HAPAW PS-5 Cooling Stand and PSVR2 Charging Station User Manual

Introduction

Thank you for choosing the HAPAW PS-5 Cooling Stand and PSVR2 Charging Station. This multifunctional accessory is designed to enhance your gaming experience by providing efficient cooling for your PlayStation 5 console, convenient charging for up to four controllers (two PS5 DualSense and two PSVR2 Sense controllers), and organized storage for your PSVR2 headset and gaming accessories. It is compatible with both Disc and Digital Editions of the PS5 console.

Package Contents

Please verify that all items listed below are included in your package:

• 1x PS5 Cooling Stand/Controller Charging Station
• 5x Magnetic Charging Terminals (for PS5 and PSVR2 controllers)
• 1x PSVR2 Headset Holder
• 1x Fixing Screw (for securing PS5 console)
• 2x Magic Straps (for cable management)
• 1x USB-A Cable (2-in-1 for power supply)
• 1x User Manual

Image: Detailed view of all components included in the HAPAW PS-5 Cooling Stand and PSVR2 Charging Station package, laid out neatly.

Setup Instructions

Follow these steps to set up your HAPAW Cooling Stand:

1. Prepare the Stand: Take out the fixing screw from the stand's base.
2. Attach PS5 Console: Carefully place your PS5 console onto the stand, aligning the console's bottom fixing port with the screw hole on the stand. Secure the console by inserting and tightening the fixing screw.
3. Connect Power: Plug the 2-in-1 USB-A charging cable from the stand into a USB-A port on your PS5 console. Alternatively, if the console is off, power the stand using a 5V/3A AC adapter (not included) plugged into the Type-C input port on the stand. Note: It is not recommended to use both the console and an AC adapter to supply power simultaneously.
4. Install Headset Holder: Join the two parts of the PSVR2 headset holder and plug it into the designated slot on the stand.
5. Prepare Controllers for Charging: Insert a magnetic charging terminal into the Type-C port of each PS5 DualSense controller and PSVR2 Sense controller you wish to charge.
6. Place Controllers: Gently place the controllers onto their respective charging slots on the stand. The magnetic terminals will align automatically for charging.
7. Organize Cables: Use the provided magic straps to manage any excess cables for a tidy setup.

Image: Visual instructions for assembling the HAPAW PS-5 Cooling Stand, showing how to attach the console, connect cables, and install the headset holder.

Operating Instructions

Cooling Function

The stand features dual cooling fans with three adjustable speed levels (3800 RPM, 3600 RPM, 3400 RPM) to efficiently dissipate heat from your PS5 console. A touch switch on the front of the stand allows you to cycle through the fan speeds or turn them off. The LED indicators will show the current fan speed setting.

Image: Illustrates the 'Super Cooling' feature of the HAPAW stand, highlighting the dual fans and the three adjustable speed levels (3800 RPM, 3600 RPM, 3400 RPM) controlled by a touch switch.

Image: Shows the quiet brushless motor technology used in the HAPAW cooling stand, emphasizing its low noise operation (40dB) and rapid cooling capabilities.

Charging Controllers

The stand provides wireless charging for two PS5 DualSense controllers and two PSVR2 Sense controllers simultaneously. The magnetic charging terminals ensure a secure and efficient connection. LED indicators for each controller slot will display the charging status: red for charging and green for no load or fully charged. PS5 controllers typically charge in 3-3.5 hours, while PSVR2 controllers charge in 1.5-2 hours.

Image: Shows the wireless charging station for PS5 and PSVR2 controllers, indicating charging times (3-3.5H for PS5, 1.5-2H for PSVR2) and LED indicators for charging status.

Image: Close-up of the LED indicators on the HAPAW stand, showing red for 'Charging' and green for 'No load or Full Charged' for both PS5 and PSVR2 controllers.

Storage and Organization

The HAPAW stand provides a centralized solution for storing your PS5 console, PSVR2 headset, PS5 DualSense controllers, and PSVR2 Sense controllers. The dedicated headset holder keeps your VR gear secure and easily accessible. Integrated USB hubs (2x USB-A output, 1x Type-C input/output) allow for charging additional devices simultaneously, helping to maintain a neat and orderly gaming area.

Image: Depicts the HAPAW PS-5 Accessories All-in-1 Stand, showcasing its ability to store the PS5 console, controllers, VR headset, and remote, solving accessory clutter.

Image: A 'Before and After' comparison showing a messy desktop with gaming accessories versus a neat and orderly desktop with the HAPAW PS-5 Cooling Stand organizing all devices.

Console Compatibility

The HAPAW PS-5 Cooling Stand is designed to be compatible with both the Disc Edition and Digital Edition of the PlayStation 5 console, offering versatile use for all PS5 owners.

Image: Illustrates the HAPAW 3-IN-ONE PS5 Stand's compatibility with both the Disc Edition and Digital Edition of the PlayStation 5 console.

Maintenance

To ensure optimal performance and longevity of your HAPAW Cooling Stand, follow these maintenance guidelines:

• Cleaning: Regularly wipe the stand with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Fan Vents: Ensure the fan vents on the stand are clear of obstructions to maintain efficient airflow.
• Cable Management: Periodically check and re-organize cables to prevent tangling and damage.
• Storage: When not in use for extended periods, store the stand in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your HAPAW Cooling Stand, please refer to the following common solutions:

• Fans Not Working:
  • Ensure the USB-A power cable is securely connected to the PS5 console or a 5V/3A AC adapter.
  • Press the fan speed touch switch to ensure the fans are turned on and set to a desired speed.
• Controllers Not Charging:
  • Verify that the magnetic charging terminals are correctly inserted into the controller's Type-C port.
  • Ensure the controllers are properly seated in their respective charging slots on the stand, allowing the magnetic connection to engage.
  • Check the LED indicators; if they are not red (charging), re-seat the controller or check the power connection to the stand.
• Stand Not Powering On:
  • Confirm that the 2-in-1 USB-A cable is firmly connected to both the stand and the PS5 console.
  • If using an AC adapter, ensure it is a 5V/3A adapter and properly connected to a working power outlet.

Specifications

Warranty and Support

HAPAW products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your PS-5 Cooling Stand and PSVR2 Charging Station, please refer to the contact information provided on the product packaging or visit the official HAPAW website. Please retain your proof of purchase for warranty claims.