EGLO Tarbes 43679A LED Pendant Light User Manual

1. Introduction

Thank you for choosing the EGLO Tarbes 43679A LED Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.

Image 1.1: The EGLO Tarbes 43679A LED Pendant Light, featuring a brushed brass finish and a geometric open-frame metal shade.

2. Safety Information

Always follow basic safety precautions when installing and operating electrical products to reduce the risk of fire, electric shock, and personal injury.

• Disconnect Power: Always disconnect power at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
• Qualified Electrician: If you are unsure about the installation process, consult a qualified electrician.
• Local Codes: Ensure all wiring and installation comply with local electrical codes and ordinances.
• Proper Grounding: This fixture must be properly grounded.
• Handle with Care: Do not handle the fixture or power cord with wet hands.
• Indoor Use Only: This fixture is dry rated and intended for indoor use only. Do not expose to moisture.

3. Package Contents

Carefully unpack your fixture and check that all parts are included. Keep all packaging materials until you are sure all parts are present and in good condition.

• Pendant Light Fixture (with integrated LED)
• Mounting Hardware
• Canopy
• Installation Instructions (this manual)

4. Setup (Installation)

Follow these general steps for installing your pendant light. Specific details may vary based on your electrical box and ceiling type.

1. Turn Off Power: Before starting, ensure the power to the circuit at the main fuse or circuit breaker box is turned off.
2. Prepare Mounting Surface: Securely attach the mounting bracket (if separate) to the electrical junction box in the ceiling. Ensure it is firmly fastened to a structural element.
3. Adjust Hanging Length: The pendant light features an adjustable hanging length via its black cord. Determine the desired height for your fixture and adjust the cord length accordingly before making electrical connections. The cord length is approximately 72 inches.
4. Make Electrical Connections: Connect the fixture's wires to the corresponding wires from the junction box (typically black to black, white to white, and ground to ground). Use approved wire connectors and ensure all connections are secure.
5. Secure Canopy: Carefully push the wires into the junction box and secure the fixture's canopy (diameter 4.50 inches) to the mounting bracket, ensuring it sits flush against the ceiling.
6. Restore Power: Once installation is complete and all connections are secure, restore power at the main fuse or circuit breaker box.

Image 4.1: The EGLO Tarbes pendant light installed above a dining table, demonstrating its aesthetic integration into a living space.

5. Operating Instructions

The EGLO Tarbes 43679A LED Pendant Light is designed for simple operation.

• Power On/Off: Control the light using a standard wall switch connected to the circuit.
• Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on your circuit. Follow the dimmer switch manufacturer's instructions for operation.
• Control Method: While the product supports app control, specific app integration details are not provided with this manual. Please refer to EGLO's official website or support for app-related instructions if applicable.

6. Maintenance

Proper care will ensure the longevity and appearance of your EGLO Tarbes pendant light.

• Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: This fixture uses an integrated LED light source. The LED is not user-replaceable. If the LED fails, the entire fixture may need to be replaced.
• Regular Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

7. Troubleshooting

If you encounter issues with your pendant light, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact customer support.

8. Specifications

Detailed technical specifications for the EGLO Tarbes 43679A LED Pendant Light:

• Model: 43679A
• Collection: Tarbes
• Finish Color: Brushed Brass
• Material: Steel (Shade), Alloy Steel (Overall)
• Shade Material: Glass (Note: Product description states Steel, but specifications list Glass. Steel is the primary material for the cage.)
• Dimensions (Product): 12.8 inches (Width) x 12.8 inches (Length) x 9.41 inches (Height)
• Item Weight: 3.5 Pounds
• Lamping Type: Integrated LED
• Number of Light Sources: 1
• Wattage: 15 Watts
• Voltage: 120 Volts
• Dimmable: Yes
• Moisture Rating: Dry Rated
• Hanging Method: Cord
• Cord Length: 72.00 inches (Adjustable)
• Canopy Diameter: 4.50 inches
• Control Method: App (Functionality may require additional setup or compatible devices)

9. Warranty

The EGLO Tarbes 43679A LED Pendant Light comes with a 1-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to EGLO's official warranty policy or contact customer support.

10. Support

For further assistance, technical support, or warranty inquiries regarding your EGLO Tarbes 43679A LED Pendant Light, please contact EGLO customer service through their official website or the retailer from whom you purchased the product. Please have your model number (43679A) and proof of purchase ready when contacting support.