Roberts Revival Uno BT DAB+/FM/Bluetooth Portable Radio User Manual

Introduction

The Roberts Revival Uno BT is a compact and stylish portable radio that blends classic 1950s retro design with modern functionality. This model, inspired by the iconic Revival RD70 and iStream3, offers enhanced sound quality and versatile connectivity options, including DAB+, FM, and Bluetooth. Designed to be a perfect fit for a bedside table or smaller room, it also features dual alarms, a sleep timer, a dimmable display, and a 3.5mm headphone output.

Image: The Roberts Revival Uno BT radio in a home setting, demonstrating its compact size and aesthetic appeal on a wooden cabinet.

Setup

1. Unpacking: Carefully remove the radio and all accessories from the packaging. Ensure all components listed in the "Specifications" section are present.
2. Powering On:
   • Mains Power: Connect the supplied AC adapter to the DC IN socket on the back of the radio and then plug it into a wall outlet.
   • Battery Power (Optional): The radio can also be powered by batteries (not included). Open the battery compartment on the bottom and insert the required batteries, observing polarity.
3. Antenna Adjustment: Extend the telescopic antenna fully for optimal DAB+ and FM reception. Adjust its position for the best signal.
4. Initial Setup: Upon first power-on, the radio may prompt you to select a language and perform an auto-scan for DAB+ stations. Follow the on-screen instructions.

Operating Instructions

Controls Overview

Image: Top view of the Roberts Revival Uno BT radio, highlighting the control panel with buttons for Favourite, Mode, Menu, AutoTune, Info/Dimmer, Preset, Volume, and Tuning dials, along with the display screen.

• Volume Dial: Rotate to adjust the audio volume. Press to power On/Off.
• Tuning Dial: Rotate to navigate menus or tune stations. Press to select.
• Favourite Button: Access your saved favourite stations.
• Mode Button: Switch between DAB+, FM, Bluetooth, and Aux-in modes.
• Menu Button: Access system settings and options for the current mode.
• AutoTune Button: Initiate an automatic scan for radio stations.
• Info/Dimmer Button: Cycle through display information or adjust display brightness.
• Preset Button: Save or recall radio station presets.
• Aux In (3.5mm Jack): Connect external audio devices.

DAB+ Radio Operation

1. Press the Mode button until "DAB" is displayed.
2. The radio will automatically scan for available DAB+ stations. If not, press AutoTune.
3. Rotate the Tuning dial to browse through the list of available stations. Press the dial to select a station.
4. To save a preset: Tune to the desired station, press and hold the Preset button. Rotate the Tuning dial to select a preset number, then press to confirm.
5. To recall a preset: Press the Preset button briefly, rotate the Tuning dial to select the preset number, then press to confirm.

FM Radio Operation

1. Press the Mode button until "FM" is displayed.
2. To auto-scan: Press and hold the AutoTune button. The radio will scan and stop at the next strong station.
3. To manual tune: Rotate the Tuning dial to adjust the frequency in small increments.
4. Saving and recalling presets works the same as for DAB+ radio.

Bluetooth Mode

1. Press the Mode button until "Bluetooth" is displayed. The radio will enter pairing mode, indicated by a flashing Bluetooth icon on the display.
2. On your Bluetooth device (e.g., smartphone, tablet), enable Bluetooth and search for "Roberts Uno BT".
3. Select "Roberts Uno BT" from the list of available devices to pair. Once connected, the Bluetooth icon on the radio's display will become solid.
4. You can now play audio from your device through the radio.

Aux-in Mode

1. Connect an external audio device (e.g., MP3 player) to the Aux In 3.5mm jack on the radio using a suitable audio cable (not supplied).
2. Press the Mode button until "Aux In" is displayed.
3. Control playback and volume from your connected external device.

Alarm Clock and Sleep Timer

• Setting Alarms: The Revival Uno BT supports two independent alarms. Access alarm settings via the Menu button. Follow the on-screen prompts to set alarm time, source (DAB/FM/Buzzer), and frequency.
• Setting Sleep Timer: The sleep timer allows the radio to turn off automatically after a set period. Access this feature via the Menu button and select the desired duration.
• Display Dimmer: Press the Info/Dimmer button repeatedly to cycle through different display brightness levels.
• Headphone Output: Connect 3.5mm headphones to the headphone jack for private listening. The radio's speaker will be muted.

Maintenance

• Cleaning: Wipe the radio with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
• Storage: If storing the radio for an extended period, disconnect it from the mains power and remove any batteries to prevent leakage. Store in a cool, dry place.
• General Care: Avoid exposing the radio to extreme temperatures, humidity, direct sunlight, or dusty environments. Do not block ventilation openings.

Troubleshooting

Specifications

Warranty and Support

Roberts Radio products are designed for reliability and performance.

• Spare Parts Availability: Spare parts for this product are available for up to 5 years from the date of purchase.
• Software Updates: Information regarding guaranteed software updates is not available.
• For further assistance, technical support, or warranty claims, please refer to the contact information provided in your Quick Start Guide or visit the official Roberts Radio website.