FeeTUO Soft Roll-Up Tonneau Cover User Manual

1. Introduction and Compatibility

This manual provides instructions for the FeeTUO Soft Roll-Up Tonneau Cover, Model FER096. This product is designed to protect your truck bed cargo from weather elements and enhance security.

Compatibility: This tonneau cover is compatible with 2022, 2023, 2024, and 2025 Toyota Tundra models with a Fleetside 5.5FT (66.7") Bed. It is suitable for models both with and without the Deck Rail System. Please note: This cover is not compatible with Roll Bar or Trail Edition models.

Before installation, measure the inside length of your truck bed to ensure correct model fitment.

Image: FeeTUO Soft Roll-Up Tonneau Cover securely installed on a truck bed, providing a sleek and covered appearance.

Image: A diagram showing different truck bed lengths (5.6 FT, 6.7 FT, 8.0 FT) and indicating the correct fit for this model (5.6 FT).

Image: Illustrations depicting truck beds with accessories such as headache racks, tool boxes, rollbars, and badrails, indicating that the tonneau cover is not compatible with these configurations.

2. Components (What's in the Box)

Your FeeTUO Soft Roll-Up Tonneau Cover package includes the following components:

• A Soft Roll-Up Tonneau Cover assembly
• Pre-treated 16 Ga. aluminum rails and horizontal crossbars
• Mounting clamps
• Seal strip (118 inches)
• LED lamp
• Installation instructions and hardware

Image: Detailed views of the tonneau cover's key components, such as the front clamp for double safety, safety fastening, the latching system, durable aluminum frames, the quick open device, and the weathertight surface.

3. Setup and Installation

Installation of the FeeTUO Soft Roll-Up Tonneau Cover is designed to be straightforward and typically takes about 20-30 minutes, requiring no drilling.

Installation Steps:

1. Prepare the Truck Bed: Ensure your truck bed is clean and free of debris. If there are any gaps at the bulkhead (front of the truck bed) or tailgate side, please install the provided seal strip to ensure a watertight seal.
2. Position the Cover: First, place the rolled-up tonneau cover assembly onto the bulkhead of your truck bed.
3. Release Safety Bungee Cords: Release the safety bungee cords that secure the rolled cover.
4. Attach Side Rails: Attach the side rails to the cover assembly. Ensure they are properly aligned along the truck bed rails.
5. Tighten Screws: Secure the side rails by tightening the necessary screws.
6. Install Mounting Clamps: Place the mounting clamps evenly along the rail sides, securing the cover to the truck bed.
7. Tighten Clamps: Tighten all mounting clamps to ensure the cover is firmly attached and stable.

Image: A detailed view of the front clamp and safety fastening, highlighting the secure attachment points of the tonneau cover to the truck bed.

4. Operating Instructions

Closing the Cover:

1. Unroll the tonneau cover evenly across the truck bed.
2. Ensure the locking tongues at the rear of the cover are properly engaged with the locking bases on the tailgate side.
3. Finally, close the tailgate of your truck. The cover is designed to allow the tailgate to close securely underneath it.

Opening and Rolling Up the Cover:

1. Unlock Tailgate: Begin by unlocking your truck's tailgate.
2. Release Latch: The cover can be easily unlatched by pulling the strap located underneath the cover near the tailgate. This releases the locking tongues.
3. Roll Up Cover: Once unlatched, gently roll the cover towards the bulkhead of the truck bed.
4. Secure with Bungee Cords: Attach the bungee cords to secure the rolled-up cover, allowing full access to the truck bed.

Image: A visual guide demonstrating the three steps to easily roll up the soft tonneau cover, providing full access to the truck bed.

Image: The truck bed with the tonneau cover rolled up, showcasing the included LED light illuminating the cargo area, which includes hunting decoys and a dog.

5. Maintenance

To ensure the longevity and optimal performance of your FeeTUO Soft Roll-Up Tonneau Cover, follow these maintenance guidelines:

• Cleaning: The marine-grade dual-coated vinyl top is designed for easy cleaning. Use mild soap and water to clean the surface. Avoid harsh chemicals or abrasive cleaners that could damage the vinyl.
• Weather Protection: The cover is designed to withstand heavy snow loads and is weathertight, preventing water ingress. Regularly check the seal strip and ensure it is free from debris to maintain its effectiveness.
• Material Quality: The cover features a spray-coating PVDF self-cleaning varnish, which helps maintain its appearance by repelling pollutants and water.
• Frame Inspection: Periodically inspect the electrophoretic painted aluminum frame for any signs of damage or loose connections. The robust frame is built to support over 200 pounds.

Image: Icons and imagery illustrating the tonneau cover's resistance to UV rays, rain, snow, and wind, emphasizing its all-weather protection capabilities.

Image: A comparison highlighting the superior self-cleaning effect of FeeTUO's PVDF spray-coating varnish, which keeps the surface clean from pollutants and water, contrasted with a less effective material.

6. Troubleshooting

If you encounter any issues with your tonneau cover, consider the following common troubleshooting tips:

• Water Leakage: If you notice water in the truck bed, first check the seal strip at the bulkhead and tailgate. Ensure it is properly installed and free of gaps or damage. Also, verify that the cover is fully closed and the locking tongues are securely engaged.
• Cover Not Latching Securely: Check that the side rails are properly aligned and that all mounting clamps are tightened. Ensure no obstructions are preventing the locking tongues from engaging with the bases.
• Difficulty Rolling/Unrolling: Ensure the side rails are clean and free of debris that might impede smooth operation. Check that the cover is not misaligned on the rails.
• Fitment Issues: Double-check the compatibility information in Section 1 to ensure the cover is the correct size for your specific Tundra model and bed length. Confirm that no incompatible accessories (like headache racks or roll bars) are installed.

For further assistance, please refer to the contact information in the Support section.

7. Specifications

8. Warranty and Support

Return Policy: This product is eligible for a 30-day return policy for refund or replacement, as per the seller's terms.

Installation Manual (PDF): A detailed installation manual in PDF format is available for download. You can access it via the following link: FeeTUO Installation Manual

For any product-related inquiries, technical support, or warranty claims, please contact FeeTUO customer service through the platform where the product was purchased. Please have your model number (FER096) and purchase details ready for faster service.