Aanyhoh Battery Operated Wall Sconces

1. Overview

The Aanyhoh Battery Operated Wall Sconces offer a convenient and stylish lighting solution for your home. Designed for easy installation without the need for complex wiring, these USB rechargeable LED lights provide warm, eye-friendly illumination. Their modern design and rotatable head make them versatile for various indoor settings, from bedrooms to living rooms, enhancing both aesthetics and functionality.

Image: Aanyhoh Battery Operated Wall Sconces in a modern setting.

2. Features

• Battery Operated & USB Rechargeable: No wiring required, offering flexible placement. Features a built-in 8000mAh magnetic battery compartment.
• Detachable Battery Compartment: Easily remove the battery for charging, eliminating the need to remove the entire sconce from the wall. Full charge takes less than 5 hours and provides over 15 hours of continuous light at highest brightness.
• Easy Installation: All mounting hardware is included for quick and straightforward setup.
• 360° Rotatable: Adjust the angle of the light to suit your preference and illuminate specific areas.
• Eye-Friendly LED: Provides soft, flicker-free 3000K warm white light to prevent eye fatigue and strain.
• Modern Design & Wide Application: Minimalist design suitable for various rooms including bedrooms, living rooms, hallways, and offices.

Image: Key features of the Aanyhoh Wall Sconce.

3. What's in the Box

• Wall Sconce (2 units)
• USB-C Charging Cable (80cm length)
• Mounting Hardware

4. Setup

1. Initial Charge: Before first use, fully charge the battery. Batteries may lose power during prolonged transportation and storage.
2. Mounting: Use the included mounting hardware to securely attach the wall plate to your desired location on the wall. No electrical wiring is needed.
3. Attach Sconce: The sconce features a magnetic suction design. Once the wall plate is installed, simply attach the sconce to it.

Image: Detachable battery compartment for easy charging.

5. Operating Instructions

Power On/Off

• Using the Remote Control: Press the 'ON' button to turn the light on, and 'OFF' to turn it off.
• Using the Sconce Switch: A physical switch is located on the sconce itself for direct control.

Adjusting Brightness and Color Temperature

• Brightness Adjustment: Use the brightness control buttons on the remote to increase or decrease the light intensity.
• Color Temperature Adjustment: The remote control allows you to change the warmth of the light, from cooler tones to warmer 3000K warm white.

Adjusting Light Angle

• The sconce features a 360° rotatable design. Gently rotate the light bar to direct illumination as desired.

Image: Sconce emitting warm light.

6. Maintenance

Charging the Battery

• When the light dims or stops working, remove the magnetic battery compartment from the sconce.
• Connect the included USB-C cable to the charging port on the battery and plug the other end into a standard USB power adapter (not included).
• A red indicator light will show during charging, turning off when fully charged.
• Important: Do not use a fast charger over 5V to charge the wall light to prevent damage.

Cleaning

• Wipe the sconce with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. Troubleshooting

• Light not turning on: Ensure the battery is fully charged. Check if the on/off switch on the sconce or the remote control is activated.
• Battery charge doesn't last long: Ensure the battery was fully charged (charging takes less than 5 hours). Prolonged transportation and storage can cause batteries to lose power; fully charge before first use. Avoid using fast chargers over 5V.
• One sconce is noticeably dimmer: This could indicate a battery issue. Try fully charging the dimmer sconce's battery. If the issue persists, contact customer support for assistance.
• Missing parts: If any parts are missing upon arrival, please contact customer support for replacement.

8. Specifications

Image: Product Dimensions.