MIATONE QBOX Bluetooth Speaker

Introduction

This device can be used with tablets, notebooks, and many types of smartphones to stream music and enjoy hands-free calling. To get the best results, please read this manual before use.

Package Contents

• 1x Bluetooth Speaker
• 1x Type C Charging Cable
• 1x Aux Cable
• 1x User Manual

Product Diagram

Diagram showing the speaker with numbered parts: ① Power on/off, ② Charging Status, ③ Audio Port, ④ Type C Charging Port, ⑤ Music Play/Pause/Pick/End Phone Call, ⑥ Volume Up/Next Track, ⑦ Volume Down/Previous Track, ⑧ Working TWS Status.

Important Safety Precautions

1. Keep the product and its charging cable away from excessive heat.
2. Do not operate this device with a damaged cable or after it has malfunctioned or been damaged.
3. Do not disassemble the device.
4. Only use the device on a flat, stable surface.

Charging Your Speaker

1. Connect one end of the charging cable to the charging port on the speaker and the other end to a suitable USB port on your computer.
2. The internal battery takes approximately three hours to charge when completely drained.
3. An orange LED light indicates charging; it turns off when fully charged.

Power On/Power Off

• Power On: Press and hold the power button for 2 seconds. The working status LED will flash green.
• Power Off: Press and hold the power button for 2 seconds. The working status LED will turn off.

Pairing Bluetooth Devices to Your Speaker

1. Ensure your Bluetooth audio source is close to the speaker.
2. Press and hold the power button for 2 seconds to power on the speaker; the working status LED will flash green.
3. Activate the Bluetooth function on your device and select "QBOX".
4. If required, enter the password '0000' to confirm pairing.
5. The speaker will beep when paired, and the green light will turn solid. Your device will show the connected Bluetooth icon.

Bluetooth Music Play

• Press the play/pause button to pause or play music.
• Press the volume up button (+) to increase volume. Press and hold to skip to the next song.
• Press the volume down button (-) to decrease volume. Press and hold to skip to the previous song.

Bluetooth Phone Call

• Press the call button to answer an incoming call; press again to end the call.
• During a call, press and hold the volume up (+) or volume down (-) buttons to switch between the speaker and phone for audio.

Aux-in Mode

1. Connect the speaker and your device using the provided Aux-in cable.
2. Press the play/pause button to play or mute music.
3. In Aux-in Mode, song changes must be controlled from your connected device.

TWS (True Wireless Stereo)

If you have two MIATONE QBOX speakers, you can use TWS to achieve wireless stereo sound.

1. Press and hold the power button on both speakers for 2 seconds to power them on. Ensure neither speaker is connected to a Bluetooth device.
2. Press the TWS button on one speaker. Its LED will flash orange. After 2 seconds, the two speakers will automatically connect.
3. A confirmation tone will sound. One speaker's LED will blink green (master), and the other will remain orange (slave), indicating successful TWS connection.
4. Activate Bluetooth on your device and select "QBOX" to pair. The master speaker's LED will turn solid green upon connection.
5. Press the TWS button to disconnect the TWS connection.
6. Press and hold the TWS button to clear all previous connections.

Specifications

• Bluetooth Version: V5.0
• Maximum Output: 16W
• Built-in Power: Li-ion 2500mAh
• SNR: >75dB
• Wireless Working Frequency: 2.402-2.480GHZ
• Wireless Transmission Distance: up to 33 ft (10M)
• Charging Time: approx. 3 hours
• Playback Time: 8-10 hours
• Charging: DC 5 V± 0.5/800mA
• Size: Dia 84mm*95mm

Care and Maintenance

1. This logo ?? indicates that no naked flames, such as a candle, can be placed on or near the device.
2. Dispose of electrical and electronic equipment separately from municipal waste. Use designated collection systems and locations provided by local councils and retailers for proper recycling.
3. Use this device in temperate climates only.
4. This device may be used by children aged 8 years and older, and by persons with reduced physical, sensory, or mental abilities, or lack of experience or knowledge, provided they are supervised or have received adequate instructions and understand the risks. Children must not play with the device. Cleaning and maintenance should be done by children only with supervision.
5. The electrical socket must remain easily accessible if it serves as the means of disconnection.
6. Always unplug the device before cleaning.
7. Clean the device with a soft, dry cloth only. Never use solvents.
8. Pay attention to the environmental aspects of battery disposal.
9. The battery shall not be exposed to excessive heat such as sunshine or fire.
10. Use the apparatus in moderate climates only.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.