Shark WS630/WS632

Shark WANDVAC System WS630/WS632 Cordless 3-in-1 Stick Vacuum User Manual

Model: WS630, WS632

Introduction

Welcome to the Shark WANDVAC System WS630/WS632 user manual. This guide provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ultra-lightweight cordless 3-in-1 stick vacuum. The Shark WANDVAC System is designed for versatile cleaning, offering powerful suction in a compact and adaptable design.

Shark WANDVAC System WS630/WS632 in full stick vacuum mode

Figure 1: The Shark WANDVAC System WS630/WS632 in its full stick vacuum configuration.

Important Safety Instructions

Please read all instructions carefully before using your Shark WANDVAC System. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always unplug the charger from the electrical outlet when not in use and before cleaning.
  • Do not use outdoors or on wet surfaces.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Use only as described in this manual. Use only manufacturer's recommended attachments.
  • Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
  • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
  • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
  • Do not handle plug or appliance with wet hands.
  • Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
  • Do not pick up toxic material (e.g., chlorine bleach, ammonia, drain cleaner).
  • Do not use without dust cup and/or filters in place.
  • Use only on dry, indoor surfaces.
  • Exercise extra care when cleaning on stairs.
  • Store the appliance indoors. Put away after use to prevent accidents.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

What's Included

Your Shark WANDVAC System WS630/WS632 package includes the following components:

  • Shark WANDVAC Handheld Vacuum
  • Wand
  • PowerFins Floor Nozzle
  • Charging Dock
  • Battery
  • Crevice Tool
Diagram showing Shark WANDVAC System components: handheld vacuum, wand, floor nozzle, charging dock, and accessories

Figure 2: Exploded view of the Shark WANDVAC System components, including the handheld unit, wand, floor nozzle, and charging dock.

Setup and Assembly

Follow these steps to assemble your Shark WANDVAC System and prepare it for first use.

  1. Assemble the Vacuum:
    • Insert the wand into the PowerFins Floor Nozzle until it clicks securely into place.
    • Insert the handheld vacuum into the top of the wand until it clicks securely into place.
  2. Charge the Battery:
    • Place the assembled vacuum onto the charging dock. Ensure the contacts align.
    • Plug the charging dock into a standard electrical outlet.
    • The battery indicator lights on the handheld unit will illuminate to show charging status. Allow for a full charge before first use.
Shark WANDVAC System charging on its low-profile dock in a kitchen setting

Figure 3: The Shark WANDVAC System docked for charging, ready for use.

Operating Your Vacuum

The Shark WANDVAC System offers versatile cleaning modes for various tasks.

Power On/Off and Suction Modes

  • To turn on the vacuum, press the power button located on the handheld unit.
  • The vacuum operates with Hypervelocity accelerated suction power for efficient cleaning.
  • For tougher messes, press the Boost button to activate extra bursts of strong suction.

One-Touch Transitions (3-in-1 Functionality)

Easily switch between cleaning modes with a single touch:

  1. Full Stick Vacuum Mode: For floor cleaning, use the vacuum fully assembled with the wand and PowerFins floor nozzle. The PowerFins technology ensures continuous contact with surfaces, digging deep into carpets and directly engaging hard floors.
  2. Handheld Vacuum Mode: Detach the handheld unit from the wand for quick clean-ups on furniture, stairs, or in your car.
  3. Extended Reach Mode: Detach the handheld unit from the wand and attach it directly to the PowerFins floor nozzle, or use the wand with an accessory tool for cleaning high or hard-to-reach areas.
Woman demonstrating one-touch transition from stick vacuum to handheld vacuum

Figure 4: Demonstrating the one-touch transition feature, allowing quick conversion between cleaning modes.

Handheld vacuum cleaning popcorn from a sofa with a child nearby

Figure 5: The handheld vacuum mode is ideal for cleaning upholstery and small spills.

Man using extended wand to vacuum stairs, woman using extended wand to clean ceiling

Figure 6: The extended reach feature allows for cleaning high areas and stairs effectively.

Maintenance

Regular maintenance ensures optimal performance of your Shark WANDVAC System.

Emptying the Dust Cup

Empty the dust cup after each use or when debris reaches the MAX fill line.

  1. Ensure the handheld vacuum is turned off.
  2. Hold the handheld vacuum over a trash bin.
  3. Press the One-Touch Hygienic Empty button to release the dust cup contents.
  4. Close the dust cup lid securely until it clicks.
Woman emptying the dust cup of the handheld Shark WANDVAC into a trash bin

Figure 7: The one-touch hygienic empty feature allows for quick and mess-free disposal of debris.

Cleaning the Filters

The vacuum uses a foam filter. Rinse filters regularly to maintain suction power. Refer to the full manual for specific filter removal and cleaning instructions.

  • Rinse filters with cold water only.
  • Allow filters to air-dry completely for at least 24 hours before reinstalling.
  • Do not operate the vacuum with wet filters.

Brushroll Maintenance

The PowerFins floor nozzle features a self-cleaning brushroll designed to prevent hair wrap. Periodically check the brushroll for any debris or blockages.

Woman using handheld vacuum to clean pet hair from a pet bed

Figure 8: The vacuum is effective at picking up pet hair, and the self-cleaning brushroll helps manage hair wrap.

Troubleshooting

If you encounter issues with your Shark WANDVAC System, refer to the table below for common problems and solutions.

ProblemPossible CauseSolution
Vacuum not turning on.Battery is not charged or not properly inserted.Ensure the battery is fully charged and correctly seated in the handheld unit. Check if the charging dock is plugged in.
Loss of suction.Dust cup is full; filters are dirty; blockage in nozzle, wand, or hose.Empty the dust cup. Clean and dry the foam filter. Check for and clear any blockages.
Brushroll not spinning.Blockage in the brushroll; floor nozzle not properly connected.Turn off the vacuum and remove any obstructions from the brushroll. Ensure the floor nozzle is securely attached to the wand.
Vacuum shuts off automatically.Overheating due to blockage or dirty filters; low battery.Check for and clear blockages. Clean filters. Allow the vacuum to cool down for at least 45 minutes. Recharge the battery.

Specifications

FeatureDetail
BrandShark
Model NumbersWS630, WS632
TypeCordless 3-in-1 Stick Vacuum
Power SourceBattery Powered
Voltage120 Volts
Special FeaturesLightweight, Hypervelocity Motor, PowerFins Technology, One-Touch Hygienic Empty, Power Boost
Filter TypeFoam
Surface RecommendationCarpet, Hard Floors
Noise Level80 Decibels
Included ComponentsBattery, Crevice Tool (additional accessories may vary by model)
Control MethodTouch, Push Button

Warranty & Support

Manufacturer Warranty

This product comes with a 90 days limited warranty from the manufacturer. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal household use.

For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official Shark website.

Customer Support

For technical assistance, replacement parts, or any questions regarding your Shark WANDVAC System, please contact Shark customer service.

  • Website: Visit www.sharkclean.com for FAQs, support articles, and contact information.
  • Phone: Refer to your product packaging or the Shark website for the most current customer service phone number.

© 2023 SharkNinja Operating LLC. All rights reserved. Shark is a registered trademark of SharkNinja Operating LLC.