Introduction
This instruction manual provides detailed guidance for assembling your Metal Earth Premium Series B-2A Spirit Stealth Bomber 3D Metal Model Kit. This kit allows you to construct a highly detailed replica of the B-2A Spirit Stealth Bomber from precision-etched steel sheets. No glue or solder is required for assembly.
The B-2A Spirit, also known as the Stealth Bomber, is an American heavy strategic bomber featuring stealth technology designed for penetrating dense anti-aircraft defenses.
Safety Information
Warning: This product contains small parts and sharp edges. Use caution, especially when assembling with or around young children. Keep all components out of reach of small children to prevent choking hazards. Adult supervision is recommended for users under 14 years of age.
Package Contents
- One (1) 8.3" x 4.3" Metal Sheet with model parts
- Illustrated Instructions
- One (1) Pair of Tweezers (included in bundle)
Image: The Metal Earth B-2A Spirit Stealth Bomber kit packaging, displaying the metal sheet, printed instructions, and a visual of the completed model.
Assembly Instructions
Follow these steps carefully to assemble your B-2A Spirit Stealth Bomber model. Refer to the included illustrated instructions for detailed diagrams.
Tools Required
- Tweezers: Essential for bending and twisting connection tabs. A pair is included with this bundle.
- Wire Cutters (Optional but Recommended): For easily clipping parts from the metal sheets.
- Needle Nose Pliers (Optional): Can assist with intricate bends.
Image: Recommended tools for assembly, including clippers, flat nose pliers, needle nose pliers, and tweezers.
General Assembly Tips
- No Glue or Solder Needed: Parts connect using tabs and corresponding holes.
- Clipping Parts: Carefully clip each part from the metal sheet. Avoid bending or damaging adjacent parts.
- Bending Tabs: Tabs are designed to be bent and twisted to secure connections. Use tweezers for precision.
- Folding Lines: Parts often have etched lines indicating where to fold. Bend along these lines to create the 3D shape.
- Reference Model: It is highly recommended to view the completed model online for reference. A 360-degree view is available at metalearth.com/360/ICX113.
Step-by-Step Process
- Prepare the Parts: Carefully identify and clip out the required parts from the metal sheet. There are 11 metal pieces in total.
Image: Transformation from flat metal sheet to 3D model, highlighting the 11 metal pieces.
Image: Hands clipping a part from the metal sheet.
- Form the Shapes: Bend and fold the metal pieces according to the illustrated instructions. Pay attention to the etched lines for precise folds.
Image: A metal piece being bent and folded to create its intended shape.
- Connect Parts: Insert the tabs into the corresponding holes.
Image: A tab being inserted into a hole for connection.
- Secure Connections: Once a tab is inserted, bend or twist it to secure the connection. Use tweezers for a firm and neat finish.
Image: A tab being bent to secure the connection between two metal pieces.
- Continue Assembly: Follow the numbered steps and diagrams in the provided instruction sheet to complete the model.
Image: A partially assembled B-2A Spirit model on a wooden surface, with assembly tools nearby.
Image: The fully assembled Metal Earth B-2A Spirit Stealth Bomber model.
Displaying Your Model
Once assembled, your Metal Earth B-2A Spirit Stealth Bomber model is ready for display. Place it on a stable, flat surface away from direct sunlight and excessive moisture to preserve its appearance. The model includes a small stand for optimal presentation.
Image: Front-top view of the assembled B-2A Spirit model.
Image: Side-top view of the assembled B-2A Spirit model.
Image: Rear-top view of the assembled B-2A Spirit model.
Image: Front-low view of the assembled B-2A Spirit model.
Maintenance
To maintain the appearance of your Metal Earth model, periodically dust it gently with a soft, dry cloth or a soft brush. Avoid using abrasive cleaners or harsh chemicals, as these can damage the metal finish. Keep the model away from liquids.
Troubleshooting
- Difficulty Clipping Parts: If parts are hard to detach, use a pair of small wire cutters for a cleaner break. Be careful not to bend the part itself.
- Tabs Breaking: Tabs are delicate. If a tab breaks, you may attempt to secure the connection with a tiny drop of super glue, though this is generally not recommended for Metal Earth models. Handle tabs gently.
- Parts Not Fitting: Ensure you are using the correct parts for each step and that all bends are precise. Refer to the illustrated instructions and the 360-degree online model for visual guidance.
- Model Instability: Double-check all tab connections to ensure they are securely bent or twisted. A loose connection can affect the model's stability.
Specifications
| Feature | Detail |
|---|---|
| Brand | Metal Earth |
| Model Name | B-2A Spirit |
| Item Model Number | ICX113-T |
| Material | Steel |
| Assembled Dimensions (L x W x H) | 5.91 x 2.36 x 1.57 inches |
| Number of Pieces | 1 (sheet, containing 11 parts) |
| Recommended Age Range | 14 years and up |
| Special Feature | Premium Series, No Glue or Solder Required |
| Included Components | Metal Sheet, Illustrated Instructions, Tweezers |
Warranty Information
Metal Earth products are designed for quality and precision. Due to the nature of model kits, individual parts are not typically covered by a direct warranty once removed from the sheet. However, if you receive a kit with manufacturing defects or missing components, please contact the manufacturer directly for assistance. Keep your proof of purchase.
Support
For additional support, assembly tips, or to view other models, please visit the official Metal Earth website or contact Fascinations, the manufacturer.
- Official Website: www.fascinations.com
- 360-Degree Model View: metalearth.com/360/ICX113
- Manufacturer: Fascinations, Seattle WA