1. Introduction
Thank you for choosing the AIKE Automatic Sensor Liquid Soap Dispenser, Model AK1333. This touch-free dispenser is designed to provide a hygienic and convenient way to dispense liquid soap, enhancing cleanliness in your home or office. Its sleek matte black stainless steel finish complements any modern decor. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Product Overview
Key Features:
- Works with liquid soap (not foaming soap).
- Touch-free sensor pump for hygienic operation, with a fast response time of 0.2 seconds.
- Durable stainless steel finish resists fingerprints and water spots.
- Rechargeable via Type-C charging cable (included), eliminating the need for disposable batteries.
- Five adjustable dispense levels for precise soap quantity control.
Components:
Familiarize yourself with the main parts of your AIKE soap dispenser:
- Dispenser Nozzle: Where soap is dispensed.
- Infrared Sensor: Detects hand movement for automatic dispensing.
- Power Button/Indicator Light: Controls power and indicates status.
- Charging Port (Type-C): Located on the back for recharging the internal battery.
- Soap Reservoir: Internal compartment for liquid soap.
Figure 2.1: The AIKE Automatic Sensor Liquid Soap Dispenser in use, showing soap being dispensed into a hand.
Figure 2.2: Various angles of the dispenser, highlighting its design and the location of the charging port.
3. Setup
3.1 Initial Charging:
- Locate the Type-C charging port on the back of the dispenser.
- Connect the provided Type-C charging cable to the dispenser and a compatible USB power adapter (not included).
- Allow the dispenser to fully charge before first use. The indicator light will change to confirm charging status (refer to indicator light section for details).
Figure 3.1: The Type-C charging port located on the back of the dispenser.
3.2 Filling the Dispenser:
- Gently twist and lift the top cap of the dispenser to reveal the soap reservoir opening.
- Pour liquid soap directly into the reservoir. Do not overfill.
- Replace the top cap, ensuring it is securely seated.
Figure 3.2: Easy refilling process by pouring liquid soap into the top opening.
3.3 Placement:
Place the dispenser on a flat, stable surface near a sink or desired location. Ensure there is enough clear space around the sensor for optimal operation.
Figure 3.3: The dispenser positioned on a kitchen countertop, demonstrating its compact size and aesthetic.
4. Operating Instructions
4.1 Power On/Off:
Press and hold the power button on the top of the dispenser for a few seconds to turn it on or off. The indicator light will flash to confirm the action.
4.2 Dispensing Soap:
Once powered on, simply place your hand under the dispenser nozzle. The infrared sensor will detect your hand and automatically dispense a pre-set amount of liquid soap.
4.3 Adjusting Dispense Volume:
The dispenser offers 5 adjustable levels for soap volume. To change the dispense level, briefly press the power button while the dispenser is on. Each press will cycle through the levels. The indicator light may flash a certain number of times to indicate the current level (refer to product specific light patterns if available).
Figure 4.1: The dispenser's adjustable output, allowing users to select from 5 different soap volume levels.
5. Maintenance
5.1 Cleaning:
To clean the exterior of the dispenser, wipe it with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the stainless steel finish. Do not submerge the dispenser in water.
5.2 Refilling:
Refill the dispenser when the soap level is low. Follow the instructions in Section 3.2. It is recommended to use liquid soap that is not too thick to prevent clogging.
5.3 Charging:
Recharge the dispenser when the battery indicator light signals low power. A full charge ensures optimal performance and longevity of the battery.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not working/no soap dispensed. | Low battery; Soap reservoir empty; Sensor obstructed; Soap too thick/clogged. | Charge the dispenser; Refill with soap; Clean sensor area; Dilute soap with water or clear nozzle. |
| Soap dispenses too little/too much. | Dispense level setting is incorrect. | Adjust the dispense level by briefly pressing the power button (refer to Section 4.3). |
| Indicator light not functioning. | Unit is off; Battery completely drained; Malfunction. | Turn on the unit; Charge the unit; Contact customer support if problem persists. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | AIKE |
| Model Number | AK1333 |
| Colour | Matte Black |
| Product Dimensions | 12 x 8 x 19 cm (4.7 x 3.1 x 7.5 inches) |
| Material | Stainless Steel |
| Item Weight | 590 g (1.3 lbs) |
| Capacity | Approx. 9.5 oz (280 ml) |
| Power Source | Rechargeable Lithium-ion Battery (Type-C) |
Figure 7.1: Key dimensions of the AIKE Automatic Sensor Liquid Soap Dispenser.
8. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official AIKE website. If you encounter any issues not covered in this manual, please contact AIKE customer service for assistance.
Manufacturer: Zhejiang AIKE Appliances Co., Ltd.
