Introduction
This manual provides essential information for the safe and efficient use of your EGLO connect.z Smart LED Bulb (Model 12243). This smart bulb features an E27 base, G80 globe shape, and offers dimmable warm to cool white light (2700K-6500K) with 360 lumens brightness at 5 watts. It supports ZigBee for app and voice control, allowing seamless integration into compatible smart home systems.
Important Safety Instructions
- Always disconnect power before installing, removing, or cleaning the bulb.
- This bulb is designed for indoor use only.
- Do not use in fully enclosed luminaires as this may shorten the bulb's lifespan.
- Ensure the bulb is compatible with your fixture's voltage (220-240V) and base type (E27).
- Avoid looking directly at the light source when illuminated.
- Keep out of reach of children.
- Do not disassemble or modify the bulb.
Package Contents
- 1 x EGLO connect.z Smart LED Bulb (Model 12243)
Setup and Installation
1. Physical Installation
- Ensure the power to the light fixture is turned off at the main switch.
- Carefully screw the EGLO connect.z Smart LED Bulb into an E27 compatible light socket. Do not overtighten.
- Turn on the power to the light fixture. The bulb should illuminate.
Image: The EGLO connect.z Smart LED Bulb with a clear glass globe and visible spiral filament.
2. Smart Home Integration (ZigBee)
The EGLO connect.z bulb uses ZigBee technology for smart control. To integrate it with your smart home system (e.g., Philips Hue, Amazon Echo with built-in ZigBee hub), follow these general steps:
- Ensure your ZigBee gateway/hub is powered on and in pairing mode. Refer to your gateway's manual for specific instructions on how to enter pairing mode.
- With the EGLO connect.z bulb powered on, your gateway should detect it. If not, you may need to reset the bulb. To reset, turn the bulb off and on 5-6 times in quick succession until it flashes, indicating it's in pairing mode.
- Once detected, follow the prompts in your smart home app to add and configure the bulb.
Image: An EGLO connect.z Smart LED Bulb illuminating a bedroom space from a pendant fixture.
3. App Control
For full functionality, download the EGLO connect.z app from your device's app store. The app allows you to:
- Dim the light intensity.
- Adjust the color temperature from warm white (2700K) to cool white (6500K).
- Create custom scenes and favorite settings.
- Group multiple EGLO connect.z lights for synchronized control.
- Set timers for automatic on/off schedules.
Image: Product packaging highlighting app compatibility and features for the EGLO connect.z bulb.
Operating Your Smart LED Bulb
Power On/Off
The bulb can be turned on or off using a traditional wall switch or through the EGLO connect.z app/compatible smart home app.
Dimming
Adjust the brightness level of the bulb using the slider or controls within the EGLO connect.z app or your integrated smart home app.
Color Temperature Adjustment
Change the light's warmth or coolness via the app. Select from a range of 2700 Kelvin (warm white) to 6500 Kelvin (cool white) to suit your preference or activity.
Creating Scenes and Groups
Utilize the app's features to create personalized lighting scenes for different moods or activities. You can also group multiple EGLO connect.z bulbs to control them simultaneously.
Maintenance and Care
To maintain your EGLO connect.z Smart LED Bulb, ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the bulb's surface or internal components.
Troubleshooting
- Bulb not responding: Ensure the light fixture has power and the bulb is screwed in correctly. Check your smart home app for connectivity status.
- Bulb not found by smart home hub: Try resetting the bulb by turning it off and on 5-6 times in quick succession. This puts the bulb into pairing mode, allowing your hub to discover it.
- Limited functionality (e.g., only on/off): Ensure the bulb is properly paired with your ZigBee gateway and the EGLO connect.z app is up to date. Some hubs may offer limited control without the dedicated app.
- Flickering: Ensure the bulb is not used with an incompatible dimmer switch. This smart bulb is dimmable via app/smart home system, not typically with traditional wall dimmers.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | EGLO |
| Model Number | 12243 |
| Light Type | LED |
| Wattage | 5.5 Watts |
| Incandescent Equivalent | 33 Watts |
| Brightness | 360 Lumens |
| Bulb Base | E27 |
| Bulb Shape Size | G80 |
| Color Temperature | 2700K - 6500K (Warm to Cool White) |
| Voltage | 220-240 Volts |
| Control Method | App (ZigBee) |
| Material | Glass |
| Product Dimensions | 8 cm (Diameter) x 12 cm (Length) / 3.15 x 4.72 inches |
| Energy Efficiency Class | G |
Image: Dimensional drawing of the EGLO connect.z Smart LED Bulb.
Image: Energy label for the EGLO connect.z Smart LED Bulb.
For detailed product information and energy efficiency data, please refer to the EPREL database: https://eprel.ec.europa.eu/qr/990219
Warranty and Support
EGLO products are manufactured with high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official EGLO website.
For further assistance, technical support, or to view additional product information, please visit: www.eglo.com
