Coolfire Wooden Vibrating Alarm Clock 1735PK User Manual

Introduction

Thank you for purchasing the Coolfire Wooden Vibrating Alarm Clock, Model 1735PK. This digital alarm clock is designed to provide a reliable wake-up experience, especially for heavy sleepers, through its vibrating shaker and clear display. It also features temperature and humidity monitoring, and a USB charging port. Please read this manual carefully to ensure proper setup and operation of your device.

Important Safety Information

• Keep the device away from water and high humidity environments.
• Do not expose the device to direct sunlight or extreme temperatures.
• Use only the provided power adapter.
• Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel.
• Keep out of reach of children.

Package Contents

Please check that all items are present in your package:

• Coolfire Wooden Vibrating Alarm Clock (1735PK)
• Vibrating Shaker
• Power Adapter
• User Manual (this document)

Image: The Coolfire Wooden Vibrating Alarm Clock, its vibrating shaker, and a phone connected for charging. The clock displays 11:33, 60% RH, and 68°F.

Product Overview

Alarm Clock Unit

• Digital Display: Shows time, temperature, humidity, and alarm status.
• Control Buttons: Located on the back or top for setting time, alarms, and other functions. (Specific button names/functions will be detailed in 'Operating Instructions').

Vibrating Shaker

• Vibration Unit: Connects to the main clock unit to provide tactile alarm.
• Wake-up Mode Switch: Allows selection between Vibrate Only, Sound Only, or Both Vibrate & Sound.
• USB Charging Port: Located on the shaker for charging external devices.

Image: A close-up view of the vibrating shaker, highlighting its "Earthquake Extra Strength Vibration" feature. The shaker is black and oval-shaped.

Image: The underside of the vibrating shaker showing a switch for selecting three wake-up modes: 1. Vibrate Only, 2. Sound Only, 3. Both Vibrate & Sound. A USB port is also visible.

Setup Instructions

1. Connect Power: Plug the provided power adapter into the DC input port on the back of the alarm clock. Then, plug the adapter into a standard wall outlet. The display will light up.
2. Connect Vibrating Shaker: Plug the cable from the vibrating shaker into the designated port on the back of the alarm clock.
3. Position Shaker: Place the vibrating shaker under your pillow or mattress for optimal vibration transfer.

Operating Instructions

Setting Time and Date

(Assume standard button functions like SET, UP, DOWN, or MODE buttons. Specific button names are not provided in the input, so generic terms are used.)

1. Press and hold the SET button (or similar) to enter time setting mode. The hour digits will flash.
2. Use the UP and DOWN buttons to adjust the hour.
3. Press SET again to move to minute setting. Adjust minutes with UP and DOWN.
4. Continue pressing SET to cycle through year, month, and day settings, adjusting each with UP and DOWN.
5. Press SET one last time or wait a few seconds for the settings to save and exit the setting mode.

Setting Alarms

The clock typically supports multiple alarms (e.g., AL1, AL2). Refer to the specific buttons on your device, often labeled ALARM or AL1/AL2.

1. Press the ALARM button (or AL1/AL2) to select an alarm. The alarm time will flash.
2. Press and hold the ALARM button to enter alarm setting mode. The hour digits will flash.
3. Use the UP and DOWN buttons to adjust the alarm hour.
4. Press ALARM again to move to minute setting. Adjust minutes with UP and DOWN.
5. Press ALARM one last time or wait a few seconds to save and activate the alarm. An alarm icon will appear on the display.
6. To turn off an active alarm, press any button when it sounds. To disable an alarm completely, press the ALARM button until the alarm icon disappears.

Choosing Wake-Up Modes (Vibrating Shaker)

The vibrating shaker offers three distinct wake-up modes. Select your preferred mode using the switch located on the shaker unit.

• 1. Vibrate Only: The shaker will vibrate without producing sound. Ideal for waking up without disturbing others.
• 2. Sound Only: The alarm clock will produce an audible sound without vibration.
• 3. Both Vibrate & Sound: The shaker will vibrate, and the alarm clock will produce an audible sound simultaneously.

Image: The underside of the vibrating shaker showing a switch for selecting three wake-up modes: 1. Vibrate Only, 2. Sound Only, 3. Both Vibrate & Sound. A USB port is also visible.

Adjusting Display Brightness

The display brightness can usually be adjusted to suit your preference. Look for a dedicated BRIGHTNESS button or a function accessible via the SET or MODE button.

1. Press the BRIGHTNESS button (or similar) repeatedly to cycle through different brightness levels (e.g., High, Medium, Low, Off).

Temperature and Humidity Display

The clock automatically displays the current room temperature and humidity. No specific setting is required for this feature.

Using the USB Charging Port

A USB charging port is integrated into the vibrating shaker unit, allowing you to charge your mobile devices overnight.

1. Connect your device's USB charging cable to the USB port on the vibrating shaker.
2. Connect the other end of the cable to your smartphone or other USB-powered device.
3. Ensure the alarm clock is powered on for the USB charging port to function.

Image: A close-up view of the vibrating shaker, highlighting its "Earthquake Extra Strength Vibration" feature. The shaker is black and oval-shaped. The USB port is visible on the side.

Maintenance

• Cleaning: Wipe the clock and shaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: If storing the device for an extended period, disconnect it from power and store it in a cool, dry place.

Troubleshooting

Specifications

• Brand: Coolfire
• Model Number: 1735PK
• Display Type: Digital
• Material: Wood
• Product Dimensions: 2.3 x 4 x 1 inches
• Item Weight: 14.4 ounces
• Operation Mode: Electrical
• Features: Alarm Clock, Vibrating Shaker, Temperature Display, Humidity Display, USB Charging Port
• UPC: 724268990346

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Coolfire website. Keep your proof of purchase for warranty claims.

You can visit the Coolfire store on Amazon for more information: Coolfire Store