper installation, operation, and maintenance of your UTY-TFNXZ2 module.

2. Product Overview

Figure 1: UTY-TFNXZ2 Wi-Fi Interface Module. This image shows the compact white module with a "W-LAN CONTROL" label and indicator lights, connected to a long white cable that terminates in a multi-colored wire connector.

The UTY-TFNXZ2 module facilitates comprehensive control over your Fujitsu mini split system, including setting temperature, selecting operation mode, adjusting fan speed, and managing louver position. It also supports scheduling and provides error alerts and email notifications directly to your mobile device.

Important Note: Some Fujitsu units may require the UTY-XCBXZ2 Interface Kit (sold separately) for compatibility with this Wi-Fi module. Please verify your system's requirements before installation.

Compatible Fujitsu Models:

• ASU9RLS2, ASU12RLS2, ASU15RLS2, ASU9RLS3, ASU12RLS3, ASU15RLS3
• ASU7RLF, ASU9RLF, ASU12RLF, ASU18RLF, ASU24RLF
• ASU7RLF1, ASU9RLF1, ASU12RLF1, ASU15RLF1
• AGU9RLF, AGU12RLF, AGU15RLF
• ASU18RLB, ASU24RLB, ASU30RLXB, ASU36RLXB
• ASU30RLX, ASU30RLXEH, ASU30CLX1, ASU36CLX1
• AUU7RLF, AUU9RLF, AUU12RLF, AUU18RLF
• ARU7RLF, ARU9RLF, ARU12RLF, ARU18RLF, ARU24RLF

3. Setup and Installation

This section outlines the general steps for installing the UTY-TFNXZ2 Wi-Fi Interface Module. Professional installation by a qualified HVAC technician is highly recommended to ensure proper function and to avoid damage to your mini split system.

3.1. Before You Begin

• Ensure your Fujitsu mini split system is compatible with the UTY-TFNXZ2 module.
• Confirm if the UTY-XCBXZ2 Interface Kit is required for your specific model.
• Turn off the power to your mini split system at the circuit breaker before beginning any installation work.
• Gather necessary tools (e.g., screwdriver, wire cutters).

3.2. Physical Installation

1. Locate the communication port on your Fujitsu mini split indoor unit. Refer to your mini split's specific installation manual for the exact location.
2. Connect the cable from the UTY-TFNXZ2 module to the designated communication port. Ensure the connector is securely seated.
3. Mount the UTY-TFNXZ2 module in a suitable location near the indoor unit, ensuring it has good Wi-Fi signal reception. Use the mounting holes on the module if applicable.
4. Route the cable neatly and securely, avoiding interference with moving parts or heat sources.

3.3. Network Configuration (FGLair App)

1. Download the "FGLair" app from your smartphone's app store (available for iOS and Android).
2. Create an account or log in if you already have one.
3. Follow the in-app instructions to add a new device. This typically involves putting the UTY-TFNXZ2 module into pairing mode (refer to the module's indicator lights for status) and connecting it to your home Wi-Fi network.
4. Once connected, the app will guide you through linking the module to your Fujitsu mini split system.
5. Verify successful connection by checking the module's indicator lights and attempting to control your mini split system via the FGLair app.

4. Operating Instructions

Once the UTY-TFNXZ2 module is successfully installed and configured, you can control your Fujitsu mini split system using the FGLair app.

4.1. Basic Controls via FGLair App

• Power On/Off: Toggle the system's power.
• Operation Mode: Select from modes such as Cool, Heat, Fan, Dry, or Auto.
• Set Temperature: Adjust the desired temperature.
• Fan Speed: Choose from various fan speed settings (e.g., Low, Medium, High, Auto).
• Louver Position: Adjust the vertical and horizontal airflow direction.

4.2. Advanced Features

• Scheduling: Create custom schedules for your mini split system to automatically adjust settings based on time of day or week.
• Notifications: Configure the app to send alerts for system errors or operational status changes via email or push notifications.
• Energy Monitoring: (If supported by your mini split model and app version) Monitor energy consumption.

5. Maintenance

The UTY-TFNXZ2 Wi-Fi Interface Module requires minimal maintenance. Regular checks can help ensure optimal performance.

• Cleaning: Periodically wipe the module's exterior with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Firmware Updates: Ensure the FGLair app and the module's firmware are kept up-to-date. The app will typically notify you of available updates. Follow the in-app instructions for firmware updates.
• Connection Check: Occasionally verify that the module's indicator lights show a stable connection to both the mini split system and your Wi-Fi network.

6. Troubleshooting

If you encounter issues with your UTY-TFNXZ2 Wi-Fi Interface Module, refer to the following common troubleshooting steps:

If problems persist, please contact Fujitsu customer support or a qualified HVAC technician.

7. Specifications

8. Warranty Information

Specific warranty details for the UTY-TFNXZ2 Wi-Fi Interface Module are typically provided by the manufacturer or the point of purchase. Please refer to the documentation included with your product or contact the seller for precise warranty terms and conditions. Generally, warranty covers defects in materials and workmanship under normal use.

Keep your proof of purchase for any warranty claims.

9. Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fujitsu customer support or your authorized Fujitsu dealer.

You may also find additional resources and FAQs on the official Fujitsu General website or within the FGLair application's help section.