PRUNUS J-985

PRUNUS J-985 AM FM Pocket Radio Instruction Manual

Model: J-985

Introduction

This manual provides detailed instructions for the safe and efficient operation of your PRUNUS J-985 AM FM Pocket Radio. Please read this manual thoroughly before using the device and retain it for future reference.

Product Overview

The PRUNUS J-985 is a compact AM/FM pocket radio designed for portability and ease of use. It features a high-quality DSP chip for stable signal reception and operates on AAA batteries.

PRUNUS J-985 radio with labeled components: 3.5mm Earphone Jack, ON/OFF switch, Tuning Wheel, Volume Wheel, AM FM FM-ST Switch, Power Indicator.

Image: Front and side view of the PRUNUS J-985 radio, highlighting its key components such as the earphone jack, power switch, tuning dial, volume control, band switch, and power indicator light.

Key Components:

  • ON/OFF Switch: Powers the radio on or off.
  • Tuning Wheel: Adjusts the radio frequency to find stations.
  • Volume Wheel: Controls the audio output level.
  • Band Switch (AM/FM/FM-ST): Selects between AM, FM, and FM Stereo modes.
  • 3.5mm Earphone Jack: For connecting earphones. The earphone wire also functions as the FM antenna.
  • Power Indicator: Lights up when the radio is on.
  • Back Clip: For attaching the radio to clothing or a pocket.

Setup

1. Battery Installation

  1. Locate the battery compartment cover on the back of the radio.
  2. Slide or open the cover.
  3. Insert two (2) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

Note: Low battery levels can affect radio signal reception. Replace batteries when performance degrades or when the radio makes excessive hiss.

PRUNUS J-985 radio with two AAA batteries, illustrating battery operation and life.

Image: The PRUNUS J-985 radio next to two AAA batteries, demonstrating its battery-operated nature and indicating a battery life of approximately 37 hours.

2. Connecting Earphones

Insert your 3.5mm earphones into the earphone jack. The earphone wire serves as the antenna for FM reception, so ensure it is extended for optimal signal quality.

Operating Instructions

1. Power On/Off

Slide the ON/OFF switch to the "ON" position to power on the radio. The power indicator light will illuminate. Slide the switch to "OFF" to power off the radio.

2. Selecting a Band (AM/FM/FM-ST)

Use the Band Switch to select your desired frequency band:

  • AM: For Amplitude Modulation broadcasts.
  • FM: For Frequency Modulation broadcasts.
  • FM-ST: For FM Stereo broadcasts, providing rich stereo sound through earphones.

3. Tuning to a Station

Gently rotate the Tuning Wheel to scan for radio stations. The frequency dial will indicate the current frequency. Stop rotating when you find a clear signal.

Person holding PRUNUS J-985 radio, showing earphone wire as antenna and frequency ranges.

Image: A user holding the PRUNUS J-985 radio, demonstrating how the earphone wire acts as an antenna for enhanced reception across AM (530-1710KHz) and FM (87-108MHz) frequencies.

4. Adjusting Volume

Rotate the Volume Wheel up or down to increase or decrease the audio output level.

5. FM Stereo Mode

When the band switch is set to FM-ST and earphones are connected, the radio will deliver stereo sound. This mode is ideal for personal listening experiences.

Person wearing headphones, listening to PRUNUS J-985 radio in FM Stereo mode.

Image: A person wearing headphones, enjoying rich stereo sound from the PRUNUS J-985 radio in FM Stereo mode, illustrating the private listening experience.

Maintenance

1. Battery Replacement

Replace batteries promptly when the radio's performance declines or when the sound becomes distorted with excessive hiss. Always use two new AAA batteries.

2. Cleaning

Wipe the radio's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface.

3. Storage

If the radio will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device. Store in a cool, dry place.

Troubleshooting

  • No Power:
    • Check if the ON/OFF switch is in the "ON" position.
    • Ensure batteries are inserted correctly with proper polarity.
    • Replace old or depleted batteries with new ones.
  • Poor Reception/Static:
    • Extend the earphone wire fully, as it acts as the FM antenna.
    • Try repositioning the radio or moving to an open area.
    • Ensure batteries are not low, as low battery can affect signal quality.
    • For AM reception, rotate the radio for best signal.
  • No Sound:
    • Check if earphones are properly plugged into the jack.
    • Adjust the volume wheel.
    • Ensure the radio is tuned to an active station.

Specifications

ModelJ-985
Frequency RangeAM: 530-1710KHz, FM: 87-108MHz
Power Source2 x AAA Batteries
Dimensions (L x W x H)Approximately 86.8mm x 41.9mm x 18.1mm (3.42 x 1.65 x 0.71 inches)
WeightApproximately 40g (without batteries)
Included ComponentsPRUNUS J-985 Radio, Earphones, Back Clip
Connectivity TechnologyWired (Earphone)
PRUNUS J-985 radio with dimensions and weight indicated.

Image: The PRUNUS J-985 radio displayed with its compact dimensions (86.8mm height, 41.9mm width, 18.1mm depth) and light weight (39.2g), illustrating its pocket-sized design.

Warranty and Support

Warranty Information

PRUNUS products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or contact PRUNUS customer support.

Customer Support

If you encounter any issues or have questions regarding your PRUNUS J-985 radio that are not covered in this manual, please contact PRUNUS customer support through their official website or the retailer where the product was purchased.

© 2024 PRUNUS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.