Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Attune Handheld Shower Head. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
The Moen Attune Handheld Shower Head features a Spot Resist Brushed Nickel finish and offers 6 distinct spray settings for a customized showering experience. It is designed for ease of use and durability.
Safety Information
Please observe the following safety precautions during installation and use:
- Ensure the main water supply is turned off before beginning any installation or maintenance.
- Use appropriate tools and wear safety glasses to prevent injury.
- Do not overtighten connections, as this may damage the product or plumbing.
- Verify all connections are secure and leak-free before restoring water supply.
- Keep small parts away from children to prevent choking hazards.
Package Contents
Verify that all components are present before beginning installation:
- Handshower
- 60-inch double interlock spiral hose (metal)
- Handshower Bracket
- 3 Washers (pre-installed)
Specifications
| Feature | Detail |
|---|---|
| Model Number | 218H0SRN |
| Finish | Spot Resist Brushed Nickel |
| Material | Nickel, Plastic |
| Handshower Diameter | 4 inches |
| Spray Settings | 6 (Full Spray, Downpour, Relaxing Massage, Massage, Rinse, Full Coverage Light) |
| Hose Length | 60 inches |
| Flow Rate | 1.75 GPM (6.65 L/Min) Max |
| Installation Type | Wall Mounted |
| WaterSense Certified | Yes |
Installation
The Moen Attune Handheld Shower Head is designed for easy installation. Follow these general steps:
- Prepare the Shower Area: Turn off the main water supply to your shower. Remove your existing shower head and clean any debris from the shower arm threads.
- Install the Shower Arm Bracket: Apply plumber's tape to the threads of your shower arm. Thread the handshower bracket onto the shower arm and hand-tighten. Use a wrench to tighten an additional 1/4 to 1/2 turn, ensuring the bracket is securely oriented.
- Connect the Hose: Attach one end of the 60-inch metal hose to the handshower bracket. Attach the other end of the hose to the handheld shower head. Ensure washers are properly seated in both connections and hand-tighten.
- Mount the Handshower: Place the handheld shower head into the bracket.
- Test for Leaks: Turn the main water supply back on and check all connections for leaks. If leaks occur, tighten connections slightly until they stop.
Operating Instructions
Your Moen Attune Handheld Shower Head offers 6 distinct spray settings. To change the spray pattern, rotate the dial on the face of the shower head. The available settings include:
- Full Spray: A comprehensive, invigorating spray.
- Downpour: A concentrated, heavy flow.
- Relaxing Massage: A gentle, pulsating massage spray.
- Massage: A more intense, targeted massage spray.
- Rinse: A focused stream for efficient rinsing.
- Full Coverage Light: A lighter, broader spray for general use.
Product Video: Moen Attune Showering
Video 1: This video demonstrates the features and various spray settings of the Moen Attune Handheld Shower Head, showcasing its performance and design.
Maintenance
To maintain the appearance and performance of your Moen Attune Handheld Shower Head, follow these cleaning guidelines:
- Spot Resist Finish: The Spot Resist Brushed Nickel finish is designed to resist fingerprints and water spots. To clean, simply wipe with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scrubbing pads, as these can damage the finish.
- Rub-Clean Nozzles: The nozzles are designed for easy cleaning. If mineral deposits build up, gently rub the rubber nozzles with your finger or a soft brush to dislodge them. This helps maintain a consistent spray pattern.
- Hose Cleaning: Wipe the metal hose with a soft, damp cloth as needed.
Troubleshooting
If you encounter issues with your Moen Attune Handheld Shower Head, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles or flow restrictor. | Clean the rub-clean nozzles. Ensure the flow restrictor (if present and removable per local codes) is not obstructed. |
| Leaking at Connections | Loose connections or improperly seated washers. | Ensure all connections are hand-tightened, then use a wrench for an additional 1/4 to 1/2 turn. Verify washers are correctly placed. Apply plumber's tape if necessary. |
| Inconsistent Spray Pattern | Mineral buildup in nozzles. | Gently rub the rubber nozzles to clear any blockages. |
Warranty and Support
The Moen Attune Handheld Shower Head is backed by Moen's Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Moen website or contact Moen customer service directly.
For further assistance, visit the Moen Store on Amazon.
