Introduction
The MIATONE BOOMPRO is a portable Bluetooth speaker designed to deliver powerful 36W stereo sound with deep bass. It features Bluetooth 5.3 for stable connectivity, a 5000mAh battery for extended playtime, IPX7 waterproof rating, and dynamic color lights. This manual provides detailed instructions for setting up, operating, and maintaining your speaker.
What's in the Box
- 1 x MIATONE BOOMPRO Bluetooth Speaker
- 1 x User Manual
- 1 x USB Type-C Charging Cable
Product Overview
Figure 1: Front view of the MIATONE BOOMPRO speaker, highlighting the control buttons and the top speaker with illuminated MIATONE logo.
Figure 2: Dimensions of the MIATONE BOOMPRO speaker, measuring 7.3 inches in height and 2.8 inches in both depth and width.
The speaker features a cylindrical design with a durable mesh fabric exterior and hard rubber end caps. The control panel is located on the side, providing easy access to power, volume, and playback functions. The top and bottom ends house the main speaker and passive radiators, respectively, with illuminated rings indicating power and status.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the supplied USB Type-C charging cable to the speaker's charging port and a compatible USB power adapter (not included). The charging time is approximately 3 hours for a full charge. A full charge provides up to 24 hours of playtime.
Figure 3: The speaker in an outdoor setting, illustrating its portability and long battery life for extended use.
2. Power On/Off
- To power on, press and hold the Power button () for 2 seconds. The indicator light will illuminate.
- To power off, press and hold the Power button for 2 seconds. The indicator light will turn off.
3. Bluetooth Pairing
The speaker will automatically enter pairing mode when powered on for the first time or if no device is connected. The indicator light will flash rapidly.
- Ensure the speaker is powered on and in pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth.
- Search for available Bluetooth devices and select "MIATONE BOOMPRO" from the list.
- Once connected, the indicator light will remain solid, and you will hear a confirmation tone.
The speaker supports Bluetooth 5.3, providing a stable connection up to 100 feet (30 meters) in open areas.
4. True Wireless Stereo (TWS) Pairing
You can pair two MIATONE BOOMPRO speakers together for a true stereo sound experience.
- Ensure both speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), double-press the Play/Pause button (). It will enter TWS pairing mode.
- The primary speaker will automatically search for the secondary speaker. Once connected, you will hear a confirmation tone, and the indicator lights on both speakers will synchronize.
- Now, connect your device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.
To disconnect TWS, double-press the Play/Pause button on either speaker.
Operating the Speaker
Control Buttons
| Button | Function |
|---|---|
| Power Button () | Press and hold for 2 seconds to Power On/Off. Short press to switch light modes. |
| Volume Up (+) | Short press to increase volume. Press and hold for next track. |
| Volume Down (-) | Short press to decrease volume. Press and hold for previous track. |
| Play/Pause Button () | Short press to Play/Pause music. Double-press to enter/exit TWS pairing mode. |
Dynamic Color Lights
The MIATONE BOOMPRO features built-in RGB lights that create a vibrant visual experience. You can cycle through different light modes by short pressing the Power button. The lights can be turned off if desired.
Figure 4: The speaker displaying its dynamic RGB color lights, enhancing the audio experience.
Waterproof Feature (IPX7)
The speaker has an IPX7 waterproof rating, meaning it can be submerged in water up to 1 meter (3 feet) for up to 30 minutes. This makes it suitable for use near pools, beaches, or in rainy conditions. Ensure the charging port is dry before connecting the charging cable.
Figure 5: The speaker demonstrating its IPX7 waterproof capability by being partially submerged in water.
Figure 6: Illustration of the speaker's Type-C charging port, which is designed to be waterproof without needing an extra cover.
Maintenance
Cleaning
To clean the speaker, use a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the speaker is completely dry before charging or prolonged storage.
Storage
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to approximately 50% every few months to maintain battery health.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect the speaker to a power source using the USB Type-C cable. |
| Cannot pair with Bluetooth device. |
|
| No sound or low volume. |
|
| Buzzing sound or distortion. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | BOOMPRO |
| Speaker Maximum Output Power | 36 Watts |
| Bluetooth Version | 5.3 |
| Bluetooth Range | Up to 100 feet (30 meters) |
| Battery Capacity | 5000 mAh |
| Playtime | Up to 24 Hours |
| Charging Time | Approximately 3 Hours |
| Waterproof Rating | IPX7 |
| Dimensions (D x W x H) | 2.8" x 2.8" x 7.3" |
| Item Weight | 17.6 Ounces (1.1 pounds) |
| Material | Mesh Fabric and ABS |
| Charging Port | USB Type-C |
Warranty and Support
The MIATONE BOOMPRO speaker comes with a limited warranty. For detailed warranty information or technical support, please refer to the warranty card included with your product or visit the official MIATONE website. Please retain your proof of purchase for warranty claims.
