1. Introduction
The Briloner LED Ceiling Light (Model 3679-018) is a versatile lighting solution designed for bathrooms and other indoor spaces. It features a unique glitter effect created by laser-perforated optics in a chrome frame. This light offers RGB color control, dimmable CCT (Correlated Color Temperature) from 3000K (warm white) to 6500K (cool white), and an IP44 splash-proof rating, making it suitable for damp environments. This manual provides essential information for safe installation, operation, and maintenance of your new LED ceiling light.
Image: The Briloner LED Ceiling Light 3679-018, showcasing its main features including white light change (3000K-6500K), color change (RGB), and IP44 splash protection.
2. Safety Instructions
- Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician or a competent person if you are unsure about electrical wiring.
- Ensure the mounting surface is structurally sound and capable of supporting the weight of the light fixture.
- This product is rated IP44, providing protection against solid objects larger than 1mm and splashing water from any direction. Do not immerse the fixture in water.
- Do not attempt to modify or disassemble the light fixture beyond what is described in this manual. Unauthorized modifications may void the warranty and pose safety risks.
- Keep the remote control and batteries out of reach of children.
3. Package Contents
Please check that all components are present and undamaged before installation:
- 1x Briloner LED Ceiling Light (Model 3679-018)
- 1x Remote Control (requires 2x AAA batteries, included)
- Mounting hardware (screws, wall plugs)
- 1x Instruction Manual
4. Setup and Installation
Follow these steps carefully to install your Briloner LED Ceiling Light:
- Prepare for Installation: Turn off the main power supply to the installation area at the circuit breaker. Ensure the power is completely off before proceeding.
- Mark Drilling Points: Use the light fixture's mounting bracket as a template. Hold it against the ceiling at the desired installation location and mark the drilling points with a pencil.
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for your ceiling material. Insert the provided wall plugs into the drilled holes.
- Electrical Connection: Connect the electrical wires from your ceiling to the terminals on the light fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Secure all connections tightly.
- Mount the Fixture: Attach the light fixture to the ceiling using the provided screws, securing it firmly to the wall plugs.
- Restore Power: Once the fixture is securely mounted and all connections are checked, restore power at the main circuit breaker.
Image: Dimensional diagram of the Briloner LED Ceiling Light, showing a diameter of 355mm and a height of 65mm, crucial for planning installation.
5. Operating Instructions
Your Briloner LED Ceiling Light is controlled using the included remote control. Ensure the remote has 2x AAA batteries installed correctly.
Image: Detailed view of the remote control for the Briloner LED Ceiling Light, with labels indicating functions such as Nightlight, On/Off (CCT/RGB), Dim Up/Down, Color Temperature Adaptation, Light Effects (Flash/Smooth), and Timer.
- Power On/Off: Press the ON/OFF button (labeled CCT or RGB) to turn the light on or off.
- White Light (CCT) Mode: Press the CW button to activate white light mode. Use the sun/snowflake icons or the dedicated Color Temperature Adaptation buttons to adjust the white light from 3000K (warm white) to 6500K (cool white).
Image: The light demonstrating its ability to produce Warm White, Neutral White, and Cool White light, along with stepless dimming capability.
- RGB Color Mode: Press the RGB button to switch to RGB color mode. Use the color wheel or specific color buttons on the remote to select your desired color.
Image: The light showcasing selectable color programs and various light effects in RGB mode.
- Dimming: Use the Dim Up and Dim Down buttons to adjust the brightness of the light in both CCT and RGB modes.
- Memory Function: The light features a memory function, retaining the last used brightness, color temperature, or RGB color setting when turned off and on again.
Image: The light illustrating its Dimmable, Memory Function, and Night Light Function capabilities.
- Night Light Function: Press the Nightlight function button to activate a low-intensity, soft illumination suitable for nighttime use.
- Light Effects: Use the Flash or Smooth buttons for dynamic light effects.
- Timer: The Timer button allows you to set a timed shutdown for the light.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your LED ceiling light.
- Cleaning: Ensure the power supply is disconnected before cleaning. Clean the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- Battery Replacement: If the remote control's range decreases or it becomes unresponsive, replace the 2x AAA batteries. Ensure new batteries are inserted with correct polarity.
- LEDs: The integrated LED light source is designed for long-term use and is not user-replaceable.
7. Troubleshooting
If you encounter any issues with your Briloner LED Ceiling Light, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Remote control batteries are dead. Loose electrical connection. | Check the main circuit breaker. Replace the 2x AAA batteries in the remote control. Ensure all electrical connections are secure (with power off). |
| Remote control is unresponsive. | Dead batteries. Obstruction between remote and light. Remote not paired (unlikely for this model, but possible). | Replace remote control batteries. Ensure a clear line of sight to the light fixture. If issues persist, contact customer support. |
| Light flickers or dims unexpectedly. | Unstable power supply. Loose electrical connection. | Consult an electrician to check your home's electrical system. Verify all electrical connections are tight (with power off). |
| Incorrect color or brightness setting. | Accidental remote input. Temporary software glitch. | Re-select desired settings using the remote control. Turn the light off at the switch for 10 seconds, then turn it back on. |
8. Specifications
- Model Number: 3679-018
- Dimensions (DxH): 355 x 65 mm (13.98 x 2.56 inches)
- Power Consumption: 18 Watts
- Lumen Output: 1,850 lumens
- Color Temperature (CCT): 3000K (Warm White) - 6500K (Cool White), Dimmable
- Color Options: RGB (Red, Green, Blue)
- Protection Class: IP44 (Splash-proof)
- Material: Metal, Plastic
- Power Source: AC
- Remote Control Batteries: 2x AAA (included)
- Manufacturer: Briloner Leuchten GmbH & Co. KG
- Country of Origin: China
Image: The Briloner LED Ceiling Light installed in a contemporary bathroom, demonstrating its suitability for damp environments and its aesthetic integration.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Briloner LED Ceiling Light, please contact Briloner Leuchten GmbH & Co. KG directly or visit their official website. You can also find more information on their Amazon Brand Store: Briloner Amazon Store.
