1. Introduction
Thank you for choosing the USX Mount Full Motion TV Wall Mount. This product is designed to provide a secure and flexible viewing experience for your television. This manual contains important information regarding the safe installation, operation, and maintenance of your TV wall mount. Please read it thoroughly before beginning installation and keep it for future reference.
Image: Overview of the USX Mount Full Motion TV Wall Mount and its included accessories.
2. Safety Information
WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty.
- This product is intended for indoor use only.
- Ensure the mounting surface can safely support the combined weight of the mount and the television.
- Do not mount on drywall alone. Always mount into wood studs or concrete/brick walls using appropriate anchors.
- Use only the hardware provided or specified by the manufacturer.
- If you are unsure about any part of the installation process, consult a qualified professional.
- Keep children and pets away during installation.
- Periodically check that the mount is secure and all fasteners are tight.
3. Package Contents
Please verify that all parts are present and undamaged before installation. If any parts are missing or defective, contact customer service.
- Full Motion TV Wall Mount Assembly
- TV Brackets (for attaching to TV)
- Soundbar Brackets (optional, for attaching soundbar)
- Bubble Level
- Cable Ties
- Mounting Template
- All necessary hardware (screws, washers, spacers, anchors) in pre-labeled bags
Image: All components included in the package.
4. Product Specifications
| Feature | Specification |
|---|---|
| Compatible TV Sizes | Most 42-85 inch TVs |
| VESA Compatibility | 200x100mm to 600x400mm |
| Weight Capacity | Up to 132 lbs (60 kg) |
| Tilt Angle | +5° / -15° |
| Swivel Angle | ±45° (max. angle depends on TV size) |
| Level Adjustment | ±4° |
| Wall Distance (Retracted) | 2.52 inches |
| Wall Distance (Extended) | 16.61 inches |
| Material | Alloy Steel |
Image: Structural features and weight capacity of the mount.
5. Installation Guide
5.1 Wall Compatibility
This mount is designed for installation on wood studs or solid concrete/brick walls. DO NOT mount on drywall alone.
Image: Wall compatibility for installation (Concrete and Wood Stud).
5.2 Mount Assembly and Wall Attachment
- Locate Studs/Mark Holes: Use a stud finder to locate the center of your wood studs. For concrete walls, mark the desired drilling locations. Use the provided mounting template for accurate placement.
- Drill Pilot Holes: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the lag bolts used.
- Attach Wall Plate: Secure the wall plate to the wall using the lag bolts and washers. For concrete walls, insert concrete anchors before securing the lag bolts. Ensure the wall plate is level using the included bubble level.
- Assemble Articulating Arms: The articulating arms are pre-assembled. Ensure all pivot points move freely.
5.3 TV Attachment
- Attach TV Brackets: Carefully place your TV face down on a soft, clean surface. Attach the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes.
- Hang TV on Mount: With assistance, carefully lift the television and hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
- Secure TV: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall plate, preventing accidental dislodging.
6. Operating Instructions
Your USX Mount Full Motion TV Wall Mount offers various adjustments for optimal viewing.
6.1 Adjusting Tilt and Swivel
The mount allows for easy adjustment of tilt and swivel angles to reduce glare and achieve the best viewing position.
- Tilt: The mount features a tool-free tilt mechanism. Gently push or pull the top or bottom of your TV to adjust the tilt angle between +5° and -15°.
- Swivel: Gently push or pull the side of your TV to swivel it left or right. The swivel angle can reach up to ±45°, depending on your TV size and its distance from the wall.
Image: Demonstrating the mount's extension, retraction, and tilt capabilities.
6.2 Extending and Retracting
The articulating arms allow you to extend your TV up to 16.61 inches from the wall or retract it back to a slim 2.52 inches, saving valuable space.
- To extend, gently pull the TV away from the wall.
- To retract, gently push the TV back towards the wall.
Use the included cable ties to manage TV cables neatly along the mount arms, contributing to a clean and organized appearance.
7. Soundbar Mount Installation & Operation
This mount includes optional soundbar brackets for an integrated audio setup.
7.1 Soundbar Mount Installation
- Pre-assemble Soundbar Brackets: Attach the soundbar brackets to the TV brackets using the provided hardware. Ensure they are oriented correctly for your soundbar's mounting holes.
- Attach Soundbar to Brackets: Secure your soundbar to the pre-assembled brackets. The brackets support various mounting options including keyholes, back screw holes, and bottom holes (L-shaped brackets included for bottom mounting).
- Mount Soundbar Assembly to TV: Once the soundbar is attached to its brackets, the entire assembly can be mounted to the TV.
Image: Soundbar bracket installation options and L-shaped brackets.
7.2 Soundbar Mount Operation
The soundbar brackets are designed to move with your TV, maintaining optimal sound projection regardless of the TV's position.
- Integrated Movement: When you extend, retract, tilt, or swivel your TV, the soundbar will move along with it, ensuring the sound is always directed towards your viewing area.
- 360° Rotation: The soundbar brackets allow for 360° rotation, providing flexibility for various soundbar designs and optimal positioning.
Image: 360° rotation feature of the soundbar brackets.
8. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Over time, vibrations or adjustments can cause fasteners to loosen.
- Lubrication: The articulating joints are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points.
9. Troubleshooting
If you encounter issues with your TV mount, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| TV is not level | Check the level adjustment on the mount. Ensure the wall plate was installed level. |
| Mount feels loose on the wall | Re-tighten all lag bolts securing the wall plate. Ensure proper anchors were used for concrete walls. Do not exceed weight capacity. |
| TV does not move smoothly | Check for obstructions. Apply a small amount of silicone lubricant to the articulating joints if necessary. Ensure no cables are snagged. |
| Missing parts | Contact USX MOUNT customer service immediately for replacement parts. |
10. Warranty and Customer Support
USX MOUNT is committed to providing quality products and excellent customer service. If you have any questions, concerns, or require assistance with installation or troubleshooting, please do not hesitate to contact our US-based customer service team.
Our engineers can simulate the installation for you if you are unsure if this mount will work for your specific TV model. Please provide the complete TV model number when contacting support.
For support, please refer to the contact information provided with your purchase or visit the official USX MOUNT website.
