1. Introduction
The BoxWave ClearTouch Crystal Screen Protector is designed to provide a protective layer for your TOGUARD CE35 device screen. This high-quality optical film offers 99% visual transparency, ensuring vibrant color display while shielding your screen from scratches and dust. This manual provides detailed instructions for proper installation, usage, and maintenance to ensure optimal performance and longevity of your screen protector.
2. Package Contents
Each BoxWave ClearTouch Crystal Screen Protector package includes the following items:
- Two (2) ClearTouch Crystal Screen Protectors
- One (1) ClearTouch Applicator Card
- One (1) Microfiber Cleaning Cloth
Image: Contents of the BoxWave ClearTouch Crystal Screen Protector package, showing the screen protectors, applicator card, and cleaning cloth.
3. Installation Guide
Follow these steps carefully for a bubble-free installation:
- Prepare Your Workspace: Ensure you are in a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils to the screen or protector.
- Clean the Device Screen: Use the included microfiber cleaning cloth to thoroughly clean the TOGUARD CE35 screen. Ensure all dust, smudges, and fingerprints are removed. For stubborn marks, a screen cleaner (not included) can be used, followed by drying with the microfiber cloth.
- Align the Protector: Carefully peel back a small portion of the protective layer (usually labeled '1' or 'back') from one corner of the screen protector. Align the exposed edge of the screen protector with the corresponding edge of your device screen. Ensure precise alignment with all cutouts (e.g., camera, sensors) before proceeding.
- Apply the Protector: Slowly and steadily peel back the remaining protective layer while simultaneously applying the screen protector to the device screen. Use the ClearTouch Applicator Card to gently smooth out any air bubbles as you go, pushing them towards the edges.
- Remove Top Layer: Once the screen protector is fully applied, carefully peel off the top protective layer (usually labeled '2' or 'front').
- Final Smoothing: Use the applicator card or the microfiber cloth to gently press down on the entire surface of the screen protector, ensuring all edges are adhered and any remaining small bubbles are pushed out.
Note: The special low-tack adhesive may take approximately 2 days of regular use to fully adhere around the edges, allowing any minor air gaps to clear out naturally.
Image: Visual representation of the screen protector's high definition clarity, maintaining vibrant colors.
4. Usage
Once installed, the ClearTouch Crystal Screen Protector functions as an invisible shield for your TOGUARD CE35 screen. It is designed to protect against scratches, dust, and minor impacts without compromising touch sensitivity or display clarity. Enjoy your device with enhanced screen protection.
5. Maintenance and Care
To maintain the clarity and effectiveness of your screen protector:
- Cleaning: Use the provided microfiber cleaning cloth to gently wipe the screen protector. For smudges, lightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While the protector offers scratch resistance, extreme pressure or sharp objects can still damage it.
- Reusability: The ClearTouch Crystal is designed with a glueless adhesive, allowing for reuse and reinstallation if needed. Ensure the adhesive side remains clean during removal and reapplication.
6. Troubleshooting
- Bubbles After Installation: Small bubbles or air gaps, especially around the edges, are common immediately after installation due to the low-tack adhesive. These typically dissipate within 2 days of regular use as the adhesive fully cures. Gently push larger bubbles towards the nearest edge with the applicator card.
- Dust Particles Under Protector: If dust particles are trapped, carefully lift the nearest corner of the screen protector, use a dust-removing sticker (not included, but often found with screen protectors) or a piece of tape to lift the dust, then reapply the protector.
- Misalignment: If the protector is significantly misaligned, carefully peel it off, clean both the device screen and the protector's adhesive side (if necessary), and attempt reinstallation following the steps above.
7. Product Specifications
| Feature | Detail |
|---|---|
| Brand | BoxWave |
| Model | ClearTouch Crystal |
| Compatibility | TOGUARD CE35 |
| Material | Polyethylene Terephthalate (PET) |
| Screen Surface Description | Glossy |
| Transparency | 99% Visual Transparency |
| Adhesive Type | Glueless, Low-Tack |
8. Warranty and Support
Specific warranty information for the BoxWave ClearTouch Crystal Screen Protector is not provided within this manual. For details regarding warranty coverage, returns, or technical support, please refer to the BoxWave official website or contact their customer service directly. Contact information can typically be found on the product packaging or the manufacturer's website.
