Gotrax EBE6 26" Electric Bike User Manual

1. Introduction

Thank you for choosing the Gotrax EBE6 26" Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your electric bicycle. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

The Gotrax EBE6 is designed for adult riders, featuring a powerful 500W motor, a 499.2Wh Lithium-Ion battery, and a 7-speed transmission system, making it suitable for various terrains including city roads, trails, and light mountain paths.

Figure 1: Gotrax EBE6 Electric Bike. This image shows the complete electric bike from a front-side angle, highlighting its frame, wheels, handlebars, seat, and battery pack.

2. Safety Guidelines

Your safety is paramount. Adhere to the following guidelines:

• Always wear a helmet and appropriate safety gear.
• Familiarize yourself with local traffic laws and regulations regarding electric bicycles.
• Perform a pre-ride inspection before each use, checking brakes, tires, and battery.
• Do not ride under the influence of alcohol or drugs.
• Avoid riding in adverse weather conditions or on excessively rough terrain if you are not experienced.
• Ensure the battery is securely locked in place before riding.

3. Setup and Assembly

The Gotrax EBE6 comes partially assembled. Follow these steps for final assembly and initial setup:

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
2. Handlebar Installation: Attach the handlebars to the stem, ensuring all bolts are tightened securely. Adjust the angle for comfortable riding posture.
3. Front Wheel Attachment: Install the front wheel, aligning the disc brake rotor correctly within the caliper. Secure the quick-release lever or axle nuts.
4. Pedal Installation: Identify left (L) and right (R) pedals. Thread them into the crank arms. Note that the left pedal has a reverse thread. Tighten firmly with a wrench.
5. Seat Post and Saddle Adjustment: Insert the seat post into the frame. Adjust the saddle height so your feet can comfortably touch the ground when stopped, or for optimal pedaling efficiency. Secure the quick-release clamp.
6. Initial Battery Charge: Before first use, fully charge the battery. Connect the charger to the battery port and then to a power outlet. The indicator light on the charger will change when fully charged.

Figure 2: Removable Battery. This image highlights the 48V 10.4Ah removable battery, which can be charged on or off the bike.

4. Operating Your EBE6 Electric Bike

The Gotrax EBE6 offers multiple riding modes for a versatile experience.

4.1 Riding Modes

• Pedal-Assist Mode (PAS): Provides electric assistance as you pedal. There are typically 5 levels of assistance, adjustable via the LCD display. This mode extends your range significantly.
• Pure Electric Mode: Use the throttle to propel the bike without pedaling. Ideal for quick bursts of speed or when you need a break from pedaling.
• Normal Bike Mode: The electric system is off, and the bike functions as a traditional bicycle. This mode is useful for exercise or when the battery is depleted.

Figure 3: Three Riding Modes. This image illustrates the different riding modes available on the EBE6, including Pedal-Assist (PAS), Pure Electric, and Sport (Normal Bike) modes, along with their approximate ranges.

4.2 Smart LCD Display

The multi-functional LCD display provides real-time information:

• Speed: Current riding speed.
• Gear/Assist Level: Indicates the current pedal-assist level (1-5).
• Battery Level: Shows remaining battery charge.
• Error Code: Displays diagnostic codes if an issue occurs.
• Mileage: Tracks total distance ridden.
• Headlight Status: Indicates if the headlight is on or off.

Figure 4: Smart LCD Display. This image shows the handlebar-mounted LCD display, which provides essential riding data at a glance.

4.3 Gear Shifting and Braking

The EBE6 is equipped with a Shimano 7-speed transmission system and dual disc brakes.

• Gear Shifting: Use the shifter on the handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.
• Braking: The dual disc brakes provide reliable stopping power. Apply both brake levers simultaneously for effective and controlled braking. Avoid sudden, hard braking, especially at high speeds.

Figure 5: Shimano 7-speed and Dual Disc Brakes. These images show the rear derailleur and cassette for gear changes, and the disc brake rotor and caliper for effective stopping.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your EBE6 electric bike.

• Battery Care:
  • Charge the battery fully after each ride, especially if it's been significantly depleted.
  • Avoid completely draining the battery before recharging.
  • If storing the bike for an extended period, charge the battery to about 50-70% and store it in a cool, dry place. Recharge every 1-2 months to prevent deep discharge.
  • Use only the official Gotrax charger provided with your bike.
• Tire Pressure: Check tire pressure regularly (before each ride is ideal). Maintain the recommended PSI (usually printed on the tire sidewall) for optimal performance and puncture resistance.
• Brake Inspection: Periodically check brake pads for wear and brake levers for proper tension. Adjust or replace as needed.
• Chain Lubrication: Keep the chain clean and lubricated to ensure smooth gear changes and prevent rust.
• General Cleaning: Clean the bike regularly with a damp cloth. Avoid using high-pressure washers directly on electrical components.
• Fastener Check: Periodically check all bolts and fasteners for tightness, especially on critical components like handlebars, wheels, and seat post.

6. Troubleshooting

This section addresses common issues you might encounter with your EBE6 electric bike.

For persistent issues or error codes displayed on the LCD, please contact Gotrax customer support.

7. Specifications

Key technical specifications for the Gotrax EBE6 Electric Bike:

Figure 6: Dimensions and Rider Specifications. This diagram provides detailed measurements of the bike and recommended rider height and weight limits.

8. Warranty and Support

Gotrax products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included with your purchase or visit the official Gotrax website for detailed warranty terms and conditions specific to your region.

For technical assistance, parts replacement, or any questions not covered in this manual, please contact Gotrax customer support:

• Website: www.gotrax.com
• Email: (Refer to website for current support email)
• Phone: (Refer to website for current support phone number)

When contacting support, please have your product model (EBE6) and purchase information readily available.