1. Important Safety Instructions
Please read all instructions carefully before assembly and use. Retain this manual for future reference.
- Ensure all components are present and undamaged before beginning assembly.
- Assemble the unit on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging the material.
- Keep small parts away from children to prevent choking hazards.
- Do not stand on the storage box. The seat load capacity is 120 kg.
- Do not exceed the internal load capacity of 100 kg for stored items.
- Periodically check all fasteners to ensure they remain tight.
2. Package Contents
Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Padded Chest Lid (1)
- Side Panels (2)
- Front/Back Panels (2)
- Bottom Panel (1)
- Steel Frame Components (various)
- Adjustable Feet (4)
- Hinge Mechanism (1 set)
- Assembly Hardware (screws, bolts, Allen key)
- Assembly Manual (this document)
3. Setup and Assembly
Follow these steps carefully to assemble your TecTake Calico Quilted Storage Box.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, flat surface. Refer to the parts list to identify each piece.
- Assemble the Steel Frame: Connect the steel frame components using the provided screws and Allen key. Ensure all connections are secure but do not fully tighten yet.
- Attach Side and Front/Back Panels: Insert the wooden side and front/back panels into the steel frame. Secure them with the appropriate screws.
- Install Bottom Panel: Place the bottom panel into the assembled frame and secure it.
- Attach Adjustable Feet: Screw the four adjustable feet into the bottom of the steel frame legs. These feet allow for height adjustment on uneven surfaces.
- Attach Hinge Mechanism: Secure the hinge mechanism to the back of the storage box frame and the padded lid. Ensure the hinges are aligned correctly for smooth operation.
- Attach Padded Lid: Carefully place the padded lid onto the hinge mechanism and secure it.
- Final Tightening: Once all components are in place and aligned, fully tighten all screws. Do not overtighten.

Image: Adjustable foot for leveling the storage box.

Image: Detail of the lid hinge mechanism, ensuring smooth opening and closing.

Image: Dimensional diagram of the storage box, illustrating overall and internal measurements.
4. Operating Instructions
The TecTake Calico Quilted Storage Box is designed for versatile use as both a storage unit and a seating option.
- Opening the Lid: Gently lift the padded lid from the front edge. The hinge mechanism will support the lid in an open position, allowing access to the storage compartment.
- Closing the Lid: Carefully lower the lid until it rests securely on the box frame. Avoid slamming the lid to prevent damage to the hinges.
- Using as Seating: The padded lid provides a comfortable seating surface. Ensure the lid is fully closed before using it as a seat. The maximum weight capacity for seating is 120 kg.
- Storage: Utilize the internal compartment for storing various items such as blankets, pillows, books, or other household goods. Do not exceed the internal load capacity of 100 kg.

Image: The storage box with its lid open, showcasing its ample internal storage capacity for items like blankets.

Image: Close-up view of the black faux leather quilted top, highlighting its texture and button details.
5. Maintenance
Proper care will ensure the longevity and appearance of your storage box.
- Cleaning the Wood Panels: Wipe wooden surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cleaning the Faux Leather: For the padded top, use a soft cloth with mild soap and water. Wipe dry immediately. Do not use solvents or strong detergents.
- Frame Care: The steel frame can be wiped clean with a damp cloth.
- Regular Inspection: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the materials.
6. Troubleshooting
If you encounter any issues with your storage box, refer to the following common solutions.
- Wobbly or Uneven: Check if all adjustable feet are properly installed and adjusted. Rotate the feet to level the box on uneven floors. Ensure all frame screws are tightened.
- Lid Not Closing Properly: Verify that the hinge mechanism is correctly aligned and secured. Check for any obstructions in the storage compartment that might prevent the lid from closing fully.
- Squeaking Noises: Apply a small amount of silicone lubricant to the hinge points if they produce noise during operation.
- Scratches on Surfaces: Minor scratches on wood panels can sometimes be minimized with furniture polish or repair kits. For faux leather, avoid sharp objects.
If problems persist, please contact customer support.
7. Specifications
| Model Number | 801077 |
| Overall Dimensions (W x D x H) | Approx. 81.5 x 41.5 x 50.5 cm (32.09 x 16.34 x 19.88 inches) |
| Inner Dimensions (W x D x H) | Approx. 73 x 37 x 32.5 cm |
| Volume | Approx. 88 Liters |
| Padding Thickness | 4 cm |
| Chipboard Thickness | Approx. 1.5 cm |
| Steel Frame (Width x Depth) | Approx. 2 x 2 cm |
| Plastic Feet Adjustment | Approx. 1.5 cm |
| Seat Load Capacity | 120 kg |
| Internal Load Capacity | 100 kg |
| Materials | Engineered Wood, Faux Leather, Alloy Steel, Plastic |
| Item Weight | Approx. 17 kg (37.4 pounds) |
8. Warranty and Support
TecTake products are designed for quality and durability. For specific warranty information, please refer to the documentation provided at the time of purchase or visit the official TecTake website.
If you require assistance with assembly, parts, or have any questions regarding your TecTake 801077 Calico Quilted Storage Box, please contact our customer support team:
- Website: www.tectake.de (or your regional TecTake website)
- Email: Refer to your purchase documentation for specific contact details.
- Phone: Refer to your purchase documentation for specific contact details.
Please have your model number (801077) and purchase date ready when contacting support.





