Mifaso Power Strip Surge Protector (Model MFS8U5F) Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective operation of your Mifaso Power Strip Surge Protector, Model MFS8U5F. This device is designed to expand your power outlets and protect your electronic devices from power surges and overloads.

Important Safety Information

• Do not exceed the electrical ratings of this power strip. Refer to the specifications section for details.
• Do not use in wet environments or near water.
• This device is for indoor use only.
• Do not disassemble or modify the power strip.
• Keep out of reach of children.
• Ensure the power cord is fully inserted into a grounded wall outlet.
• Avoid running the power cord under carpets or rugs.

Product Features

The Mifaso Power Strip Surge Protector offers a range of features for convenient and safe power distribution:

• 12-in-1 Power Solution: Equipped with 8 AC outlets and 4 USB ports (2 USB-C, 2 USB-A) to power multiple devices simultaneously.
• Wide-Spaced Outlets: The 3-sided design with 2-inch spacing between AC outlets accommodates larger power adapters without blocking adjacent ports.
• Surge Protection (900 Joules): Protects connected devices from voltage spikes and surges.
• Overload Protection: An integrated circuit breaker with a reset/off switch automatically trips to prevent damage from power overloads.
• Flat Plug Design: The low-profile flat plug allows furniture to be placed closer to the wall, saving space.
• Wall Mountable: Features keyhole slots on the back for secure mounting on walls or desks.
• 5FT Heavy Duty Extension Cord: UL-approved pure copper cord ensures reliable power delivery.
• USB Charging: USB-C ports provide up to 5V/3A Max, and USB-A ports provide up to 5V/2.4A Max.

Image: The Mifaso Power Strip Surge Protector, showing its compact design and multiple outlets.

Image: A top-down view of the power strip with various devices plugged into its AC and USB ports, illustrating its "One for All" capability.

Setup Instructions

1. Placement

Choose a suitable location for your power strip. The 5-foot extension cord provides flexibility. The flat plug design allows it to be placed behind furniture without obstruction.

Image: The flat plug design of the power strip, demonstrating how it fits flush against a wall behind furniture.

2. Wall Mounting (Optional)

If desired, the power strip can be mounted to a wall or desk using the two keyhole slots on the back. Ensure appropriate screws or mounting hardware (not included) are used for secure installation.

Image: The power strip mounted to a wall, highlighting the keyhole slots for installation.

3. Connecting to Power

Plug the power strip's 5FT heavy-duty cord into a standard 125V grounded wall outlet.

Image: The 5FT extension cord of the power strip, illustrating its length for flexible placement.

4. Connecting Devices

Plug your electronic devices into the available AC outlets and USB ports. The wide-spaced outlets are designed to accommodate larger power adapters.

Image: Close-up of the USB-A and USB-C ports, indicating their maximum output for charging various devices.

Operating Instructions

Power On/Off Switch

The power strip features a combined reset/off switch. Press the switch to turn the power strip on or off. When the power strip is on, a green "SURGE PROTECTED" indicator light will illuminate, confirming active surge protection.

Image: The power strip showing the illuminated green "SURGE PROTECTED" indicator light.

Surge and Overload Protection

The power strip is equipped with 900 Joules of surge protection to safeguard your electronics from sudden voltage fluctuations. In case of an electrical overload, the integrated circuit breaker will automatically trip, cutting power to connected devices to prevent damage. To reset the overload protection, unplug some devices, then press the reset/off switch to restore power.

Image: A diagram illustrating the 900J Surge Protection and Overload Protection features of the power strip.

Maintenance

• Ensure the power strip is unplugged before cleaning.
• Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Regularly check the power cord for any signs of damage. If damaged, discontinue use and replace the unit.

Troubleshooting

No Power to Devices

• Check if the power strip's reset/off switch is in the "ON" position.
• Verify that the power strip is securely plugged into a working wall outlet.
• If the overload protection has tripped, unplug some devices and press the reset/off switch to restore power.
• Ensure the connected devices are properly plugged into the power strip and are functioning correctly.

USB Ports Not Charging

• Confirm the power strip is receiving power (green indicator light is on).
• Ensure your USB cable is not damaged and is securely connected to both the power strip and your device.
• Some devices may require specific charging rates. While the USB ports offer standard outputs, check your device's charging requirements.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Mifaso website. Keep your purchase receipt for warranty claims.

You can visit the Mifaso Store for more products and information: Mifaso Store on Amazon.

Product Videos