Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LUXRITE 18-Inch LED Flush Mount Ceiling Light. This modern fixture features a matte black finish, offers 5 selectable color temperatures (2700K, 3000K, 3500K, 4000K, 5000K), and is dimmable. Please read this manual thoroughly before installation and retain it for future reference.
Image: The LUXRITE 18-inch LED flush mount ceiling light in matte black, showcasing its sleek, round design.
Setup and Installation
Safety First: Before beginning installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. Consult a qualified electrician if you are unsure about electrical wiring.
Required Tools (Not Included):
- Screwdriver
- Wire strippers
- Electrical tape
- Safety glasses
Installation Steps:
- Prepare the Fixture: Loosen the screws from the fixture housing and carefully remove the cover.
- Mounting Bracket: Install the mounting screws into the junction box (J-box) in your ceiling. Ensure the J-box is securely fastened.
- Wiring Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Secure connections with electrical tape.
- Secure Fixture: Securely mount the fixture base to the J-box using the provided screws.
- Select Color Temperature: Before replacing the cover, locate the CCT (Correlated Color Temperature) switch on the fixture's driver. Select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
- Replace Cover: Place the fixture cover back onto the housing and tighten the screws to secure it in place.
Image: A visual guide illustrating the four-step installation process for the flush mount ceiling light, from removing the cover to securing it.
Operating Instructions
Color Temperature Selection
Your LUXRITE LED Flush Mount Ceiling Light offers five selectable color temperatures to suit various preferences and environments. The color temperature is set using a switch located on the fixture's driver before the cover is installed. Choose from:
- 2700K: Warm White
- 3000K: Soft White
- 3500K: Natural White
- 4000K: Cool White
- 5000K: Bright White
Image: A visual representation of the five color temperature options (2700K to 5000K) and a close-up of the easy-to-adjust CCT switch located on the fixture's internal wiring.
Image: An illustration demonstrating the effect of different color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) on a room's ambiance, alongside a detailed view of the CCT switch.
Dimming Functionality
This fixture is designed to be dimmable, allowing you to adjust the light output from 100% down to 10%. For optimal performance and to avoid flickering, use with compatible LED dimmers. Refer to the list of compatible dimmers below.
Image: A table listing compatible dimmer models from brands like Lutron and Leviton, ensuring proper dimming functionality for the LUXRITE LED fixture.
Maintenance
To maintain the appearance and performance of your LED flush mount ceiling light, follow these simple guidelines:
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- No User-Serviceable Parts: The LED components are integrated and not designed for user replacement. Do not attempt to open or repair the fixture beyond the initial installation steps.
- Regular Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your LUXRITE LED Flush Mount Ceiling Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Incorrect CCT switch setting | Check circuit breaker/fuse. Verify all wire connections are secure. Ensure CCT switch is set to a valid position. |
| Light flickers or dims improperly | Incompatible dimmer switch Loose wiring | Ensure dimmer is LED compatible and listed as compatible by LUXRITE. Check wiring connections for tightness. |
| Light output is too low or too high | Incorrect CCT setting Dimmer setting | Adjust the CCT switch to your preferred color temperature. Adjust the dimmer switch to increase or decrease brightness. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LR23294 |
| Size | 18 Inch |
| Color | Matte Black |
| Material | Acrylic, Metal |
| Wattage | 24 Watts |
| Voltage | 120 Volts |
| Brightness | 2160 Lumens |
| Color Temperature Options | 2700K, 3000K, 3500K, 4000K, 5000K (Selectable) |
| Dimmable | Yes (with compatible LED dimmers) |
| Indoor/Outdoor Usage | Indoor, Outdoor (Damp Rated) |
| Certifications | ETL Listed, Energy Star |
| Lifetime | 50,000 hours |
| Product Dimensions | 18"L x 4.45"W x 18"H |
Image: A diagram illustrating the physical dimensions of the 18-inch flush mount ceiling light, showing a diameter of 18 inches and a height of 4.45 inches.
Warranty Information
This LUXRITE LED Flush Mount Ceiling Light is covered by a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact LUXRITE customer support.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact LUXRITE customer support through their official website or the retailer where the product was purchased. Please have your model number (LR23294) and proof of purchase ready when contacting support.
Online Resources: Visit the LUXRITE Store on Amazon for additional product information and support.
