Miatone London Quick Start Guide

Package Contents

Your Miatone London package includes:

• [Charging Case]
• [Wireless Earbuds] (Left and Right)
• [USB-C Charging Cable]

How to Wear

To ensure a secure and comfortable fit:

1. Insert the earbuds directed towards your ear canal.
2. Twist gently until the earbuds fit comfortably and provide a better sound experience.

First Usage

For first-time use, it is recommended to fully charge the product.

[Earbuds placed inside the charging case]

Power On & Pairing

The earbuds will power on and pair automatically when removed from the charging case.

Bluetooth Version: V5.3

[Charging case with earbuds], [Earbuds separated], [Bluetooth symbol]

Connected

Once paired, your device should show "Miatone London Connected" in the Bluetooth list.

[Earbuds in charging case], [Bluetooth icon], [Device name]

Control

Control your music, calls, and voice assistant with touch gestures:

For more details on operation, please refer to the back notice.

Power Off

The earbuds will power off automatically when placed back into the charging case.

[Earbuds placed inside the charging case]

*When the case is out of battery, please power on or off the earbuds by manual operation.

Charging

Charging the Case:

1. Connect the Type-C end of the included charging cable to the charging port on your case.
2. Plug the other end of the USB charging cable into a suitable USB port (e.g., computer or standard cell phone charger) to recharge the case's internal battery.

The case indicator will flash green while charging and be solid green once fully charged.

Charging the Earbuds:

Place the earbuds into the charging case. They will charge automatically.

[Charging case], [USB-C cable], [Power source], [Charging indicator], [Fully charged indicator]

Important Notice for Charging:

• Before charging, ensure earbuds are at room temperature (46°F to 102°F / 8°C to 39°C).
• Use only agency-approved power supplies (e.g., UL, CSA, VDE, CCC) supporting 5V/0.5A.
• Use the included charging cable.
• For the first use, fully charge the product.
• Charge the case when the low battery indicator is shown.
• To prolong battery life, fully charge the case at least once every 3 months.

Manual Control

If the case is out of battery, you can manually power the earbuds on or off:

• Power On: Touch and hold the touch area on each earbud for 2 seconds.
• Power Off: Touch and hold the touch area on each earbud for 2 seconds.

[Earbuds], [Touch area]

Specifications

Troubleshooting

Earbuds won't power on.

Check if the charging case has battery. If not, power on the earbuds manually (touch the button for 2 seconds). If you cannot hear a prompt sound from the earbuds, they may be out of battery. Place both earbuds in the charging case and charge the case. The case indicator will flash green while charging and be solid green when fully charged.

Earbuds don't connect with mobile device.

Delete the earbuds' pairing name from your device's Bluetooth list, including any duplicate entries. Power on the earbuds as described previously to complete the connection with your mobile device.

Two earbuds don't pair.

Place both earbuds in the charging case and close the lid. Then, open the lid and take them out; they should pair automatically.

Earbuds can't be charged.

• Check if the charging case has battery. If not, charge the case using the included cable.
• Clean the charging contacts on the case and earbuds with a dry, soft cotton swab or equivalent.

No sound from earbuds.

• Ensure the volume is turned up.
• Verify that audio is playing.
• Try playing audio from a different app or music server.
• Play audio from your device's download list.
• Restart your mobile device.
• Place the earbuds back into the case, remove them, and put them into your ears again.
• Clean contacts with a dry, soft cotton swab.

Care and Maintenance

• This device may only be used in temperate climates.
• This device can be used by children aged 8 years and older, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, provided they are supervised or have received adequate instructions on using the device and understand the associated risks. Children must not play with this device. Cleaning and maintenance should not be done by children without supervision.
• Always unplug the device before cleaning.
• Clean the device with a soft, dry cloth only. Never use solvents.
• Attention should be drawn to the environmental aspects of battery disposal.

Disposal Information:

This logo [electrical waste symbol] indicates that electrical and electronic equipment should not be disposed of with unsorted municipal waste. Collection systems and locations are provided by local councils and retailers. By entrusting your end-of-life product to the proper recycling process, you help protect the environment and human health.

The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

This logo [no naked flames symbol] means that no naked flames, such as a candle, can be placed on or near the device.

Compliance Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

EC Declaration

This product complies with the below listed UK Directives:

• Radio Equipment Regulations 2017
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
• The Batteries and Accumulators (Placing on the Market) Regulations 2008 (as amended) and the Waste Batteries and Accumulators Regulations 2009 (as amended).
• Electromagnetic Compatibility Regulations 2016.
• Electrical Equipment (Safety) Regulations 2016.

FCC ID: 2AWG3-JSU21

[UK CA logo], [CE logo]