DORTALA Wicker Patio Bistro Set 3 Piece Instruction Manual

Important Safety Information

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage.

• Follow all instructions provided for assembly and use to ensure safety.
• Check the product for any damage or defects upon receipt. Do not assemble or use if damaged.
• Ensure stability and secure placement of the furniture to avoid tip-over risks.
• Keep children and pets away from the assembly area.
• Do not overtighten screws during assembly, as this may damage the components. Tighten all screws only after all parts are aligned.

Package Contents

Verify that all components are present before beginning assembly:

• 1 x Dining Table
• 2 x Single Chair
• 2 x Cushion
• 1 x Instruction Manual (this document)
• Hardware Pack (Bolts, Washers, Allen Wrench)

Assembly Instructions

Please do not tighten screws before all the screw holes are lined up. Refer to the assembly video for visual guidance.

Chair Assembly (x2)

1. Identify chair components: Parts A, B, C, D, E.
2. Connect part E (backrest) with part D (seat base) using Bolt 1. Ensure holes align before partially tightening.
3. Connect part B (side panel) with part D (seat base) using Bolt 1.
4. Connect part A (front panel) with part D (seat base) using Bolt 2.
5. Connect part B (side panel) with part A (front panel) using Bolt 1.
6. Connect part E (backrest) with part C (other side panel) using Bolt 1.
7. Connect part A (front panel) with part C (other side panel) using Bolt 2.
8. Once all parts are loosely connected and aligned, fully tighten all bolts using the provided Allen wrench.
9. Adjust the chair if it is uneven after assembly.

Image showing the dimensions of the chair and table, indicating a chair capacity of 350 lbs and table capacity of 110 lbs.

Table Assembly

1. Identify table components: Parts F, G, H, I.
2. Connect part F (table base) with part G (table side panel) using Bolt 1.
3. Attach part H (support bar) to connect part F and part G using Bolt 3.
4. Repeat for the other side panel.
5. Place the tempered glass tabletop (Part I) onto the assembled table frame. Ensure it sits securely and use the provided suction cups to fix it in place.

Image detailing the premium tempered glass tabletop and the suction cup mechanism for secure attachment.

Operating Instructions

The DORTALA Wicker Patio Bistro Set is designed for outdoor use, providing comfortable seating and a convenient surface for dining or relaxation.

• Placement: Position the bistro set on a flat, stable surface in your desired outdoor area (balcony, porch, backyard, deck, poolside, terrace).
• Seating: Place the cushions on the chairs for enhanced comfort. The curved backrest and ergonomic armrests are designed to support your body.
• Table Use: Use the tempered glass table for placing food, drinks, or decorative items. Ensure items are placed centrally to maintain balance.
• Space-Saving Storage: When not in use, the two chairs can be tucked underneath the dining table to minimize floor space.

Image demonstrating the space-saving design where chairs can be stored under the table.

Maintenance

Proper care will extend the life and appearance of your patio bistro set.

• Cleaning Wicker: Wipe the PE rattan surfaces with a damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly. Avoid harsh chemicals or abrasive cleaners.
• Cushion Care: The zippered cushions feature removable and washable covers for easy daily cleaning. Hand wash or machine wash on a gentle cycle with cold water. Air dry only. Do not bleach or iron. Store cushions indoors during inclement weather or prolonged periods of non-use to prevent fading and wear.
• Glass Tabletop: Clean the tempered glass tabletop with a glass cleaner and a soft cloth.
• Frame Maintenance: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
• Weather Protection: While the PE rattan is weather-resistant, covering the set during heavy rain, snow, or extreme temperatures is recommended to prolong its lifespan.

Image showing the soft touch of the cushion and the removable, washable cover with a zipper.

Troubleshooting

Common issues and their solutions:

• Uneven Chair/Table: If the furniture wobbles after assembly, loosen all bolts slightly, place the item on a flat surface, apply gentle pressure to level it, then retighten all bolts.
• Difficulty Aligning Screw Holes: Ensure all parts are correctly oriented according to the instructions. Do not fully tighten any screws until all components are loosely assembled and aligned.
• Loose Connections: Periodically check and tighten all bolts to maintain stability and safety.
• Cushions Sliding: If cushions slide, consider adding non-slip pads underneath them.

Specifications

Image highlighting key construction features: weather-resistant PE rattan, stable steel support, and anti-slip foot pads for enhanced stability.

Warranty

DORTALA products are manufactured with quality and durability in mind. For specific warranty details, please refer to the product packaging or contact DORTALA customer support. Keep your proof of purchase for any warranty claims.

Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact DORTALA customer support. Contact information can typically be found on the product packaging or the official DORTALA website.

You may also visit the DORTALA store on Amazon for more information: DORTALA Store