Roborock S8 Robot Vacuum and Mop Cleaner User Manual

1. Introduction

The Roborock S8 Robot Vacuum and Mop Cleaner is an advanced home cleaning device designed to provide efficient and thorough cleaning of various floor types. Featuring cutting-edge navigation, powerful suction, and intelligent mopping capabilities, the S8 simplifies your cleaning routine.

Figure 1: Roborock S8 Robot Vacuum and Mop Cleaner (White model).

Key Features:

• Reactive 3D Obstacle Avoidance: Utilizes 3D structured light and infrared image technology to identify and bypass unknown objects in both bright and dark environments.
• DuoRoller Brush: Dual rubber brush system designed for enhanced vacuuming and reduced hair tangles across various floor types.
• 6000Pa Suction: Provides powerful suction for deep cleaning of dust, debris, and pet hair from carpets and hard floors, with Carpet Boost+ for enhanced carpet cleaning.
• Upgraded VibraRise 2.0 Mopping System: Features a wider mopping zone, up to 3000 times/min high-speed scrubbing, and consistent downward pressure for effective stain removal.
• PreciSense LiDAR Navigation: Enables precise mapping and navigation for efficient cleaning paths and customized cleaning routines.

Included Components:

• S8 Robot Vacuum (1)
• VibraWash Water Tank (1)
• VibraWash Mop Cloth (1)
• VibraWash Mop Cloth Mount (1)
• Charging Dock (1)
• Power Cable (1)
• User Manual (1)

2. Setup

2.1 Unboxing and Initial Placement

Carefully remove all components from the packaging. Place the Charging Dock against a wall on a hard, level surface. Ensure there is adequate clear space around the dock (at least 0.5m on both sides and 1.5m in front) for the robot to easily dock.

2.2 Connecting the Charging Dock

Connect the power cable to the Charging Dock and plug the other end into a wall outlet. Ensure the power indicator on the dock illuminates.

2.3 Initial Charging

Place the Roborock S8 onto the Charging Dock. The robot will automatically begin charging. For first-time use, ensure the robot is fully charged before starting a cleaning cycle. The battery indicator will show its charging status.

2.4 App Connection

Download the Roborock app from your mobile device's app store. Follow the in-app instructions to connect your Roborock S8. The app allows for advanced features such as 3D mapping, custom routines, scheduling, and multi-level mapping. Note: The robot only supports 2.4 GHz Wi-Fi networks.

Figure 2: Total App Control features including 3D Mapping and Custom Routines.

3. Operating the Roborock S8

3.1 Cleaning Modes

The Roborock S8 offers various cleaning modes to suit your needs:

• Vacuum Only: Ideal for dry debris and carpets.
• Mop Only: For hard floors requiring wet cleaning.
• Vacuum & Mop: A combined mode for comprehensive cleaning of hard floors. The VibraRise system automatically lifts the mop when a carpet is detected.

Figure 3: The Roborock S8 features 6000Pa suction for deep cleaning.

3.2 Navigation and Obstacle Avoidance

The S8 uses PreciSense LiDAR Navigation to create accurate maps of your home, ensuring efficient and systematic cleaning. Its Reactive 3D Obstacle Avoidance technology helps it identify and navigate around common household items, reducing the risk of collisions or getting stuck.

Figure 4: Reactive 3D Obstacle Avoidance allows the robot to gracefully glide through various environments.

3.3 App Control Features

The Roborock app provides comprehensive control over your S8:

• 3D Mapping: Accurately build and visualize your home's layout.
• Smart No-Go Zones: Define areas the robot should avoid.
• Custom Routines & Scheduling: Set specific cleaning schedules and routines for different areas.
• Multi-Level Mapping: The robot can recognize and map up to four different floor levels.

3.4 Voice Control

The Roborock S8 is compatible with voice assistants like Amazon Alexa and Google Home, allowing for hands-free control of your cleaning tasks.

3.5 Off-Peak Charging

Schedule charging for off-peak hours to save on energy costs and contribute to energy efficiency.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your Roborock S8.

4.1 DuoRoller Brush Cleaning

Periodically remove the DuoRoller brushes and clear any tangled hair or debris. The design allows for easy removal of brush ends for thorough cleaning.

Figure 5: The DuoRoller Brush system effectively picks up hair and debris.

4.2 VibraRise Mopping System Maintenance

Remove and clean the VibraWash mop cloth after each mopping session. The mop cloth mount should also be cleaned regularly.

Figure 6: The VibraRise 2.0 Mopping System provides high-speed scrubbing.

4.3 Dustbin Emptying

Empty the robot's dustbin regularly, depending on usage and debris accumulation. For models with an Auto-Empty Dock, the dock will automatically empty the robot's dustbin into a larger bag.

4.4 Water Tank Refilling and Cleaning

Refill the VibraWash Water Tank with clean water before each mopping session. Empty and clean the dirty water tank (if applicable, for models with Auto-Wash/Fill Dock) every few days.

4.5 Filter Cleaning

Clean the robot's filter regularly to maintain suction performance. Tap out dust or rinse with water as per the user manual's instructions.

4.6 Sensor Cleaning

Wipe down the robot's sensors (including Reactive 3D and LiDAR sensors) with a clean, dry cloth to ensure accurate navigation and obstacle avoidance.

5. Troubleshooting

If you encounter issues with your Roborock S8, refer to the following common troubleshooting tips:

• Robot not charging: Ensure the power cable is securely connected to the dock and the outlet. Check that the robot is correctly placed on the charging contacts.
• Robot getting stuck frequently: Clear obstacles from the cleaning path. Ensure sensors are clean. Check for tangled hair in the brushes or wheels.
• Poor cleaning performance: Empty the dustbin. Clean or replace the filter. Check and clean the main brush and side brush. Ensure the water tank is filled for mopping.
• App connectivity issues: Ensure your Wi-Fi network is 2.4 GHz. Restart your router and the robot. Try re-pairing the robot with the app.
• Unusual noises: Check for foreign objects caught in the main brush, side brush, or wheels.

For more detailed troubleshooting, consult the full user manual (PDF) available on the product's Amazon page or Roborock's official website.

6. Specifications

7. Warranty & Support

The Roborock S8 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Roborock Customer Service through their official website or the contact information provided in your user manual.

You can also find additional resources and FAQs on the Roborock Store on Amazon.