1. Introduction
Thank you for choosing the Baseus Orange Dot Wireless Presenter. This device is designed to enhance your presentations with its RF2.4GHz wireless technology, integrated laser pointer, and versatile USB/Type-C receiver. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.
2. Package Contents
Before proceeding, please verify that all items are present in your package:
- Baseus Orange Dot Wireless Presenter
- USB/Type-C Dual Receiver
- AAA Battery (for battery version)
- User Manual (this document)
Image: Contents of the package include the wireless presenter, a USB/Type-C receiver, and an AAA battery.
3. Setup Instructions
3.1 Battery Installation
If your presenter is the battery-powered version, follow these steps:
- Open the battery compartment cover located at the rear of the presenter.
- Insert one AAA battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
Image: Insert one AAA battery into the designated compartment. Ensure correct polarity.
3.2 Receiver Connection
The presenter features a dual USB/Type-C receiver for broad compatibility.
- Locate the receiver stored magnetically within the presenter's body. Gently pull it out.
- Plug the receiver into an available USB-A or Type-C port on your computer or laptop. The system will automatically detect and install the necessary drivers. No additional software installation is required.
Image: The dual USB/Type-C receiver connects to your computer for wireless operation.
Image: The receiver can be stored magnetically within the presenter body when not in use.
4. Operating Instructions
Familiarize yourself with the presenter's buttons for effective control during your presentation.
Image: Control buttons for page navigation, laser activation, and volume adjustment.
4.1 Power On/Off
The presenter typically powers on automatically when the receiver is connected and a button is pressed. To conserve battery, ensure the receiver is disconnected when not in use.
4.2 Presentation Control
- Page Up Button (<): Press to move to the previous slide or page.
- Page Down Button (>): Press to move to the next slide or page.
- Full Screen/Black Screen Button: Press to toggle between full-screen mode and black screen mode in presentation software.
4.3 Laser Pointer Function
Press and hold the dedicated laser button (usually a red dot icon) to activate the red laser pointer. Release the button to turn off the laser.
Image: The laser pointer function highlights content on a display.
4.4 Volume Control
Use the designated volume buttons (if present) to adjust the audio output of your computer during a presentation.
5. Maintenance
Proper care ensures the longevity of your Baseus Orange Dot Wireless Presenter.
- Cleaning: Use a soft, dry cloth to clean the surface of the presenter. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the presenter and its receiver in a dry, cool place. Always store the receiver inside the presenter's magnetic compartment to prevent loss.
- Battery Care: For battery-powered versions, remove the AAA battery if the presenter will not be used for an extended period to prevent leakage.
6. Troubleshooting
If you encounter issues with your presenter, refer to the following common problems and solutions:
- Presenter is unresponsive:
- Ensure the receiver is securely plugged into a USB-A or Type-C port on your computer.
- For battery versions, check if the AAA battery is inserted correctly and has sufficient charge. Replace if necessary.
- Try plugging the receiver into a different USB port on your computer.
- Restart your computer.
- Laser pointer is not working:
- Ensure the presenter has power (battery charged/inserted).
- Confirm you are pressing and holding the correct laser activation button.
- Slides are not advancing/going back:
- Verify that your presentation software (e.g., PowerPoint, Keynote) is active and in presentation mode.
- Ensure the receiver is properly connected and recognized by your computer.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Baseus |
| Model Name | Orange Dot Wireless Presenter |
| Model Number | LFZ_OrangeDotPresenter |
| Connectivity | RF 2.4GHz Wireless |
| Receiver Type | USB-A / Type-C Dual Interface |
| Laser Type | Red Laser |
| Laser Distance | Up to 100 meters |
| Remote Control Distance | Up to 100 meters |
| Power Source | 1 x AAA Battery (for battery version) |
| Item Weight | 60 g |
| Package Dimensions | 19.5 x 7 x 1.9 cm |
| Country of Origin | China |
8. Warranty and Support
Baseus products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Baseus website. For technical support or further assistance, please contact Baseus customer service through their official channels.
