Important Safety Instructions
Please read all instructions before using your Shark FlexStyle Air Styling & Drying System to ensure safe and effective operation. Keep this manual for future reference.
General Safety
- Never leave the appliance unattended when plugged in.
- Do not use this appliance near water, such as bathtubs, showers, basins, or other vessels containing water.
- Always unplug the appliance immediately after use.
- Do not use the appliance with wet hands.
- Keep the appliance away from heated surfaces.
- Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting the appliance.
- Do not use attachments other than those provided by the manufacturer.
- Regularly inspect the cord for damage. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
Product Overview
Components
The Shark FlexStyle Air Styling & Drying System is a versatile tool designed for various hair types and styling needs. It features a powerful main unit that transforms from a hair dryer to a multi-styler with a simple twist, along with several interchangeable attachments.
Image: The Shark FlexStyle main unit shown with its array of styling attachments, including auto-wrap curlers, brushes, and a concentrator.
- Main Unit: The core device, functioning as both a hair dryer and a styling wand.
- 1.25" Auto-Wrap Curlers: Two curlers (left and right) that use Coanda Technology to automatically wrap and curl hair.
- Curl-Defining Diffuser: Features extendable prongs for fast, even drying of curly and coily hair from root to tip.
- Oval Brush: Designed to detangle, smooth, and add shine and volume to hair.
- Styling Concentrator: Directs airflow for sleek, smooth hair and features a rotatable nozzle for rough drying or voluminous blowouts.
- Paddle Brush: Uses nylon and boar bristles to create tension for smoothing and straightening hair.
Setup
Attaching Accessories
- Ensure the main unit is unplugged and cool before attaching or detaching accessories.
- To attach an accessory, align the accessory with the main unit's nozzle. Push firmly until it clicks into place.
- To detach an accessory, press the release button located on the main unit and gently pull the accessory away.
Image: A hand holding the Shark FlexStyle main unit, demonstrating its compact, folded position for storage or use as a hair dryer.
The main unit can be rotated from a straight styling wand to a 90-degree angle for use as a hair dryer. To rotate, press the button on the side of the unit and pivot the head.
Video: This video demonstrates how to switch the Shark FlexStyle from its straight styling wand configuration to the 90-degree hair dryer position by pressing a button and rotating the head.
Operating Instructions
Power and Settings
- Plug the unit into a suitable power outlet.
- Press the power button to turn the unit on.
- Use the temperature and airflow buttons to select your desired settings. The unit offers multiple heat and speed settings.
- Press and hold the cool shot button for a burst of cool air to set your style.
Video: This video provides an overview of the Shark FlexStyle's controls, including power, heat settings, speed settings, and the cool shot function.
Using the Hair Dryer Function
- Ensure the main unit is in the 90-degree hair dryer position.
- Select your desired heat and speed settings.
- Direct the airflow towards your hair, moving the dryer continuously to avoid concentrating heat in one area.
- For faster drying, rough dry your hair until it is about 80% dry before using styling attachments.
Image: A woman is shown using the Shark FlexStyle in its hair dryer configuration to dry her hair.
Using the Auto-Wrap Curlers
- Attach the appropriate auto-wrap curler (left or right, indicated by arrows on the barrel) to the styling wand.
- Take a small section of damp hair.
- Hold the curler vertically near the ends of your hair. The Coanda effect will automatically wrap your hair around the barrel.
- Hold for 10-15 seconds, then use the cool shot to set the curl.
- Release the hair by pulling the curler downwards.
Image: A woman demonstrates using the auto-wrap curlers of the Shark FlexStyle, with hair automatically wrapping around the barrel.
Video: This video showcases the auto-wrap curlers in action, demonstrating how hair is effortlessly wrapped and curled by the Shark FlexStyle.
Using the Oval Brush
- Attach the oval brush to the styling wand.
- Work with damp, towel-dried hair.
- Section your hair and place the brush near the roots.
- Brush downwards, rotating the brush to create volume and smooth strands.
Image: A woman uses the oval brush attachment of the Shark FlexStyle to add volume and smooth her hair.
Using the Curl-Defining Diffuser
- Attach the curl-defining diffuser to the styling wand.
- Gently place sections of damp, curly hair into the diffuser bowl.
- Use a low heat and speed setting to dry your curls, minimizing frizz and enhancing definition.
- The extendable prongs can be used to reach the roots for even drying.
Image: A woman uses the curl-defining diffuser attachment of the Shark FlexStyle to dry and define her curly hair.
Using the Styling Concentrator
- Attach the styling concentrator to the styling wand.
- Use with a brush (not included) to direct airflow for precise styling, smoothing, or creating voluminous blowouts.
- The nozzle can be rotated to adjust the direction of the airflow.
Image: A woman uses the styling concentrator attachment of the Shark FlexStyle to achieve sleek, smooth hair.
Maintenance
Cleaning the Unit
- Always unplug the appliance and allow it to cool completely before cleaning.
- Wipe the main unit and attachments with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Regularly clean the air intake filter located at the bottom of the main unit to prevent blockages and maintain performance. Twist and pull to remove the filter cover, clean any lint or hair, and reattach.
Storage
- Store the appliance and its attachments in a cool, dry place.
- Do not wrap the power cord around the appliance, as this can cause damage.
- Keep the appliance out of reach of children.
Troubleshooting
| Problem | Solution |
|---|---|
| Unit does not turn on. | Check if the power cord is securely plugged into a working outlet. Ensure the power button is pressed firmly. |
| Attachments are not staying on. | Ensure the attachment is aligned correctly and pushed firmly until it clicks into place. Check for any debris obstructing the connection. |
| Hair is not wrapping around the curlers. | Ensure hair is damp (not soaking wet or completely dry). Use smaller sections of hair. Check that the curler is oriented correctly for the desired curl direction (left/right). |
| Unit is overheating or shutting off. | Clean the air intake filter to ensure proper airflow. Allow the unit to cool down before resuming use. If the issue persists, contact customer support. |
Specifications
| Feature | Value |
|---|---|
| Model Number | HD435 |
| Product Dimensions | 1.8 x 1.8 x 13.5 inches |
| Weight | 4.72 Pounds (approx. 1.5 lbs for main unit) |
| Power Source | Corded Electric |
| Wattage | 1600 watts |
| Material | Metal, Plastic |
| Color | Stone |
| UPC | 622356601900 |
Warranty and Support
Warranty Information
Your Shark FlexStyle Air Styling & Drying System is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including duration and coverage details. Keep your proof of purchase for warranty claims.
Customer Support
For any questions, troubleshooting assistance, or to register your product, please visit the official Shark website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
