Wasserstein Horizontal Adjustable Mount for Google Nest Doorbell (Wired, 2nd Gen) - Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Wasserstein Horizontal Adjustable Mount, specifically designed for the Google Nest Doorbell (Wired, 2nd Gen). This mount enhances your doorbell's viewing angles and is built for outdoor durability.

The Wasserstein Horizontal Adjustable Mount shown with a Google Nest Doorbell (Wired, 2nd Gen) installed, demonstrating its compact design.

Compatibility

This mount is exclusively compatible with the Google Nest Doorbell (Wired, 2nd Gen). It is not designed for the Google Nest Doorbell (Battery Version) or the Google Nest Hello Doorbell.

A visual guide confirming compatibility with the Google Nest Doorbell (Wired, 2nd Gen) and explicitly showing incompatibility with the battery version and Nest Hello Doorbell.

Package Contents

Please refer to your product packaging for a complete list of included items. Typically, the package contains:

• Wasserstein Horizontal Adjustable Mount
• Mounting Screws and Wall Anchors
• Small Screwdriver (for angle adjustment)
• Instruction Manual

Setup and Installation

The Wasserstein Horizontal Adjustable Mount is designed for hassle-free installation. Follow these steps to securely mount your Google Nest Doorbell (Wired, 2nd Gen):

1. Prepare the Mounting Surface: Ensure the surface where you intend to install the mount is clean and suitable for drilling.
2. Mark Drilling Points: Hold the mount against the wall at your desired installation height and mark the screw holes.
3. Drill Pilot Holes: Drill pilot holes at the marked points. Insert wall anchors if mounting into drywall or masonry.
4. Attach the Mount: Secure the Wasserstein mount to the wall using the provided screws.
5. Attach Doorbell Base: Connect the Google Nest Doorbell (Wired, 2nd Gen) base plate to the Wasserstein mount. The components are designed to fit smoothly.
6. Secure Doorbell: Mount your Google Nest Doorbell (Wired, 2nd Gen) onto its base plate, ensuring it clicks securely into place.

The image depicts the straightforward installation process of the mount, requiring basic tools to secure it to the mounting surface.

Operating Instructions: Adjusting the Viewing Angle

The primary function of this mount is to provide an adjustable horizontal viewing angle for your doorbell. This allows you to optimize the camera's field of view to cover your desired area, such as your porch or pathway.

1. Identify Adjustment Screws: Locate the small adjustment screws on the side of the mount. A magnetic screwdriver is recommended due to their size.
2. Loosen Screws: Gently loosen the adjustment screws. Do not remove them completely.
3. Adjust Angle: Carefully pivot the doorbell and mount assembly to achieve your desired horizontal angle. The mount allows for adjustment between 35° and 55°.
4. Tighten Screws: Once the desired angle is set, securely tighten the adjustment screws to lock the mount in position.

This image illustrates the horizontal adjustment capability of the mount, allowing for angles between 35 and 55 degrees to optimize the doorbell's field of view.

This image highlights how the adjustable mount enhances the doorbell's viewing angle, capturing a broader perspective of the entrance area and approaching individuals.

Maintenance

The Wasserstein Horizontal Adjustable Mount is constructed from rugged materials designed to withstand various outdoor weather conditions, including wind and rain. Minimal maintenance is required:

• Cleaning: Periodically wipe the mount with a damp cloth to remove dust and dirt. Avoid abrasive cleaners.
• Inspection: Occasionally check that all screws are tight and the mount remains securely fastened to the wall.

This image shows the mount and doorbell enduring outdoor conditions, emphasizing the product's durable, weatherproof construction suitable for various environments.

Troubleshooting

• Mount feels loose: Ensure all mounting screws securing the bracket to the wall are tightened. If the doorbell itself feels loose on the mount, ensure it is properly clicked into its base.
• Difficulty adjusting angle: Loosen the adjustment screws sufficiently before attempting to change the angle. Do not force the adjustment. If screws are too small, use a magnetic screwdriver.
• Incorrect doorbell model: Verify that your doorbell is the Google Nest Doorbell (Wired, 2nd Gen). This mount is not compatible with battery versions or Nest Hello. Refer to the compatibility section.

Specifications

Warranty and Support

For warranty information or technical support, please contact Wasserstein directly through their official website or the retailer where the product was purchased. Keep your proof of purchase for warranty claims.

You can visit the official Wasserstein store for more products and support: Wasserstein Store