1. Introduction
Thank you for choosing the Baseus Blade 100W Portable Power Bank. This high-capacity, slim power bank is designed to provide efficient and fast charging for a wide range of devices, including laptops, tablets, and smartphones. Its advanced features ensure reliable power on the go.
Figure 1: Baseus Blade 100W Portable Power Bank
2. Product Features
- 100W Power Delivery: Equipped with 2 PD USB-C ports (PD 3.0 and PPS certified) offering up to 100W output, capable of fast charging a MacBook Pro 16-inch up to 36% in 30 minutes.
- Thin & Lightweight Design: Product Size: 5.28 x 5.28 x 0.78 inches (13.5 cm x 13.5cm x 2.4cm), Weight: 15.9 oz (451g). Its ultra-slim profile allows for easy portability.
- Two-way Fast Charging: Features 2 USB-C ports (100W output, 60W input) and 2 fast-charging USB-A ports, compatible with a wide range of devices.
- LED Digital Display: Exclusive LED status display to monitor charging speed and time. An orange lightning icon indicates fast charging. When recharging, the display shows the time remaining for full recharge.
- Universal Compatibility: Supports PD 3.0, QC 4.0, SCP, FCP fast charging protocols, making it compatible with various devices including MacBook, Dell, HP, iPad, iPhone, Samsung Galaxy, Switch, and Steam Deck.
- Advanced Safety Features: Built-in chip powered by BPSⅡ (Baseus Power Split) technology protects devices from overheat, short-circuit, and over-discharging.
Figure 2: Fast Charging Capability for Laptops
Figure 3: Charging Multiple Devices
Figure 4: LED Digital Display
Figure 5: Universal Compatibility
Figure 6: BPSⅡ Chip for Enhanced Safety
3. Package Contents
The package includes:
- 1x Baseus 100W 20000 mAh Power Bank
- 1x USB-C to C 100W Cable
- 1x User Manual (PDF available via provided link in product details)
4. Setup
4.1 Charging the Power Bank
To recharge your Baseus Blade 100W Portable Power Bank, connect a 65W USB-C PD wall charger (not included) to one of the USB-C input ports on the power bank using the provided USB-C to C cable. The LED display will show the remaining time until the power bank is fully recharged. A full recharge takes approximately 1.2 hours with a 65W charger.
5. Operating
5.1 Charging Your Devices
Connect your device to the power bank using an appropriate USB-C or USB-A cable. The power bank supports simultaneous charging of up to four devices. The LED display will show the current charging power (voltage and amperage) and the estimated remaining battery life.
The power bank supports pass-through charging, meaning you can recharge the power bank itself while simultaneously charging your devices. The power will be intelligently distributed.
6. LED Digital Display
The integrated LED digital display provides real-time information about the power bank's status:
- Remaining Battery Level: Shows the percentage of charge left in the power bank.
- Charging Power: Displays the voltage (V) and amperage (A) of the current output or input.
- Charging/Recharging Time: Indicates the estimated time remaining until the power bank is fully charged or fully discharged, based on current usage.
- An orange lightning icon on the display signifies that fast charging is active.
7. Safety Information
The Baseus Blade 100W Portable Power Bank incorporates advanced safety features to protect both the device and your connected electronics:
- Overheat Protection: Prevents the power bank from reaching unsafe temperatures during operation.
- Short-Circuit Protection: Automatically cuts off power in case of a short circuit to prevent damage.
- Over-Discharging Protection: Safeguards the battery from being completely drained, which can extend its lifespan.
- The BPSⅡ (Baseus Power Split) technology intelligently manages power distribution for optimal safety and efficiency.
Do not expose the power bank to extreme temperatures, direct sunlight, or water. Avoid dropping or disassembling the device.
8. Maintenance
To ensure the longevity and optimal performance of your power bank:
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid fully discharging the power bank frequently. Recharge it when the battery level is low.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- If storing for extended periods, charge the power bank to about 50-70% every 3-6 months.
9. Troubleshooting
9.1 Power Bank Not Charging
- Ensure the charging cable is securely connected to both the power bank and the wall charger.
- Verify that the wall charger is functioning correctly and is a PD-compatible charger (preferably 65W or higher).
- Try a different USB-C to C cable.
9.2 Devices Not Charging
- Check if the power bank has sufficient charge.
- Ensure the charging cable is securely connected to both the power bank and your device.
- Try a different port on the power bank.
- Use a different charging cable that is known to be functional.
9.3 Slow Charging
- Ensure you are using a fast-charging compatible cable and device.
- Check the power output displayed on the LED screen. If it's lower than expected, try a different port or cable.
- Charging multiple devices simultaneously may reduce the charging speed for individual devices.
10. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 5.28 x 0.78 x 5.28 inches |
| Item Weight | 1.08 pounds |
| Item Model Number | PPBLD100-X |
| Batteries | 2 Lithium Polymer batteries required |
| Battery Capacity | 20000 Milliamp Hours |
| Special Features | Digital Display, Short Circuit Protection, Over Charging Protection, Fast Charging |
| Connector Type | USB Type C, USB Type A |
| Color | Black |
11. Warranty and Support
Baseus provides 24-month Customer Care for this product. For any support inquiries or warranty claims, please refer to the contact information provided in your purchase documentation or visit the official Baseus website.
An official User Manual (PDF) is also available for download. Please check your product's Amazon page for the direct link.
