Introduction
This manual provides essential instructions for the safe and efficient use of your Scangrip WORK LITE M rechargeable LED work lamp. Please read this manual thoroughly before operating the device and retain it for future reference.
The Scangrip WORK LITE M is a lightweight, ergonomic, and rechargeable LED work flashlight designed for various inspection and work tasks. It features adjustable light output, flexible positioning options, and a durable design.
Setup and Initial Use
1. Charging the Device
The WORK LITE M comes with a built-in rechargeable Lithium-Ion battery. Before first use, fully charge the device.
- Locate the USB charging port on the device.
- Connect the included USB charging cable to the lamp and to a compatible USB power source (e.g., computer, USB wall adapter).
- The charging indicator light will show the charging status. Refer to the device for specific indicator behavior (e.g., red for charging, green for fully charged).
- A full charge typically takes several hours.
Note: Only use the provided charging cable or a compatible USB cable. Do not attempt to charge with damaged cables or chargers.
Figure 1: Front view of the Scangrip WORK LITE M work lamp, showing the main LED light panel.
Operating Instructions
1. Power On/Off and Dimming Function
- To turn the lamp on, press the power button located on the side of the device.
- To adjust the light output (dimming function), press and hold the power button. The light intensity will cycle between 10% and 100%. Release the button at your desired brightness level.
- To turn the lamp off, press the power button again.
Figure 2: The WORK LITE M being held in hand, demonstrating its use as a handheld flashlight.
2. Flexible Positioning with SMART CLIP 4-in-1 System
The WORK LITE M is equipped with a versatile SMART CLIP system for hands-free operation and flexible positioning.
- Integrated Magnet: The lamp features a powerful built-in magnet on its base. This allows you to securely attach the lamp to metallic surfaces for hands-free illumination.
- Retractable Swivel Hook: A retractable swivel hook is integrated into the SMART CLIP. Pull out the hook to hang the lamp from various objects or structures. The hook can swivel for optimal light direction.
- Integrated Stand: The SMART CLIP can also function as a stand. Fold out the clip to create a stable base, allowing the lamp to stand upright on any flat surface.
- Belt Clip: The SMART CLIP is designed to fit onto a work belt, allowing you to carry the lamp conveniently and have it readily accessible for inspection tasks.
Figure 3: Illustration of the lamp's magnetic attachment feature, showing it secured to a metal surface.
Figure 4: The WORK LITE M with its swivel hook extended, ready for hanging.
Figure 5: Side view of the WORK LITE M demonstrating the Smart Clip deployed as a stand.
Figure 6: The WORK LITE M attached to a work belt using its integrated Smart Clip.
Maintenance
- Cleaning: Clean the lamp regularly with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the surface or internal components.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place. It is recommended to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.
- Battery Care: The integrated Lithium-Ion battery is not user-replaceable. Do not attempt to open the device or replace the battery yourself.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp using the provided USB cable. |
| Light output is dim. | Battery is low or dimming function is active. | Charge the lamp. Press and hold the power button to adjust brightness to 100%. |
| Lamp does not charge. | Faulty cable or power source. | Try a different USB cable or power adapter. Ensure connections are secure. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Scangrip customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 35668 |
| Light Output | Up to 350 lumens |
| Dimming Function | 10% to 100% adjustable |
| Battery Type | Lithium Ion (included) |
| Power Source | Battery Powered |
| Charging | USB charging cable included |
| Weight | 5.6 ounces |
| Included Components | Hand lamp, charging cable |
| Manufacturer | Scangrip |
Warranty Information
For detailed warranty information regarding your Scangrip WORK LITE M, please refer to the warranty card included with your product or visit the official Scangrip website. Keep your proof of purchase for warranty claims.
Customer Support
If you have any questions, require technical assistance, or need to report a problem with your Scangrip WORK LITE M, please contact Scangrip customer support through their official website or the contact information provided in your product packaging.
Visit the Scangrip Store on Amazon for more information.
