WYBOT Cordless Robotic Pool Cleaner WY1102 Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your WYBOT Cordless Robotic Pool Cleaner, model WY1102. Please read this manual thoroughly before using the product.

2. Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

• Do not operate the cleaner when people are in the pool.
• Ensure the charging port is dry before charging.
• Use only the original charger provided by WYBOT.
• Keep the cleaner out of reach of children.
• Do not use the cleaner for purposes other than pool cleaning.

3. Product Overview

The WYBOT WY1102 is a cordless robotic pool cleaner designed for efficient cleaning of flat-bottomed above-ground and in-ground pools. It features dual motors, fine filtration, and intelligent navigation.

3.1 Package Contents

• WYBOT WY1102 Robotic Pool Cleaner
• Charging Adapter
• User Manual

3.2 Key Features

• Cordless Design: Eliminates tangled cables and electric shock risks.
• Dual Motors: Provides strong suction for effective cleaning.
• 180µm Fine Filter: Captures dust, sand, and small debris.
• Intelligent Navigation: Automatically reverses upon encountering walls and approaches the shore when battery is low.
• Lightweight: Weighs approximately 3.6 kg for easy handling.
• Battery Life: Up to 50-60 minutes of operation on a full charge.

Figure 1: WYBOT WY1102 Cordless Robotic Pool Cleaner. This image shows the green and grey cleaner with water splashing around it, highlighting its aquatic use.

4. Setup

4.1 Charging the Cleaner

1. Ensure the cleaner is completely dry before charging.
2. Connect the charging adapter to the cleaner's charging port.
3. Plug the adapter into a power outlet.
4. The indicator light will show charging status (e.g., red for charging, green for fully charged).
5. A full charge typically takes 3-4 hours.

Figure 2: The WYBOT WY1102 cleaner connected to its charger, indicating the charging process.

4.2 Preparing the Pool

• Remove large debris from the pool surface before operating the cleaner.
• Ensure the pool's pump is running to circulate water, if applicable, though the cleaner operates independently.

5. Operating Instructions

5.1 Starting the Cleaner

1. Once fully charged, ensure the cleaner is powered off.
2. Place the cleaner into the pool. It will sink to the bottom.
3. Press the power button located on the underside of the unit to start the cleaning cycle.

Figure 3: A hand pressing the power button on the underside of the WYBOT WY1102 cleaner, ready for operation in the pool.

5.2 Cleaning Cycle

• The cleaner will automatically navigate the pool bottom, collecting debris.
• It will reverse direction when it encounters a wall or obstacle.
• The cleaning cycle lasts approximately 50-60 minutes on a full charge.

Figure 4: The WYBOT WY1102 cleaner operating on the pool floor, demonstrating its automatic and efficient cleaning capabilities, with debris visible on the bottom.

5.3 Retrieving the Cleaner

• When the battery is low, the cleaner will automatically move closer to the edge of the pool.
• Use the retrieval hook (not included) or carefully lift the cleaner by its handle.
• Allow excess water to drain before removing it completely from the pool.

Figure 5: A person using a pole with a hook to retrieve the lightweight WYBOT WY1102 cleaner from the pool, showing its ease of handling.

6. Maintenance

6.1 Cleaning the Filter

1. After each use, remove the filter basket from the cleaner.
2. Rinse the filter basket thoroughly with a garden hose to remove all collected debris.
3. Ensure the filter is clean and dry before reinserting it into the cleaner.

Figure 6: A person cleaning the filter basket of the WYBOT WY1102 cleaner with a hose, illustrating the simple cleaning process.

6.2 Storage

• Store the cleaner in a cool, dry place away from direct sunlight and extreme temperatures.
• Ensure the battery is fully charged before long-term storage to prolong its lifespan.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official WYBOT website. Keep your purchase receipt for warranty claims.

Contact Information: WYBOT Official Store on Amazon